journal article·2022-06

In-situ analysis of anode atmosphere in a flat-tube solid oxide fuel cell operated with dry reforming of methane

Gang Yang, Yuqing Li, Junkang Sang, Anqi Wu, Jun Yang, Tongxiang Liang, Jingxiang Xu, Wanbing Guan, Maorong Chai, Subhash C. Singhal

Publisher page

Abstract

In-situ characterization of solid oxide fuel cells (SOFCs) under operating conditions is of great significance to mechanism studies on performance or long-term stability. In this study, real-time visualization of the two-dimensional gas distribution inside a large flat-tube SOFC is realized by built-in gas sampling tubes combined with external gas chromatography, validated by simulating calculation. The gas composition inside anode of the cell fueled with CH 4/CO 2 is in-situ monitored during a 1000-h discharge test. Decrease in catalytic activity for methane dry reforming during the long-term test differs at different region of the cell, and is related with local carbon deposition and sintering of Ni particles. Based on these experimental results, the mechanism of cell performance degradation of the large flat-tube SOFCs under methane dry reforming conditions is discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Recent progress in metal-ceramic anode of solid oxide fuel cell for direct hydrocarbon fuel utilization: a review
2. Direct internal methane reforming in biogas fuelled solid oxide fuel cell; the influence of operating parameters10.1002/ese3.887 ↗
3. Direct reforming of Methane-Ammonia mixed fuel on Ni-YSZ anode of solid oxide fuel cells10.1016/j.ijhydene.2020.01.073 ↗
4. Direct alcohol-fueled low-temperature solid oxide fuel cells: a review10.1002/ente.201700777 ↗
5. Biohythane as an energy feedstock for solid oxide fuel cells10.1016/j.ijhydene.2019.08.256 ↗
6. Utilization of glycerol and its derivatives in a nickel-based SOFC10.1002/ente.201800549 ↗
7. Progress in Ni-based anode materials for direct hydrocarbon solid oxide fuel cells10.1007/s10853-018-2205-8 ↗
8. SOFC-APU systems for aircraft: a review10.1016/j.ijhydene.2018.07.004 ↗
9. D.L. Tran, A. Kubota, M. Sakamoto, Q.T. Tran, K. Sasaki, Y. Shiratori, Advanced direct internal reforming concepts for solid oxide fuel cells running with biogas, in: S.C. Singhal, T. Kawada (Eds.) Solid Oxide Fuel Cells 152017, pp. 2467-2476.10.1149/07801.2467ecst ↗
10. Durable direct ethanol anode-supported solid oxide fuel cell10.1016/j.apenergy.2017.04.086 ↗
11. SOFC operation with real biogas10.1002/fuce.201700031 ↗
12. Development of novel anode material for intermediate temperature SOFC (IT-SOFC)10.1039/C6TA03404G ↗
13. A highly active CH4 catalyst correlated with solid oxide fuel cell anode performance10.1039/D0TA10672K ↗
14. Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation10.1016/j.jpowsour.2021.230536 ↗
15. SOFC system with integrated catalytic fuel processing10.1016/S0378-7753(99)00496-6 ↗
16. Internal reforming SOFC running on biogas10.1016/j.ijhydene.2010.05.064 ↗
17. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
18. Fuel flexibility: a key challenge for SOFC technology10.1016/j.fuel.2012.07.031 ↗
19. Durability of anode supported Solid Oxides Fuel Cells (SOFC) under direct dry-reforming of methane10.1016/j.cej.2013.01.003 ↗
20. Recent progress on solid oxide fuel cell: lowering temperature and utilizing non-hydrogen fuels10.1016/j.ijhydene.2013.07.077 ↗
21. Performance and environmental study of a biogas-fuelled solid oxide fuel cell with different reforming approaches10.1016/j.energy.2017.06.125 ↗
22. Performance degradation prediction of direct internal reforming solid oxide fuel cell due to Ni-particle coarsening in composite anode10.1016/j.enconman.2021.113902 ↗
23. Evaluating the drop of electrochemical performance of Ni/YSZ and Ni/ScSZ solid oxide fuel cells operated with dry biogas10.1002/er.6233 ↗
24. Experimental and modeling study of high performance direct carbon solid oxide fuel cell with in situ catalytic steam-carbon gasification reaction10.1016/j.jpowsour.2018.02.033 ↗
25. Relation between Ni particle shape change and Ni migration in Ni-YSZ electrodes - a hypothesis10.1002/fuce.201600222 ↗
26. Effect of carbon deposition by carbon monoxide disproportionation on electrochemical characteristics at low temperature operation for solid oxide fuel cells10.1016/j.jpowsour.2011.01.061 ↗
27. Electrical conductivity of Ni-YSZ composites: degradation due to Ni particle growth10.1016/j.ssi.2011.02.001 ↗
28. High-temperature “spectrochronopotentiometry”: correlating electrochemical performance with in situ Raman spectroscopy in solid oxide fuel cells10.1021/ac301504g ↗
29. In operando visualization of SOFC electrodes by thermography and visible light imaging10.1149/2.0031511eel ↗
