journal article·2023-02

Optimisation of Sb2S3 thin-film solar cells via Sb2Se3 post-treatment

Rui Wang, Deyang Qin, Xiaolei Ding, Qipei Zhang, Youyang Wang, Yanlin Pan, Guoen Weng, Xiaobo Hu, Jiahua Tao, Junhao Chu, Hidefumi Akiyama, Shaoqiang Chen

Publisher page

Abstract

In this work, Sb 2S 3 thin films are prepared by Vapour Transport Deposition (VTD) and solar cell devices with the superstrate structure of ITO/CdS/Sb 2S 3/Au are fabricated. In particular, an effective Sb 2Se 3 post-treatment method is developed for the optimisation of Sb 2S 3 thin-film cells without modifying the Sb 2S 3 main structure and phase. A device efficiency of 4.02% is reached by optimising the time of Sb 2Se 3 post-treatment with the augment of short-circuit current density ( J sc) and fill factor ( FF). Comparative studies of the electrical properties, carrier transport, and carrier recombination of cells with and without Sb 2Se 3 post-treatment are carried out in detail, including current density versus voltage ( J-V ) measurements under both light and dark conditions, energy-dispersive X-ray spectroscopy (EDX), deep-level transient spectroscopy (DLTS), and open-circuit voltage measurements at various temperatures and light intensity levels. The best-performing cells are Sb 2Se 3 post-treated cells, which have the least amount of parallel current pathways, the smallest amount of trap-assisted recombination, longer carrier lifetimes, and a benign distribution of elements with S-rich features. This study provides a unique strategy for realising the greater potential of chalcogenide thin-film solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The nanoscale distribution of copper and its influence on charge collection in CdTe solar cells10.1016/j.nanoen.2021.106595 ↗
2. Design and performance investigation of a highly efficient copper-indium-gallium-selenide solar cell10.1117/1.JNP.15.036006 ↗
3. Probing the significance of RF magnetron sputtering conditions on the physical properties of CdS thin films for ultra-thin CdTe photovoltaic applications10.1016/j.apsusc.2021.151640 ↗
4. An 8.7% efficiency co-electrodeposited Cu2ZnSnS4 photovoltaic device fabricated via a pressurized post-sulfurization process10.1039/C8TC05058A ↗
5. CuSbS2 as a promising earth-abundant photovoltaic absorber material: a combined theoretical and experimental study10.1021/cm500516v ↗
6. First-principles study of electronic structure of CuSbS2 and CuSbSe2 photovoltaic semiconductors10.1016/j.tsf.2014.11.089 ↗
7. Photovoltaic properties of SnS based solar cells10.1016/j.solmat.2006.06.012 ↗
8. Zeng · 2016 · 2
9. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
10. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth10.1016/j.solmat.2016.07.050 ↗
11. Composition engineering of Sb2S3 film enabling high performance solar cells10.1016/j.scib.2018.12.013 ↗
12. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
13. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy10.1002/adfm.201304238 ↗
14. 9.2%-Efficient core-shell structured antimony selenide nanorod array solar cells
15. Substrate structured Sb2S3 thin film solar cells fabricated by rapid thermal evaporation method10.1016/j.solener.2019.02.014 ↗
16. Quasi-vertically-orientated antimony sulfide inorganic thin-film solar cells achieved by vapor transport deposition10.1021/acsami.0c02697 ↗
17. A fast chemical approach towards Sb2S3 film with a large grain size for high-performance planar heterojunction solar cells10.1039/C7NR00154A ↗
18. Annealing temperature impact on Sb2S3 solar cells prepared by spin-coating method10.1016/j.matlet.2019.02.033 ↗
19. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
20. Sb2S3 thin films prepared by vulcanizing evaporated metallic precursors10.1016/j.matlet.2017.05.040 ↗
21. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber10.1039/C7TC02460F ↗
22. Heterojunction CdS/Sb2S3 solar cells using antimony sulfide thin films prepared by thermal evaporation10.1016/j.tsf.2014.08.024 ↗
23. Highly reproducible planar Sb2S3-sensitized solar cells based on atomic layer deposition10.1039/C4NR04148H ↗
24. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
25. Over 7 % efficiency of Sb2(S,Se)3 solar cells via V-shaped
26. Charge density dependent mobility of organic hole-transporters and mesoporous TiO2 determined by transient mobility spectroscopy: implications to dye-sensitized and organic solar cells10.1002/adma.201300947 ↗
27. Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro(TFSI)2 in perovskite and dye-sensitized solar cells10.1021/ja504539w ↗
28. Improving the performance of Sb2S3 thin-film solar cells by optimization of VTD source-substrate proximity10.1016/j.solener.2021.03.052 ↗
29. Bandgap of thin film solar cell absorbers: a comparison of various determination methods10.1016/j.tsf.2018.11.017 ↗
30. Investigation of electronic transport mechanisms in Sb 2 Se 3 thin-film solar cells10.1016/j.solmat.2019.04.003 ↗
31. Controllable orientations for Sb2S3 solar cells by vertical VTD method10.1002/pip.3278 ↗
32. A new mass production technology for high-efficiency thin-film CIS-absorber formation10.1109/JPHOTOV.2014.2302235 ↗
33. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics10.1038/s41467-021-23592-0 ↗
34. Yield predictions for photovoltaic power plants:empirical validation,recent advances and remaining uncertainties10.1002/pip.1160 ↗
35. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
36. Intrinsic defect limit to the electrical conductivity and a two-step p-type doping strategy for overcoming the efficiency bottleneck of Sb2S3-based solar cells10.1002/solr.201900503 ↗
37. Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation10.1063/1.5090773 ↗
38. High resolution XPS study of the large-band-gap semiconductor stibnite (Sb2S3): structural contributions and surface reconstruction10.1016/j.susc.2005.10.034 ↗
39. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
40. Reformulation of solar cell physics to facilitate experimental separation of recombination pathways10.1063/1.4819728 ↗
41. Investigation of correlation between open-circuit voltage deficit and carrier recombination rates in Cu(In,Ga)(S,Se)2-based thin-film solar cells10.1063/1.5023828 ↗
42. From 20.9 to 22.3% Cu(In,Ga)(S,Se)2 solar cell: reduced recombination rate at the heterojunction and the depletion region due to K-treatment
43. Structures of Cu(In,Ga)(S,Se)2 solar cells for minimizing open-circuit voltage deficit: investigation of carrier recombination rates10.1002/pip.3137 ↗