Ionomer-free electrocatalyst using acid-grafted carbon black as a proton-conductive support
Source abstract
Abstract
In the developments of the polymer membrane electrolyte fuel cells (PEMFCs), strategic design of their catalysts layer is a key to improve the performance and durability. Especially, interfacial structure of the electrocatalysts constructed by carbon support, platinum (Pt)-based nanoparticles and polymer electrolyte so called ionomer dominates the performance. It is known that the surface coverage of the ionomers onto the carbon-supported Pt nanoparticles generates overpotentials in the catalyst layer. To avoid this, an ionomer-free electrocatalyst is developed by functionalized surface of carbon supports, in which the support is covalently grafted to benzenesulfonic acid to facilitate the proton conduction on the carbon surface and Pt nanoparticles are attached to the acid-grafted carbon support. In single-cell measurements, although the ionomer-free electrocatalyst exhibits larger proton resistance than a conventional ionomer-based electrocatalyst, higher activity at low (<0.01 A cm −2) and high (>1.7 A cm −2) current densities were achieved owing to increased oxygen reduction reaction activity and decreased oxygen diffusion resistance, respectively. Elimination of the ionomer reduces both the interfacial overpotential as well as diffusion overpotential of the oxygen.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Materials, technological status, and fundamentals of PEM fuel cells – a review10.1016/j.mattod.2019.06.005 ↗
2. US · 2017
3. Analysis of proton exchange membrane fuel cell catalyst layers for reduction of platinum loading at Nissan10.1016/j.electacta.2011.04.058 ↗
4. Effects of cathode catalyst layer structure and properties dominating polymer electrolyte fuel cell performance10.1149/1.3624606 ↗
5. Carbon supports for low-temperature fuel cell catalysts
6. Effects of microstructure of carbon support in the catalyst layer on the performance of polymer-electrolyte fuel cells10.1149/1.1836988 ↗
7. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
8. PEMFC catalyst layers: the role of micropores and mesopores on water sorption and fuel cell activity10.1021/am200590w ↗
9. The impact of the morphology of the carbon support on the activity and stability of nanoparticle fuel cell catalysts10.1039/C6CY01679K ↗
10. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
11. Carbon support microstructure impact on high current density transport resistances in PEMFC cathode10.1149/1945-7111/ab819c ↗
12. Localization of platinum in low catalyst loading electrodes to to attain high power densities in SPE fuel cells10.1016/0022-0728(88)85190-8 ↗
13. Preparation of Pt–Ru catalysts on Nafion(Na+)-bonded carbon layer using galvanostatic pulse electrodeposition for proton-exchange membrane fuel cell10.1016/j.jpowsour.2008.10.135 ↗
14. Preparation of low Pt loading electrodes on Nafion (Na+)-bonded carbon layer with galvanostatic pulses for PEMFC application10.1016/j.jpowsour.2006.09.018 ↗
15. High-performance nanostructured membrane electrode assemblies for fuel cells made by layer-by-layer assembly of carbon nanocolloids10.1002/adma.200701219 ↗
16. Preparation procedure for the electrode slurries of polymer electrolyte fuel cells utilizing the irreversibility of ionomer adsorption onto Pt–C particles10.2109/jcersj2.19152 ↗
17. Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum cobalt/high surface area carbon based polymer electrolyte fuel cells10.1016/j.jpowsour.2020.228889 ↗
18. Solvent effect on the Nafion agglomerate morphology in the catalyst layer of the proton exchange membrane fuel cells10.1016/j.ijhydene.2016.12.015 ↗
19. Tuning the ionomer distribution in the fuel cell catalyst layer with scaling the ionomer aggregate size in dispersion10.1021/acsami.8b01751 ↗
20. Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC10.1149/2.1251814jes ↗
21. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
22. Probing ionomer interactions with electrocatalyst particles in solution10.1021/acsenergylett.1c00866 ↗
23. Dependence of optimum Nafion content in catalyst layer on platinum loading10.1016/j.jpowsour.2003.12.060 ↗
24. The effects of Nafion® ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method10.1016/j.ijhydene.2009.11.058 ↗
25. Ionomer content in the catalyst layer of polymer electrolyte membrane fuel cell (PEMFC): effects on diffusion and performance
26. Study of the influence of the amount of PBI-H3PO4 in the catalytic layer of a high temperature PEMFC10.1016/j.ijhydene.2009.11.091 ↗
27. The controllable design of catalyst inks to enhance PEMFC performance: a review10.1007/s41918-020-00083-2 ↗
28. Effect of adsorption of sulfate anions on the activities for oxygen reduction reaction on Nafion®-coated Pt/carbon black catalysts at practical temperatures10.1016/j.jelechem.2015.04.007 ↗
29. Catalyst poisoning property of sulfonimide acid ionomer on Pt (111) surface10.1149/2.051405jes ↗
