journal article·2022-01

Numerical simulation of methanol crossover in flowing electrolyte-direct methanol fuel cell

Wu Yujing, Zhou Hongxiu, Zhang Ao, Zhao Leqing

Publisher page

Abstract

Abstract A two-dimensional, comprehensive model for flowing electrode direct methanol fuel cell (FEDMFC) is developed to investigate cell performance and prevention of methanol crossover. Governing equations consists of the electron and proton transfer equations, mass and momentum conservation equation, energy transfer equations, species transfer of gas and liquid equations, dissolved water equations, as well as modified Tafel equations. The influence of operating parameters (such as flow rate and inlet temperature) and porous properties (such as porosity and permeability) of flowing electrode channel (FEC) on cell performance and methanol crossover are discussed in details. The results show that FEDMFC effectively reduces the methanol crossover rate with no significant reduction of power densities compared with direct methanol fuel cell (DMFC) under the same conditions. The Increase of the FEC flow rate can further reduce the methanol crossover rate. However, a higher flow rate will lead to a decrease in cell efficiency and stability. The FEC flow rate controlled at 1-3 sccm is more appropriate. Additionally, the lower inlet temperature of FEC is associated with lower methanol crossover rate and better cooling effect. The lower porosity is more conducive to reducing the effective diffusion coefficient of methanol, thus decreasing the methanol crossover rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Fuel cells for portable applications10.1016/S0378-7753(01)01069-2 ↗
2. Mass transport phenomena in direct methanol fuel cells10.1016/j.pecs.2009.01.001 ↗
3. Liu · 2006
4. Direct methanol–air fuel cells with membranes plus circulating electrolyte10.1016/S0378-7753(01)00491-8 ↗
5. A parametric study of methanol crossover in a flowing electrolyte-direct methanol fuel cell10.1016/j.jpowsour.2005.03.181 ↗
6. 1D modeling of a flowing electrolyte-direct methanol fuel cell10.1016/j.jpowsour.2010.12.013 ↗
7. 2D modeling of a flowing-electrolyte direct methanol fuel cell10.1016/j.jpowsour.2012.03.001 ↗
8. Kablou · 2012
9. Performance measurements of a single cell flowing electrolyte-direct methanol fuel cell (FE-DMFC)10.1016/j.jpowsour.2012.11.147 ↗
10. Effect of cathode flow field configuration on the performance of flowing electrolyte-direct methanol fuel cell
11. Mathematical modelling of the influence of ultra‐micro electrode geometry on approach curves registered by scanning electrochemical microscopy10.1002/elan.201900313 ↗
12. Modelling of scanning electrochemical microscopy at redox competition mode using diffusion and reaction equations10.1016/j.electacta.2016.10.179 ↗
13. Modeling of high-efficient direct methanol fuel cells with order-structured catalyst layer10.1016/j.apenergy.2019.113431 ↗
14. A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell
15. A two-dimensional, two-phase mass transport model for liquid-feed DMFCs10.1016/j.electacta.2007.03.069 ↗
16. Investigation of the effect of CO2 bubbles and slugs on the performance of a DMFC by means of laser-optical flow measurements10.1016/j.egypro.2012.08.043 ↗
17. Yan · 2016
18. In situ visualization study of CO2 gas bubble behavior in DMFC anode flow fields10.1016/j.jpowsour.2004.05.033 ↗
19. Numerical simulations of anode two-phase flow in Micro-DMFC using the volume of fluid method10.1016/j.ijhydene.2016.05.264 ↗
20. Two‐phase flow modeling of direct methanol fuel cell anode compartment10.1002/fuce.201900021 ↗
21. Bubble behaviors in direct methanol fuel cell anode with parallel design10.1016/j.ijhydene.2017.06.149 ↗
22. CO2 bubble behaviors and two-phase flow characteristics in single-serpentine sinusoidal corrugated channels of direct methanol fuel cell10.1016/j.jpowsour.2019.227621 ↗
23. Three-dimensional two-phase mass transport model for direct methanol fuel cells10.1016/j.electacta.2007.07.070 ↗
24. Mathematical modeling of liquid-feed direct methanol fuel cells10.1149/1.1559061 ↗
25. A single domain approach to modeling the multiphase flow within a flowing electrolyte – direct methanol fuel cell10.1016/j.ijhydene.2014.11.103 ↗
26. Two-dimensional multiphase non-isothermal modeling of a flowing electrolyte - direct methanol fuel cell10.1016/j.ijhydene.2016.06.214 ↗
27. A two-dimensional two-phase mass transport model for direct methanol fuel cells adopting a modified agglomerate approach10.1016/j.jpowsour.2008.06.007 ↗
28. One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes
29. Two-phase flow regimes in narrow rectangular vertical and horizontal channels10.1016/0017-9310(94)90064-7 ↗
30. Absorption, desorption, and transport of water in polymer electrolyte membranes for fuel cells10.1149/1.1899263 ↗
31. Numerical optimization study of the catalyst layer of PEM fuel cell cathode10.1016/j.jpowsour.2003.08.043 ↗
32. Water transport characteristics in a passive liquid-feed DMFC
33. Analysis of mass transport of methanol at the anode of a direct methanol fuel cell10.1149/1.2201467 ↗
34. A three-dimensional mathematical model for liquid-fed direct methanol fuel cells10.1016/j.jpowsour.2006.02.001 ↗
35. Modeling and simulation of a direct methanol fuel cell anode10.1016/S0378-7753(02)00399-3 ↗
36. Three dimensional modeling of a FE-DMFC short-stack10.1016/j.ijhydene.2017.11.123 ↗
37. Deryn, Comparative studies of methanol crossover and cell performance for a DMFC10.1149/1.1629093 ↗
38. Hao · 2014
39. Quantification of in situ temperature measurements on a PBI-based high temperature PEMFC unit cell10.1016/j.ijhydene.2009.10.002 ↗
40. Matching of water and temperature fields in proton exchange membrane fuel cells with non-uniform distributions10.1016/j.ijhydene.2011.07.014 ↗
41. Numerical investigations of the combined effects of flow rate and methanol concentration on DMFC performance10.3390/en10081094 ↗
42. Modeling of the anode of a liquid-feed DMFC: inhomogeneous compression effects and two-phase transport phenomena10.1016/j.jpowsour.2013.06.166 ↗
43. Jiao · 2011
44. A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations10.1016/j.jpowsour.2007.03.012 ↗
45. Effect of electrode variable contact angle on the performance and transport characteristics of passive direct methanol fuel cells10.1016/j.ijhydene.2015.06.085 ↗
46. A three-dimensional multi-phase numerical model of DMFC utilizing Eulerian-Eulerian model10.1016/j.applthermaleng.2017.12.037 ↗
47. Coupled thermal and water management in polymer electrolyte fuel cells10.1149/1.2352039 ↗