30. In operando optical study of active three phase boundary of nickel-yttria stabilized zirconia solid-oxide fuel cell anode under polarization10.1016/j.jpowsour.2018.06.001 ↗
31. Experimental investigation of temperature distribution of planar solid oxide fuel cell: effects of gas flow, power generation, and direct internal reforming10.1016/j.ijhydene.2020.06.033 ↗
32. Anode-Supported planar solid oxide fuel cells based on double-sided cathodes10.1002/ente.201800743 ↗
33. Performance and long-term durability of direct-methane flat-tube solid oxide fuel cells with symmetric double-sided cathodes10.1016/j.ijhydene.2019.09.126 ↗
34. Efficient and durable ammonia power generation by symmetric flat-tube solid oxide fuel cells10.1016/j.apenergy.2020.115185 ↗
35. Durability of direct internal reforming of methanol as fuel for solid oxide fuel cell with double-sided cathodes10.1016/j.ijhydene.2019.12.222 ↗
36. A quantitative analysis of influence of Ni particle size of SDC-supported anode on SOFC performance: effect of particle size of SDC support10.1016/j.ssi.2014.02.012 ↗
37. Degradation analysis and durability improvement for SOFC 1-cell stack10.1016/j.apenergy.2016.04.094 ↗
38. Trainable Weka Segmentation: a machine learning tool for microscopy pixel classification10.1093/bioinformatics/btx180 ↗
39. Ni migration of Ni-YSZ electrode in solid oxide electrolysis cell: an integrated model study10.1016/j.jpowsour.2021.230660 ↗
40. Comparative study on solid oxide fuel cell anode microstructure evolution after long-term operation10.1016/j.jpowsour.2021.229792 ↗
41. High performance anode with dendritic porous structure for low temperature solid oxide fuel cells10.1016/j.ijhydene.2018.07.171 ↗
42. Effect of various sintering inhibitors on the long term performance of Ni-YSZ anodes used for SOFCs10.1016/j.ijhydene.2015.04.145 ↗
43. Molecular dynamics simulation of Ni nanoparticles sintering process in Ni/YSZ multi-nanoparticle system10.1021/jp310920d ↗
44. Effect of nickel nano-particle sintering on methane reforming activity of Ni-CGO cermet anodes for internal steam reforming SOFCs10.1016/j.apcatb.2010.10.026 ↗
45. Theoretical study for the sintering of Ni anode in solid oxide fuel cell
46. Sintering of nickel catalysts: effects of time, atmosphere, temperature, nickel-carrier interactions, and dopants10.1016/j.apcata.2006.05.017 ↗
47. Effect of supports and Ni crystal size on carbon formation and sintering during steam methane reforming10.1016/j.apcata.2006.07.028 ↗
48. Electrical conductivity of Ni–YSZ composites: degradation due to Ni particle growth10.1016/j.ssi.2011.02.001 ↗
49. Direct, in situ optical studies of Ni-YSZ anodes in solid oxide fuel cells operating with methanol and methane10.1021/jp109292r ↗
50. In situ Raman studies of carbon removal from high temperature Ni-YSZ cermet anodes by gas phase reforming agents10.1021/jp408192e ↗
51. Influence of Ni-oxide anode thickness on performance stability in internal reforming of methane for solid oxide fuel cells10.1149/2.075306jes ↗
52. Carbon deposition on nickel cermet anodes of solid oxide fuel cells operating on carbon monoxide fuel10.1016/j.jpowsour.2012.10.018 ↗
53. Enhanced electrochemical performance and carbon deposition resistance of Ni-YSZ anode of solid oxide fuel cells by in situ formed Ni-MnO layer for CH4 on-cell reforming10.1039/C3TA12766D ↗
54. Methane decomposition and carbon growth on Y2O3, yttria-stabilized zirconia, and ZrO210.1021/cm404062r ↗
55. Enhancing coking resistance of Ni/YSZ electrodes: in situ characterization, mechanism research, and surface engineering10.1016/j.nanoen.2019.05.006 ↗
56. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
57. Raman spectroscopy characterization of amorphous coke generated in industrial processes
58. Coke formation and deactivation during catalytic reforming of biomass and waste pyrolysis products: a review10.1016/j.rser.2019.109600 ↗
59. Coking and sintering progress of a Ni supported catalyst in the steam reforming of biomass pyrolysis volatiles10.1016/j.apcatb.2018.04.002 ↗
60. Coking suppression in solid oxide fuel cells operating on ethanol by applying pyridine as fuel additive10.1016/j.jpowsour.2014.04.111 ↗
61. Ammonia-mediated suppression of coke formation in direct-methane solid oxide fuel cells with nickel-based anodes10.1016/j.jpowsour.2013.04.014 ↗
62. Comparison between internal steam and CO2 reforming of methane for Ni-YSZ and Ni-ScSZ SOFC anodes10.1149/1.3435320 ↗
63. Microchanneled anode supports of solid oxide fuel cells10.1016/j.elecom.2014.02.013 ↗
64. Performance deterioration of Ni-YSZ anode induced by electrochemically generated steam in solid oxide fuel cells10.1149/1.3336830 ↗
65. CH4 internal dry reforming over a Ni/YSZ/ScSZ anode catalyst in a SOFC: a transient kinetic study10.1016/j.catcom.2017.08.027 ↗