journal article·2021-10

Clarification of particle size dependence on the rate capabilities of Li[Ni1/2Mn3/2]O4 materials and electrodes by the dilute electrode method

Kingo Ariyoshi, Jun Sugawa, Shumpei Masuda

Publisher page

Abstract

Abstract Improving the rate capability of lithium insertion electrodes is essential for high-power lithium-ion batteries used in automobile applications. Several approaches have been studied to improve the rate capability of Li[Ni1/2Mn3/2]O4 (LiNiMO); however, no consensus has been reached owing to conflicting results of particle size dependence on rate capability. Rate capability improvement has been obtained previously using nanosized particles as well as micron-sized particles. To solve this contradiction, we examined the dependence of particle size on rate capabilities of LiNiMO materials and electrodes using the dilurted electrode method. This method allows us to measure two distinct rate capabilities of lithium insertion materials and electrodes. The rate capability of dilute-LiNiMO electrodes is improved by using nanosized particles, while that of conventional electrodes is improved by using micron-sized particles. This indicates two different rate-determining steps: Li-ion transport in LiNiMO particles for the dilute electrodes, and Li-ion diffusion in the electrolyte for the conventional LiNiMO electrodes. Moreover, the rate capability of the dilute-LiNiMO electrodes is superior to that of the conventional electrodes, indicating that Li-ion transport in LiNiMO particles is faster than Li-ion diffusion in an electrolyte with porous electrodes. These findings provide important insights for designing electrodes with excellent rate capabilities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Why do batteries fail?10.1126/science.1253292 ↗
3. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
4. Lithium-ion batteries with high rate capabilities10.1021/acssuschemeng.7b00046 ↗
5. Battery materials design essentials10.1021/accountsmr.1c00026 ↗
6. Ionic conduction in lithium ion battery composite electrode governs cross-sectional reaction distribution10.1038/srep26382 ↗
7. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
8. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
9. Nano active materials for lithium-ion batteries10.1039/c0nr00068j ↗
10. Nanowires for electrochemical energy storage10.1021/acs.chemrev.9b00326 ↗
11. A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes10.1016/j.electacta.2012.03.161 ↗
12. Revealing the rate-limiting Li-ion diffusion pathway in ultrathick electrodes for Li-ion batteries10.1021/acs.jpclett.8b02229 ↗
13. Semi-empirical master curve concept describing the rate capability of lithium insertion electrodes10.1016/j.jpowsour.2018.01.077 ↗
14. Understanding thickness and porosity effects on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2-based cathodes for high energy Li-ion batteries10.1016/j.jpowsour.2019.02.060 ↗
15. Quantifying the factors limiting rate performance in battery electrodes10.1038/s41467-019-09792-9 ↗
16. Operando observation of formation and annihilation of inhomogeneous reaction distribution in a composite electrode for lithium-ion batteries10.1002/batt.201900018 ↗
17. Mapping and metastability of heterogeneity in LiMn2O4 battery electrodes with high energy density10.1149/1945-7111/ab6298 ↗
18. Diffusion-limited C-rate: a Fundamental principle quantifying the intrinsic limits of Li-ion batteries10.1002/aenm.201902523 ↗
19. Simulation study of rate limiting factors of Li-ion batteries using experimental functions of electronic and ionic resistances10.1016/j.electacta.2021.137834 ↗
20. High rate discharge capability of single particle electrode of LiCoO210.1016/j.jpowsour.2008.07.081 ↗
21. Evaluation of real performance of LiFePO4 by using single particle technique10.1016/j.jpowsour.2012.06.037 ↗
22. Intrinsic electrochemical characteristics of one LiNi0.5Mn1.5O4 spinel particle10.1016/j.jelechem.2017.06.042 ↗
23. Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries10.1039/C8EE00001H ↗
24. Li+ insertion/extraction properties for TiNb2O7 single particle characterized by a particle-current collector integrated microelectrode10.1149/2.0241903jes ↗
25. Analysis of intrinsic properties of Li4Ti5O12 using single-particle technique10.1016/j.jelechem.2019.113514 ↗
26. Electrochemical single-particle measurements of electrode materials for Li-ion batteries: possibilities, insights and implications for future development10.1016/j.electacta.2019.135160 ↗
27. Thin-film lithium and lithium-ion batteries10.1016/S0167-2738(00)00327-1 ↗
28. Analysis of thin-film lithium batteries with cathodes of 50 nm to 4 μm thick LiCoO2
29. Li insertion into Li4Ti5O12 (spinel); Charge capability vs. particle size in thin-film electrodes10.1149/1.1581262 ↗
