Large-area surface-patterned Li metal anodes fabricated using large, flexible patterning stamps for Li metal secondary batteries
Source abstract
Abstract
Abstract The use of surface-patterned lithium (Li) metal has been proposed as a promising strategy for inhibiting the formation of Li dendrites during repeated Li plating/stripping processes. Nevertheless, the conventional Li metal patterning process is complex, expensive, incompatible with mass production, and incapable of producing finely controlled patterns on the Li metal surface. A large, flexible patterning stamp capable of large-area patterns is developed using a silicon (Si) wafer-based chemical etching process, and its effect on the electrochemical performance of a Li metal anode is investigated. The newly developed stamps have 5,000% larger patterning area compared to the conventional stainless-steel stamps. Furthermore, when compared to conventional surface-patterned Li metal fabricated with conventional stainless-steel stamps (SP-LM), the surface-patterned Li metal fabricated with large and flexible patterning stamps (LAP-LM) demonstrates improved electrochemical performance and stable morphological properties. As a result, the LAP-LM is able to retain up to 85.2% of its initial discharge capacity (85.9 mAh g−1) after 200 cycles at 3C (3.96 mA cm−2), while the SP-LM shows a severe capacity decay after 150 cycles (94.0 mAh g−1 and 13.0 mAh g−1 at the 150th cycle and 200th cycle, respectively).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Insertion electrode materials for rechargeable lithium batteries10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
2. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
3. Battery energy storage technology for power systems—an overview, Electr10.1016/j.epsr.2008.09.017 ↗
4. Lithium‐metal foil surface modification: an effective method to improve the cycling performance of lithium‐metal batteries10.1002/admi.201700166 ↗
5. Health and environmental benefits related to electric vehicle introduction in EU countries10.1016/j.trd.2014.09.002 ↗
6. Chemical reaction of lithium surface during immersion in LiClO4 or LiPF6/DEC electrolyte10.1149/1.1837718 ↗
7. Review on high-loading and high-energy lithium-sulfur batteries10.1002/aenm.201700260 ↗
8. Liquid electrolyte lithium/sulfur battery: fundamental chemistry, problems, and solutions10.1016/j.jpowsour.2012.12.102 ↗
9. Lithium−air battery: promise and challenges10.1021/jz1005384 ↗
10. The lithium/air battery: still an emerging system or a practical reality?10.1002/adma.201403064 ↗
11. An improved high-performance lithium-air battery10.1038/nchem.1376 ↗
12. Structure‐controlled Li metal electrodes for post‐Li‐ion batteries: recent progress and perspectives10.1002/admi.201902113 ↗
13. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
14. Micro‐patterned lithium metal anodes with suppressed dendrite formation for post lithium‐ion batteries10.1002/admi.201600140 ↗
15. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
16. Glassy Li metal anode for high-performance rechargeable Li batteries10.1038/s41563-020-0729-1 ↗
17. A review of solid electrolyte interphases on lithium metal anode10.1002/advs.201500213 ↗
18. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
19. Mechanical surface modification of lithium metal: towards improved Li metal anode performance by directed Li plating10.1002/adfm.201402953 ↗
20. Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes10.1039/C7TA00371D ↗
21. Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte10.1038/s41560-019-0428-9 ↗
22. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries10.1038/nenergy.2017.12 ↗
23. Anode-free rechargeable lithium metal batteries10.1002/adfm.201602353 ↗
24. The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth10.1038/ncomms8436 ↗
25. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries10.1002/adfm.201605989 ↗
26. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism10.1021/ja312241y ↗
27. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
28. A simple composite protective layer coating that enhances the cycling stability of lithium metal batteries10.1016/j.jpowsour.2015.03.004 ↗
29. Ultrafine silver nanoparticles for seeded lithium deposition toward stable lithium metal anode10.1002/adma.201702714 ↗
30. Micro-patterned lithium metal anodes with suppressed dendrite formation for post lithium-ion batteries10.1002/admi.201600140 ↗
31. Composite protection layers for dendrite-suppressing non-granular micro-patterned lithium metal anodes10.1016/j.electacta.2018.05.102 ↗
32. Guided lithium deposition by surface micro‐patterning of lithium‐metal electrodes10.1002/celc.201800694 ↗
33. Size effects of micro-pattern on lithium metal surface on the electrochemical performance of lithium metal secondary batteries10.1016/j.jpowsour.2018.09.061 ↗
34. Suppression of dendrites and granules in surface-patterned Li metal anodes using CsPF610.1016/j.jpowsour.2018.12.052 ↗
35. High-rate cycling of lithium-metal batteries enabled by dual-salt electrolyte-assisted micropatterned interfaces10.1021/acsami.9b05492 ↗
36. Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature10.1016/j.jpowsour.2012.04.103 ↗
37. Particle size-dependent, tunable porous structure of a SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated poly(ethylene terephthalate) nonwoven composite separator for a lithium-ion battery10.1039/c1jm12246k ↗