journal article·2022-10Open access

Performance of polymer electrolyte fuel cell under wet/dry conditions with hydrophilic and hydrophobic electrospun microporous layers

Xin Li, Ruiliang Liu, Ming Yao, Jianbo Zhang, Yong Liu

Abstract

The electrospinning method is used to fabricate the microporous layers (MPL). The hydrophobic and hydrophilic electrospun MPLs (E-MPLs) are realized by using acetylene black and pigmented carbon black in the electrospinning ink, respectively. Scanning electron microscope shows that the E-MPLs have three-dimensional inter-connected pore structure formed by disordered nanofibers . Mercury intrusion porosimetry results indicate that the E-MPLs have larger porosity (more than 85%) and wider pore size distribution (0.8–4 μm) compared with the commercial MPL (from SGL 29BC). Hydrophobic E-MPL exhibits lower mass transport resistance at 100% relative humidity (RH) due to its larger pore size and better water drainage capability, while the hydrophilic E-MPL shows lower ohmic resistance at 40% RH due to its higher water retention capability. Fuel cell with a double-layer E-MPL, an integrated MPL containing a hydrophilic layer and a hydrophobic layer, is found to perform well under wider RH range . The fuel cell with double-layer E-MPL is found to have a better dynamic response to a current step, in that it has lower amplitude of voltage undershoot and overshoot, and reaches a steady state more quickly.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Water transport in polymer electrolyte membrane fuel cell: degradation effect of gas diffusion layer10.1002/er.7782 ↗
2. Exploration of the polarization curve for proton-exchange membrane fuel cells10.1021/acsami.1c20289 ↗
3. Efficient and durable gas diffusion electrode for proton exchange membrane fuel cell via in-situ growth of Pt nanowires on dual microporous layer10.1016/j.jpowsour.2022.231153 ↗
4. Natural wood derived robust carbon sheets with perpendicular channels as gas diffusion layers in air-breathing proton exchange membrane fuel cells (PEMFCs)10.1016/j.catcom.2021.106351 ↗
5. Liquid water preferential accumulation in channels of PEM fuel cells with multiple serpentine flow fields10.1016/j.ijhydene.2014.07.101 ↗
6. Overall and local effects of operating parameters on water management and performance of open-cathode PEM fuel cells10.1016/j.apenergy.2022.118978 ↗
7. Neutron imaging of generated water inside polymer electrolyte fuel cell using newly-developed gas diffusion layer with gas flow channels during power generation10.1016/j.jpowsour.2022.231251 ↗
8. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes10.1016/j.jpowsour.2006.03.077 ↗
9. Transient response of performance in a proton exchange membrane fuel cell under dynamic loading10.1016/j.enconman.2020.113492 ↗
10. Effect of the micro porous layer design on the dynamic performance of a proton exchange membrane fuel cell10.1016/j.ijhydene.2013.10.041 ↗
11. Three-dimensional numerical study of a cathode gas diffusion layer with a through/in plane synergetic gradient porosity distribution for PEM fuel cells10.1016/j.ijheatmasstransfer.2022.122661 ↗
12. Ultralow Pt doped on N-based carbon as a promising electrocatalyst for high-temperature proton exchange membrane fuel cells10.1021/acsaem.1c01898 ↗
13. A review of membranes in proton exchange membrane fuel cells: transport phenomena, performance and durability10.1016/j.rser.2021.110771 ↗
14. Structurally modulated and functionalized carbon nanotubes as potential filler for Nafion matrix toward improved power output and durability in proton exchange membrane fuel cells operating at reduced relative humidity10.1016/j.memsci.2022.120393 ↗
15. Constructing proton exchange membranes with high and stable proton conductivity at subzero temperature through vacuum assisted flocculation technique10.1016/j.apsusc.2022.152579 ↗
16. Transport properties of gas diffusion layer of proton exchange membrane fuel cells: effects of compression10.1016/j.ijheatmasstransfer.2021.121608 ↗
17. Study on transmission coefficients anisotropy of gas diffusion layer in a proton exchange membrane fuel cell
18. Mitigation of mechanical membrane degradation in fuel cells – Part 1: gas diffusion layers with low surface roughness
19. Laser structured gas diffusion layers for improved water transport and fuel cell performance10.1021/acsaem.1c02454 ↗
20. Failure behavior of gas diffusion layer in proton exchange membrane fuel cells10.1016/j.jpowsour.2021.230655 ↗
21. Influence of the gas diffusion layer on the performance of an open cathode polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2021.12.151 ↗
22. Recent progress of the gas diffusion layer in proton exchange membrane fuel cells: material and structure designs of microporous layer10.1016/j.ijhydene.2020.10.185 ↗
23. Improvement of polymer electrolyte fuel cell performance by gas diffusion layer with relatively hydrophilic surface10.1016/j.jpowsour.2021.230730 ↗
24. Droplet dynamics in a proton exchange membrane fuel cell flow field design with 3D geometry10.1016/j.ijhydene.2021.03.049 ↗
25. A review of the microporous layer in proton exchange membrane fuel cells: materials and structural designs based on water transport mechanism10.1016/j.rser.2021.111998 ↗
26. An approach to modeling two-phase transport in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2007.09.029 ↗