30. Electrochemical properties of nonstoichiometric LiNi0.5Mn1.5O4−δ thin-film electrodes prepared by pulsed laser deposition10.1149/1.2741157 ↗
31. Lithium diffusion in sputter-deposited Li4Ti5O12 thin films10.1016/j.jpowsour.2012.04.102 ↗
32. Synthesis of LiCoO2 epitaxial thin films using a sol-gel method10.1016/j.jpowsour.2014.10.070 ↗
33. A clue to high rate capability of lithium-ion batteries obtained by an electrochemical approach using “diluted” electrode10.1149/2.0861816jes ↗
34. Differentiating the rate capabilities of lithium-nickel-manganese oxide Li[Ni1/2Mn3/2]O4 insertion materials and electrodes using diluted electrode methods10.1149/1945-7111/abc10a ↗
35. Determination of solid-state Li diffusion coefficient of lithium insertion materials from rate capability tests on diluted electrode10.5796/electrochemistry.20-00136 ↗
36. Electrochemical impedance analysis of Li[Li0.1Al0.1Mn1.8]O4 used as lithium-insertion electrodes by the diluted electrode method10.1016/j.jpowsour.2019.226810 ↗
37. Impact of particle size of lithium manganese oxide on charge transfer resistance and contact resistance evaluated by electrochemical impedance analysis10.1016/j.electacta.2020.137292 ↗
38. Three-volt lithium-ion battery consisting of Li[Ni1/2Mn3/2]O4 and Li[Li1/3Ti5/3]O4: improvement of positive-electrode material for long-life medium-power applications10.5796/electrochemistry.76.46 ↗
39. Effect of primary particle size upon polarization and cycling stability of 5-V lithium insertion material of Li[Ni1/2Mn3/2]O410.1149/1.3531965 ↗
40. Nano-LiNi0.5Mn1.5O4 spinel: a high power electrode for Li-ion batteries10.1039/b806662k ↗
41. The effect of particle size and morphology on the rate capability of 4.7V LiMn1.5+δNi0.5−δO4 spinel lithium-ion battery cathodes10.1016/j.electacta.2007.12.057 ↗
42. LiNi0.5Mn1.5O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries10.1021/nl401072x ↗
43. Morphological evolution of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries: the critical effects of surface orientations and particle size
44. Comparison of the performance of LiNi1/2Mn3/2O4 with different microstructures10.1149/1.3606570 ↗
45. Electrochemical studies of spinel LiNi0.5Mn1.5O4 cathodes with different particle morphologies10.1016/j.electacta.2011.12.129 ↗
46. Hydrothermal synthesis of LiNi0.5Mn1.5O4 sphere and its performance as high-voltage cathode material for lithium ion batteries10.1016/j.ceramint.2015.11.031 ↗
47. Examining the long-term cyclabilities of Li[Ni1/2Mn3/2]O4 and Li[Li0.1Al0.1Mn1.8]O4 using a full-cell configuration including LTO-counter electrodes with extra capacity10.1149/1945-7111/ab872f ↗
48. Topotactic two-phase reactions of Li[Ni1/2Mn3/2]O4 (P4332) in nonaqueous lithium cells10.1149/1.1639162 ↗
49. Comparative study of LiNi0.5Mn1.5O4-δ and LiNi0.5Mn1.5O4 cathodes having two crystallographic structures: Fd3m and P433210.1021/cm035050s ↗
50. Synthesis and characterization of nanostructured 4.7 V LixMn1.5Ni0.5O4 spinels for high-power lithium-ion batteries10.1149/1.2198110 ↗
51. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
52. Delithiation/lithiation behavior of LiNi0.5Mn1.5O4 studied by in situ and ex situ 6,7Li NMR spectroscopy10.1021/acs.jpcc.5b03273 ↗
53. In situ synchrotron study of ordered and disordered LiMn1.5Ni0.5O4 as lithium ion battery positive electrode10.1016/j.actamat.2016.06.040 ↗
54. Phase transition kinetics of LiNi0.5Mn1.5O4 analyzed by temperature-controlled operando X-ray absorption spectroscopy10.1039/C5CP05535K ↗
55. Phase transformation mechanism in lithium manganese nickel oxide revealed by single-crystal hard X-ray microscopy10.1038/ncomms14309 ↗
56. Lithium-ion transfer at the interface between lithium-ion conductive ceramic electrolyte and liquid electrolyte-A key to enhancing the rate capability of lithium-ion batteries10.1149/1.2042907 ↗
57. Solvated Li-ion transfer at interface between graphite and electrolyte10.1149/1.1763141 ↗
58. Diagnostics of lithium-ion intercalation rate-determining step: distinguishing between slow desolvation and slow charge transfer10.1016/j.electacta.2019.02.043 ↗
59. Surface chemistry of metal oxide coated lithium manganese nickel oxide thin film cathodes studied by XPS10.1016/j.electacta.2012.11.120 ↗
60. A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries10.1039/c3ee42981d ↗
61. Ti surface doping of LiNi0.5Mn1.5O4−δ positive electrodes for lithium ion batteries10.1039/C7RA12932G ↗
62. Charge-transfer kinetics of the solid-electrolyte interphase on Li4Ti5O12 thin-film electrodes10.1002/cssc.202001086 ↗
63. Quantitative analysis of solid electrolyte interphase and its correlation with the electrochemical performance of lithium ion batteries using concentrated LiPF6/propylene carbonate