journal article·2022-09Open access

Anodic WO3 layers sensitized with hematite operating under the visible light spectrum

Marta Zych, Karolina Syrek, Marcin Pisarek, Grzegorz D. Sulka

Abstract

Tungsten oxide has been considered one of the most promising photoanode materials for photoelectrochemical (PEC) water splitting. WO 3 possesses a relatively narrow band gap (2.5–2.8 eV) and superior charge transport properties. In this paper, for the first time, anodic WO 3 layers were sensitized with Fe 2O 3 by electrodeposition and re-annealing method. The influence of FeCl 3 concentration in the electrolyte used for the electrodeposition process on the morphology, semiconducting and photoelectrochemical properties was investigated. Since the band gap of hematite is narrower when compared to tungsten oxide, its modification/sensitization with hematite is a promising way to transfer WO 3 photoactivity to the visible light region. To sum up, a successfully performed synthesis of Fe 2O 3-WO 3 and Fe 2O 3–C,N-WO 3 heterojunctions resulted in a shift of the material photoresponse towards the visible light region even to the wavelength of 550 nm. The best results were achieved for the Fe 2O 3–C,N-WO 3 sample, that exhibits IPCE values about 1.6 times higher at 450 nm and 12 times higher at 480 nm in comparison to pristine anodic WO 3.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Iron oxide chemistry and applications · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Improving photoelectrochemical properties of anodic WO3 layers by optimizing electrosynthesis conditions10.3390/molecules25122916 ↗
2. In situ formation of CuWO4/WO3 heterojunction plates array films with enhanced photoelectrochemical properties10.1016/j.ijhydene.2015.03.131 ↗
3. Molybdenum doped CuWO4 nanoflake array films as an efficient photoanode for solar water splitting10.1016/j.electacta.2019.04.044 ↗
4. Electrochemically-synthesized tungstate nanocomposites g-WO3/CuWO4 and g-WO3/NiWO4 thin films with improved band gap and photoactivity for solar-driven photoelectrochemical water oxidation10.1016/j.jallcom.2018.05.147 ↗
5. Structure and photocatalytic activity of thin-walled CuWO4 nanotubes: an experimental and DFT study10.1016/j.matlet.2019.06.109 ↗
6. Facile preparation of CuWO4 porous films and their photoelectrochemical properties, Electrochim
7. Influence of precursor concentration and deposition temperature on the photoactivity of hematite electrodes for water splitting10.1016/j.mtcomm.2020.101459 ↗
8. Effect of ferroelectric poling on the photoelectrochemical activity of hematite-BaTiO3 nanowire arrays10.1016/j.ijhydene.2021.08.152 ↗
9. All-electrochemically synthesized tin and nickel oxide-modified hematite as photo-electrocatalyst anodes for solar-driven water splitting10.1016/j.jcat.2020.08.014 ↗
10. Using hematite for photoelectrochemical water splitting: a review of current progress and challenges10.1039/C5NH00098J ↗
11. The influence of morphology of electrodeposited Cu2O and Fe2O3 on the conversion efficiency of TiO2 nanotube photoelectrochemical solar cells, Electrochim
12. Tuning the morphology and structure of disordered hematite photoanodes for improved water oxidation: a physical and chemical synergistic approach10.1016/j.nanoen.2018.09.048 ↗
13. Photoelectrochemical water oxidation performance promoted by a cupric oxide-hematite heterojunction photoanode10.1016/j.ijhydene.2020.09.091 ↗
14. Nanoscale heterostructures based on Fe2O3@WO3-x nanoneedles and their direct integration into flexible transducing platforms for toluene sensing10.1021/acsami.5b05081 ↗
15. Photodegradation of reactive blue 19 dye using magnetic nanophotocatalyst α-Fe2O3/WO3: a comparison study of a-Fe2O3/WO3 and WO3/NaOH10.1016/j.wse.2021.06.007 ↗
16. Synthesis of Fe2O3/WO3 nanocomposites with enhanced sensing performance to acetone10.1016/j.cplett.2018.12.016 ↗