27. A review of gas diffusion layers for proton exchange membrane fuel cells—with a focus on characteristics, characterization techniques, materials and designs10.1016/j.pecs.2019.05.002 ↗
28. Alternative architectures and materials for PEMFC gas diffusion layers: a review and outlook10.1016/j.rser.2022.112640 ↗
29. Optimization of cathode microporous layer materials for proton exchange membrane fuel cell10.1016/j.ijhydene.2021.01.169 ↗
30. Optimized microporous layer for improving polymer exchange membrane fuel cell performance using orthogonal test design10.1016/j.apenergy.2019.113714 ↗
31. Water transport and PEFC performance with different interface structure between micro-porous layer and catalyst layer10.1149/2.0451605jes ↗
32. Effects of ratio variation in substrate and micro porous layer penetration on polymer exchange membrane fuel cell performance10.1016/j.ijhydene.2021.03.029 ↗
33. Microporous layer to carbon fibre substrate interface impact on polymer electrolyte membrane fuel cell performance10.1016/j.jpowsour.2019.02.099 ↗
34. Water management characteristics of electrospun micro-porous layer in PEMFC under normal temperature and cold start conditions10.1016/j.ijhydene.2020.05.271 ↗
35. Enhanced low-humidity performance in a proton exchange membrane fuel cell by developing a novel hydrophilic gas diffusion layer10.1016/j.ijhydene.2019.10.160 ↗
36. Impact of cathode fabrication on fuel cell performance10.1149/2.064401jes ↗
37. Sulfonated-fluorinated copolymer blending membranes containing SPEEK for use as the electrolyte in polymer electrolyte fuel cells (PEFC)10.1016/j.ijhydene.2016.11.161 ↗
38. PEFC catalyst layers: effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability10.1016/j.coelec.2020.02.019 ↗
39. Humidity and temperature dependences of oxygen transport resistance of nafion thin film on platinum electrode10.1016/j.electacta.2016.04.023 ↗
40. Study on water transport in hydrophilic gas diffusion layers for improving the flooding performance of polymer electrolyte fuel cells10.1016/j.ijhydene.2020.11.202 ↗
41. Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode10.1016/j.jpowsour.2011.10.002 ↗
42. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
43. Transport and electrochemical interface properties of ionomers in low-Pt loading catalyst layers: effect of ionomer equivalent weight and relative humidity10.3390/molecules25153387 ↗
44. Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification10.1016/j.jpowsour.2018.08.062 ↗
45. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
46. Planar-distributed wettability of microporous layer of polymer electrolyte fuel cell to improve cold start performance10.1016/j.jpowsour.2019.226930 ↗
47. Performance enhancement of polymer electrolyte membrane fuel cells with a hybrid wettability gas diffusion layer10.1016/j.enconman.2020.113297 ↗
48. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
49. Novel hydrophilic and hydrophobic double microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells under both low and high humidity10.1016/j.jpowsour.2013.01.150 ↗
50. Mitigation strategies for hydrogen starvation under dynamic loading in proton exchange membrane fuel cells10.1016/j.enconman.2017.02.051 ↗
51. Understanding PEM fuel cell dynamics: the reversal curve10.1016/j.ijhydene.2017.05.087 ↗
52. Diffusion parameter correlations for PEFC gas diffusion layers considering the presence of a water-droplet10.1016/j.ijhydene.2019.08.144 ↗
53. Electrospinning and electrospun nanofibers: methods, materials, and applications10.1021/acs.chemrev.8b00593 ↗
54. Managing the pore morphologies of microporous layers for polymer electrolyte fuel cells with a solvent-free coating technique10.1021/acssuschemeng.1c02105 ↗
55. Cold start capability and durability of electrospun catalyst layer for proton exchange membrane fuel cell10.1016/j.ijhydene.2020.06.032 ↗
56. Microarchitecture of polyvinylidene fluoride-bound self-standing microporous layer and its implication to water management in fuel cells10.1016/j.jpowsour.2021.230129 ↗
57. Improving water management in fuel cells through microporous layer modifications: fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
58. Recent progress of gas diffusion layer in proton exchange membrane fuel cell: two-phase flow and material properties10.1016/j.ijhydene.2020.12.076 ↗
59. A review of proton exchange membrane fuel cell water management: membrane electrode assembly10.1016/j.jpowsour.2021.230723 ↗
60. Wettability and spontaneous penetration of a water drop into hydrophobic pores10.1016/j.jcis.2016.05.029 ↗
61. Beginning‐of‐life MEA performance—efficiency loss contributions10.1002/9780470974001.f303051 ↗
62. Elementary mechanisms in electrocatalysis: revisiting the ORR tafel slope10.1149/2.022211jes ↗
63. Tafel kinetics of electrocatalytic reactions: from experiment to first-principles10.1021/cs501312v ↗
64. Empirical correlations for the performance of a PEFC considering relative humidity of fuel and oxidant gases10.1016/j.ijhydene.2019.09.098 ↗
65. Composites Nafion-titania membranes for Polymer Electrolyte Fuel Cell (PEFC) applications at low relative humidity levels: chemical physical properties and electrochemical performance10.1016/j.polymertesting.2016.09.015 ↗
66. Investigation of the effect of a hydrophilic layer in the gas diffusion layer of a polymer electrolyte membrane fuel cell on the cell performance and cold start behaviour10.1016/j.electacta.2013.12.050 ↗