30. Influence of Nafion® film on oxygen reduction reaction and hydrogen peroxide formation on Pt electrode for proton exchange membrane fuel cell10.1016/j.electacta.2010.08.005 ↗
31. Increase in adsorptivity of sulfonate anions on Pt (111) surface with drying of ionomer10.1016/j.elecom.2013.09.005 ↗
32. Oxygen reduction reaction at three-phase interfaces10.1002/cphc.201000190 ↗
33. Molecular dynamics simulations on O2 permeation through nafion ionomer on platinum surface10.1016/j.electacta.2015.12.031 ↗
34. Operando X-ray absorption spectroscopic study on the influence of specific adsorption of the sulfo group in the perfluorosulfonic acid ionomer on the oxygen reduction reaction activity of the Pt/C catalyst10.1021/acsaem.0c02326 ↗
35. Effect of the side-chain structure of perfluoro-sulfonic acid ionomers on the oxygen reduction reaction on the surface of Pt10.1021/acscatal.7b03571 ↗
36. Review of characterization and modeling of polymer electrolyte fuel cell catalyst layer: the blessing and curse of ionomer10.1007/s11708-017-0490-6 ↗
37. Suppression of oxygen reduction reaction activity on Pt-based electrocatalysts from ionomer incorporation10.1016/j.jpowsour.2016.06.062 ↗
38. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
39. Sputtered cathodes for polymer electrolyte fuel cells: insights into potentials, challenges and limitations10.2533/chimia.2012.110 ↗
40. Sulfated-zirconia as a support of Pt catalyst for polymer electrolyte fuel cells10.1149/1.2730625 ↗
41. Noncarbon support materials for polymer electrolyte membrane fuel cell electrocatalysts10.1021/cr100060r ↗
42. The effect of carbon support surface functionalization on PEM fuel cell performance, durability, and ionomer coverage in the catalyst layer10.1149/1945-7111/ab7ea3 ↗
43. Enhanced MEA performance for PEMFCs under low relative humidity and low oxygen content conditions via catalyst functionalization10.1149/2.0051707jes ↗
44. Enhanced Pt/C catalyst stability using p-benzensulfonic acid functionalized carbon blacks as catalyst supports10.1016/j.electacta.2013.01.097 ↗
45. Theoretical examination of effective oxygen diffusion coefficient and electrical conductivity of polymer electrolyte fuel cell porous components10.1016/j.jpowsour.2016.07.107 ↗
46. Aryl diazo compounds and diazonium salts as potential irreversible probes of the GABA receptor10.1021/jm00395a008 ↗
47. Effect of a polybenzimidazole coating on carbon supports for ionomer content optimization in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.229855 ↗
48. PEMFC cathode catalyst contamination evaluation with a RRDE-Acetonitrile10.1016/j.electacta.2014.04.149 ↗
49. Comparison of high surface Pt/C catalysts by cyclic voltammetry10.1016/S0378-7753(01)00921-1 ↗
50. Analytical procedure for accurate comparison of rotating disk electrode results for the oxygen reduction activity of Pt/C10.1149/2.036405jes ↗
51. Functionalization of nanomaterials with aryldiazonium salts10.1016/j.cis.2015.07.011 ↗
52. Surface functionalization and pore size manipulation for carbons of ordered structure10.1021/cm047954z ↗
53. The relationship between inherent properties of carbon nanotubes and electrochemical durability of supported-Pt catalysts, Diamond Relat
54. Preparation of Pt/mesoporous carbon (MC) electrode catalyst and its reactivity toward oxygen reduction10.1016/j.electacta.2008.01.110 ↗
55. Design of an assembly of poly(benzimidazole), carbon nanotubes, and Pt nanoparticles for a fuel-cell electrocatalyst with an ideal interfacial nanostructure10.1002/smll.200801742 ↗
56. Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells10.1038/s41563-019-0487-0 ↗
57. Recent advances in electrocatalysts for oxygen reduction reaction10.1021/acs.chemrev.5b00462 ↗
58. Oxygen reduction reaction measurements on platinum electrocatalysts utilizing rotating disk electrode technique10.1149/2.0551512jes ↗
59. Oxygen reduction reaction measurements on platinum electrocatalysts utilizing rotating disk electrode technique10.1149/2.1071509jes ↗
60. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
61. Determination of proton conductivity in anode catalyst layers of the direct methanol fuel cell (DMFC)10.1016/j.jelechem.2003.12.047 ↗
62. Factors influencing electrochemical properties and performance of hydrocarbon-based electrolyte PEMFC catalyst layers10.1149/1.3082119 ↗
63. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
64. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
65. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
66. Understanding formation mechanism of heterogeneous porous structure of catalyst layer in polymer electrolyte fuel cell10.1016/j.ijhydene.2016.08.029 ↗
67. Development of novel three-dimensional reconstruction method for porous media for polymer electrolyte fuel cells using focused ion beam-scanning electron microscope tomography10.1016/j.jpowsour.2017.02.050 ↗
68. Effect of porous structure of catalyst layer on effective oxygen diffusion coefficient in polymer electrolyte fuel cell10.1016/j.jpowsour.2016.07.037 ↗