Experimental investigation of fuel starvation on industrial-sized solid oxide fuel cells using segmented cathodes and area specific resistances
Source abstract
Abstract
Fuel starvation must be detected timely to avoid anode oxidation, especially for industrial-sized Solid oxide fuel cells (SOFCs). In this work, a practical segmented cell measurement method is developed to detect fuel starvation occurring in local regions. For this developed method, the cathode of SOFCs is segmented, and only the voltage signal is measured in the segments. The local current-voltage (I–V) curve per segment is determined using the local voltage and the global I–V curve. Then, area specific resistance (ASR) is calculated and compared among segments to validate the data reliability. Varieties of current density loading rates and fuel flow rates are correspondingly investigated. Furthermore, fuel starvation is estimated using the rapid voltage drop in I–V curves and the rapid ASR increment in I-ASR curves. The results show that the intrinsic ASR increment is a more sensitive and robust criterion to identify the occurrence of fuel starvation than the voltage drop. This work will considerably benefit the progress of fuel starvation avoidance by setting a constant ASR threshold.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels [J]10.1016/j.enconman.2021.115175 ↗
2. Influence of fuel flow rate on the performance of micro tubular solid oxide fuel cell [J]10.1016/j.ijhydene.2020.03.042 ↗
3. Experimental investigation of in‐plane performance variation on anode supported solid oxide fuel cells using segmented cathodes and reference electrodes [J]10.1002/fuce.201900214 ↗
4. Rapid degradation mechanism of Ni-CGO anode in low concentrations of H2 at a high current density [J]10.1016/j.ijhydene.2011.04.046 ↗
5. Degradation of nickel–yttria-stabilized zirconia anode in solid oxide fuel cells under changing temperature and humidity conditions [J]10.1016/j.jpowsour.2014.03.031 ↗
6. Effects of operations and structural parameters on the one-cell stack performance of planar solid oxide fuel cell [J]10.1016/j.jpowsour.2009.06.009 ↗
7. Online total harmonic distortion analysis for solid oxide fuel cell stack monitoring in system applications [J]10.1002/fuce.201700230 ↗
8. Detection of fuel cell critical status by stack voltage analysis [J]10.1016/j.jpowsour.2006.01.009 ↗
9. Oxidation-induced degradation and performance fluctuation of solid oxide fuel cell Ni anodes under simulated high fuel utilization conditions [J]10.1016/j.ijhydene.2019.02.136 ↗
10. Condition monitoring of solid oxide fuel cells by fast electrochemical impedance spectroscopy: a case example of detecting deficiencies in fuel supply [J]10.1016/j.jpowsour.2021.229491 ↗
11. A practical approach for identifying various polarization behaviors of redox-stable electrodes in symmetrical solid oxide fuel cells [J]10.1016/j.electacta.2021.138340 ↗
12. Experimental investigations of cell resistances to characterize the concentration polarization behavior of 10× 10 cm2 solid oxide fuel cells[J]10.1016/j.jpowsour.2021.230678 ↗
13. Numerical investigation on the performance and detection of an industrial-sized planar solid oxide fuel cell with fuel gas leakage [J]10.1016/j.apenergy.2020.116426 ↗
14. Alternative Ni-impregnated mixed Ionic-electronic conducting anode for SOFC operation at high fuel utilization [J]10.1149/2.0071710jes ↗
15. A review of standardising SOFC measurement and quality assurance at FZJ [J]10.1016/j.jpowsour.2006.12.029 ↗
16. Study of SOFC-SOE transition on a RSOFC stack [J]10.1016/j.ijhydene.2017.08.159 ↗
17. The effect of coupled mass transport and internal reforming on modeling of solid oxide fuel cells part I: channel-level model development and steady-state comparison [J]10.1016/j.jpowsour.2015.11.043 ↗
18. The impact of flow distributors on the performance of planar solid oxide fuel cell [J]10.1016/j.jpowsour.2010.04.073 ↗
19. Methane-free biogas for direct feeding of solid oxide fuel cells [J]10.1016/j.jpowsour.2009.06.108 ↗
20. A comparative assessment on hydrogen production from low-and high-temperature electrolysis [J]10.1016/j.ijhydene.2013.01.065 ↗
21. Experimental analysis of SOFC fuelled by ammonia [J]10.1002/fuce.201300276 ↗
22. Theoretical study and performance evaluation of hydrogen production by 200 W solid oxide electrolyzer stack [J]10.1016/j.ijhydene.2014.04.052 ↗
23. Current density distributions in polymer electrolyte fuel cells: a tool for characterisation of gas distribution in the cell and its state of health [J]10.1016/j.ces.2018.03.055 ↗
24. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells [J]10.1016/j.jpowsour.2020.227836 ↗
25. Concentration gradient of reactants extending from reaction sites inward inlet periphery of fuel cells [J]10.1149/2.0871805jes ↗
26. Current and temperature distributions in-situ acquired by electrode-segmentation along a microtubular solid oxide fuel cell operating with syngas [J]10.1016/j.jpowsour.2015.06.024 ↗
27. In-situ diagnosis and assessment of longitudinal current variation by electrode-segmentation method in anode-supported microtubular solid oxide fuel cells [J]10.1016/j.jpowsour.2014.12.156 ↗
28. Local current measurement in a solid oxide fuel cell repeat element [J]10.1016/j.jeurceramsoc.2006.05.089 ↗
29. SOFC characteristics along the flow path [J]10.1016/j.ssi.2006.06.019 ↗
30. Understanding the current-voltage behavior of high temperature solid oxide fuel cell stacks [J]10.1149/2.1541713jes ↗
31. Analysis of electrochemical performance of SOFCs using polarization modeling and impedance measurements [J]10.1149/1.3046158 ↗