journal article·2022-09Open access

Enhanced cycle performance and synthesis of LiNi0.6Co0.2Mn0.2O2 single-crystal through the assist of Ba ion

Guorong Hu, Shuai Zhang, Ke Du, Zhongdong Peng, Jingyao zeng, Zijun Fang, Luyu Li, Yinjia Zhang, Jiangnan Huang, Dichang Guan, Min Huang, Xudong Zhang, Yanbing Cao

Abstract

The single-crystal materials of Ni-based layered oxides have drawn in wide consideration due to excellent cycle performance and storage performance. However, the conditions for synthesizing Ni-based layered oxides with a single-crystal morphology are extremely demanding. In this research, Ba 2+ is introduced into the synthesis process of LiNi 0 . 6 Co 0 . 2 Mn 0 . 2 O 2 single-crystal material (SC-NCM) to assist the formation of single-crystal materials. Furthermore, this work proposes an inference that the introduction of Ba 2+ reduces the diffusion energy at the grain boundaries of the cathode particles, promoting particle coalescence. The role of Ba 2+ in this system is investigated using X-ray diffraction, scanning electron microscope , energy-dispersive x-ray spectroscopy, transmission electron microscopy , thermogravimetric analysis and differential thermal analysis . As a consequence, introducing Ba 2+ promotes the formation of single crystal morphology and improves the cycle performance of the cathode.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Ferroelectric and Piezoelectric Materials · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
2. Prospect and reality of Ni-rich cathode for commercialization
3. An unavoidable challenge for Ni-rich positive electrode materials for lithium-ion batteries10.1021/acs.chemmater.9b02372 ↗
4. Micron-sized monocrystalline LiNi1/3Co1/3Mn1/3O2 as high-volumetric-energy-density cathode for lithium-ion batteries10.1039/C8TA03363C ↗
5. Chemomechanical behaviors of layered cathode materials in alkali metal ion batteries10.1039/C8TA06875E ↗
6. Suppressing the structure deterioration of Ni-rich LiNi0.8Co0.1Mn0.1O2 through atom-scale interfacial integration of self-forming hierarchical spinel layer with Ni gradient concentration10.1021/acsami.7b08802 ↗
7. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
8. Synthesis and characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the microscale core−shell structure as the positive electrode material for lithium batteries10.1021/ja053675g ↗
9. Enhanced cycling stability of boron-doped lithium-rich layered oxide cathode materials by suppressing transition metal migration10.1039/C8TA10786F ↗
10. Improvement of the electrochemical performance of an NCA positive-electrode material of lithium ion battery by forming an Al-rich surface layer10.1016/j.ceramint.2017.04.080 ↗
11. Synthesis and electrochemical properties of LiNi0.87Co0.10Mg0.03O2 cathode materials10.1016/S1003-6326(15)63634-2 ↗
12. Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile10.1016/j.electacta.2021.138440 ↗
13. SiO2-coated LiNi0.915Co0.075Al0.01O2 cathode material for rechargeable Li-ion batteries10.1039/C6NR07438C ↗
14. Fabrication of FePO4 layer coated LiNi1/3Co1/3Mn1/3O2: towards high-performance cathode materials for lithium ion batteries10.1016/j.electacta.2012.07.111 ↗
15. Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2 lithium battery electrode with improved cycling performance at 55°C10.1016/j.jpowsour.2011.04.007 ↗
16. Effects of surface modification by MgO on interfacial reactions of lithium cobalt oxide thin film electrode10.1016/j.jpowsour.2004.05.029 ↗
17. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
18. Simultaneous enhancement of interfacial stability and kinetics of single-crystal LiNi0.6Co0.2Mn0.2O2 through optimized surface coating and doping10.1021/acs.nanolett.0c03778 ↗
19. Single-crystal based studies for correlating the properties and high-voltage performance of Li[NixMnyCo1−x−y]O2 cathodes10.1039/C8TA10329A ↗
20. Understanding the effect of local short-range ordering on lithium diffusion in Li1.3Nb0.3Mn0.4O2 single-crystal cathode10.1016/j.chempr.2018.05.008 ↗
21. Ni0.6Co0.2Mn0.2(OH)2 with dispersed hexagonal slabs enables synthesis of single crystal LiNi0.6Co0.2Mn0.2O2 with enhanced electrochemical performance for lithium-ion batteries10.1016/j.jallcom.2021.159839 ↗
22. Synthesis of single crystal LiNi0.92Co0.06Mn0.01Al0.01O2 cathode materials with superior electrochemical performance for lithium ion batteries10.1149/1945-7111/abacea ↗
23. Synthesis of single crystal LiNi0.5Co0.2Mn0.3O2 for lithium ion batteries10.1149/2.0401714jes ↗
24. Flux preparation of LiNi0.6Co0.2Mn0.2O2 micron‐sized crystals as cathode materials for highly reversible lithium storage10.1002/er.5538 ↗
25. Unravelling the influence of quasi single-crystalline architecture on high-voltage and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode for lithium-ion batteries10.1016/j.cej.2020.124709 ↗
26. Novel concentration gradient LiNi0.815Co0.15Al0.035O2 microspheres as cathode material for lithium ion batteries10.1016/j.ceramint.2019.06.196 ↗
27. Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture10.1016/j.ensm.2020.01.027 ↗
28. Synthesis of single crystal LiNi0.88Co0.09Al0.03O2 with a two-step lithiation method10.1149/2.0681910jes ↗
29. Synthesis and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 as a concentration-gradient cathode material for lithium batteries10.1016/j.cclet.2014.04.005 ↗
30. Facile and efficient fabrication of Li3PO4-coated Ni-rich cathode for high-performance lithium-ion battery10.1016/j.apsusc.2019.144506 ↗
31. Studies on stability and capacity for long-life cycle performance of LiNi0.5Co0.2Mn0.3O2 by Mo modification for lithium-ion battery10.1016/j.jpowsour.2017.05.013 ↗
32. Effect of Mg doping on the structural and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials10.1016/j.electacta.2015.09.151 ↗
33. SrCO3 assisted synthesis of disk-like micron-sized monocrystalline LiNi0.5Co0.2Mn0.3O2 with preferred (104) plane and its enhanced cycle performance10.1149/1945-7111/abc032 ↗
34. Electrochemical stabilities of surface aluminum-doped LiNi0.5Co0.2Mn0.3O2 single crystals under different cutoff voltages10.1016/j.jelechem.2019.02.051 ↗
35. Understanding the role of Na-doping on Ni-rich layered oxide LiNi0.5Co0.2Mn0.3O210.1016/j.jallcom.2016.07.230 ↗
36. X-ray photoelectron (XPS) and Diffuse Reflectance Infra Fourier Transformation (DRIFT) study of Ba0.5Sr0.5CoxFe1−xO3−δ (BSCF: x=0–0.8) ceramics10.1016/j.jssc.2011.06.016 ↗
37. XPS spectra of Ca, Sr, Ba and their oxides10.1016/0368-2048(80)85055-9 ↗
38. Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗
39. Polycrystalline and single crystalline NCM cathode materials—quantifying particle cracking, active surface area, and lithium diffusion10.1002/aenm.202003400 ↗
40. Capacity fading of Ni-rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