17. 3D core-shell WO3@a-Fe2O3 photoanode modified by ultrathin FeOOH layer for enhanced photoelectrochemical performances10.1016/j.jallcom.2020.154992 ↗
18. Degradation of aqueous organic pollutants using an Fe2O3/WO3 composite photocatalyst as a magnetically separable peroxymonosulfate activator10.1016/j.seppur.2021.118610 ↗
19. Enhanced performance of γ-Fe2O3:WO3 nanocomposite towards selective acetone vapor detection10.1016/j.ceramint.2016.01.127 ↗
20. Photoelectrochemical splitting of natural seawater with α-Fe2O3/WO3 nanorod arrays10.1016/j.ijhydene.2016.01.027 ↗
21. The effect of anodization conditions on the morphology of porous tungsten oxide layers formed in aqueous solution10.1016/j.jelechem.2018.09.054 ↗
22. Formation and characterization of iron oxide nanoparticles loaded on self-organized TiO2 nanotubes, Electrochim
23. Influence of annealing conditions on anodic tungsten oxide layers and their photoelectrochemical activity10.1016/j.electacta.2017.02.039 ↗
24. Synthesis and characterization of anodic WO3 layers in situ doped with C, N during anodization10.1016/j.electacta.2022.140061 ↗
25. Synthesis of oxygen vacancies implanted ultrathin WO3-x nanorods/reduced graphene oxide anode with outstanding Li-ion storage10.1007/s10853-020-05747-4 ↗
26. Multifunctional electrochromic energy storage devices by chemical cross-linking: impact of a WO3·H2O nanoparticle-embedded chitosan thin film on amorphous WO3 films10.1038/s41427-019-0193-z ↗
27. The origin of hematite nanowire growth during the thermal oxidation of iron10.1016/j.mseb.2011.12.034 ↗
28. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
29. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
30. Tungsten oxide single crystal nanosheets for enhanced multichannel solar light harvesting10.1002/adma.201404792 ↗
31. Nanostructured photoelectrodes based on WO3: applications to photooxidation of aqueous electrolytes10.1039/C2CS35373C ↗
32. Oxygen vacancy engineering of WO3 toward largely enhanced photoelectrochemical water splitting10.1016/j.electacta.2018.04.109 ↗
33. UV-Vis-induced degradation of phenol over magnetic photocatalysts modified with Pt, Pd, Cu and Au nanoparticles10.3390/nano8010028 ↗
34. Band gap engineering of nanotubular Fe2O3-TiO2 photoanodes by wet impregnation10.1016/j.apsusc.2020.146195 ↗
35. Reactive and morphological trends on porous anodic TiO2 substrates obtained at different annealing temperatures10.1016/j.ijhydene.2019.11.213 ↗
36. Visible-light sensitization of anodic tungsten oxide layers with CuWO410.1016/j.electacta.2020.137591 ↗
37. Iron based photoanodes for solar fuel production10.1039/c3cp55174a ↗
38. Achievements and trends in photoelectrocatalysis: from environmental to energy applications10.1007/s12678-015-0259-9 ↗
39. Review of material design and reactor engineering on TiO2 photocatalysis for CO2 reduction10.1016/j.jphotochemrev.2015.06.001 ↗
40. Visible-light photocurrent response of TiO2–polyheptazine hybrids: evidence for interfacial charge-transfer absorption10.1039/c1cp22861g ↗
41. Preparation and photoelectrocatalytic activity of a nano-structured WO3 platelet film10.1016/j.jssc.2007.11.018 ↗
42. Photoelectrochemical properties of anodic iron oxide layers10.1016/j.jelechem.2022.116143 ↗
43. Dark nanostructured ZnO films formed by anodic oxidation as photoanodes in photoelectrochemical water splitting10.1016/j.electacta.2022.140176 ↗
44. An electrochemical strategy of doping Fe3+ into TiO2 nanotube array films for enhancement in photocatalytic activity10.1016/j.solmat.2009.07.001 ↗
45. Nanotube array-like WO3/W photoanode fabricated by electrochemical anodization for photoelectrocatalytic overall water splitting10.1016/S1872-2067(17)62948-6 ↗
46. Synthesis of the nanostructured WO3 via anodization at elevated temperature for H2 sensing applications10.1016/j.proeng.2011.12.061 ↗