Kinetics analysis of the electro-catalyzed degradation of high potential LiNi0,5Mn1,5O4 active materials
Source abstract
Abstract
Abstract One approach to increase the energy density of Li-ion batteries is to use high potential cathode material like LiNi0·5Mn1·5O4 (LNMO). However, it suffers from low coulombic efficiency, self-discharge and poor cyclability in carbonates-based electrolytes. Many mechanisms to explain degradation such as HF generation, surface catalytic activity and transition metals dissolution have been suggested to explain these behaviors. By comparison with a non-fluorinated environment, we demonstrated that hydrofluoric acid is not the main reason of capacity loss. A comparison of electrolyte degradation on model thin-film and composite electrodes proved that electrolyte oxidation is catalyzed on the active material surface of LNMO and not on the carbon. A Tafel like behavior of the electrolyte oxidation was obtained thanks to the measure of the steady state current at different potentials. The low coulombic efficiency is essentially related to the self-discharge mechanism. Finally, the capacity fading has been quantitatively correlated to the electrolyte oxidation: at 25 °C, about 4% of oxidized electrolyte molecules leads to the degradation of the material, probably due to the dissolution of surface transition metal. By lowering the operating temperature, the electrolyte degradation kinetics decreased, leading proportionally to better cycling stability. Perspectives of this work are also drawn.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. “From solid‐solution electrodes and the rocking‐chair concept to today’s batteries10.1002/anie.201913923 ↗
2. Higher, stronger, better… A review of 5 volt cathode materials for advanced lithium‐ion batteries10.1002/aenm.201200068 ↗
3. Recent progress in cathode materials research for advanced lithium ion batteries
4. Synthesis and electrochemistry of LiNixMn2-xO410.1149/1.1837386 ↗
5. In situ XAFS analysis of Li(Mn,M)2O4 (M= Cr, Co, Ni) 5V cathode materials for lithium-ion secondary batteries10.1006/jssc.2000.8990 ↗
6. Effects of Al substitution for Ni and Mn on the electrochemical properties of LiNi0. 5Mn1. 5O410.1016/j.electacta.2011.03.093 ↗
7. Complementary strategies toward the aqueous processing of high‐voltage LiNi0.5Mn1.5O4 lithium‐ion cathodes10.1002/cssc.201702021 ↗
8. Barbosa · 2019
9. Synthesis and characterization of nanostructured 4.7 V LixMn1.5Ni0.5O4 spinels for high-power lithium-ion batteries10.1149/1.2198110 ↗
10. Spinel LiNi0.5Mn1.5O4 cathode for rechargeable lithiu mion batteries: nano vs micro, ordered phase (P4332) vs disordered phase (Fd3m)10.1007/s12274-013-0343-5 ↗
11. Origin of the Ni/Mn ordering in high-voltage spinel LiNi0.5Mn1.5O4: the role of oxygen vacancies and cation doping10.1016/j.commatsci.2016.01.005 ↗
12. Structure and insertion properties of disordered and ordered LiNi0.5Mn1.5O4 spinels prepared by wet chemistry10.1007/s11581-006-0021-7 ↗
13. Fabrication of densely packed LiNi0.5Mn1.5O4 cathode material with excellent long-term cycleability for high-voltage lithium ion batteries10.1016/j.jpowsour.2015.11.021 ↗
14. Electrochemical and electronic charge transport properties of Ni-doped LiMn2O4 spinel obtained from polyol-mediated synthesis10.3390/ma11050806 ↗
15. Beneficial influence of succinic anhydride as electrolyte additive on the self-discharge of 5 V LiNi0.4Mn1.6O4 cathodes10.1016/j.jpowsour.2013.02.030 ↗
16. Understanding transition-metal dissolution behavior in LiNi0.5Mn1.5O4 high-voltage spinel for lithium ion batteries10.1021/jp405158m ↗
17. Polyhedral LiNi0.5Mn1.5O4 with excellent electrochemical properties for lithium-ion batteries10.1039/C4TA02371D ↗
18. Effect of added LiBOB on high voltage (LiNi0.5Mn1.5O4) spinel cathodes
19. Lithium malonatoborate additives enabled stable cycling of 5 V lithium metal and lithium ion batteries10.1016/j.nanoen.2017.07.051 ↗
20. Surface chemistry of LiNi0.5Mn1.5O4 particles coated by Al2O3 using atomic layer deposition for lithium-ion batteries10.1016/j.jpowsour.2014.10.207 ↗
21. Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries10.1016/j.jpowsour.2016.03.070 ↗
22. Preparation and characterization of spinel LiNi0.5-xMgxMn1.5O4 cathode materials via spray pyrolysis method10.1016/j.jpowsour.2013.04.083 ↗
23. Understanding the improved electrochemical performances of Fe-substituted 5 V spinel cathode LiMn1.5Ni0.5O410.1021/jp904276t ↗
24. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
25. Crystal surface and state of charge dependencies of electrolyte decomposition on LiMn2O4 cathode10.1149/2.009408jes ↗
26. the formation mechanism of fluorescent metal complexes at the LixNi0.5Mn1.5O4-δ/Carbonate ester electrolyte interface10.1021/ja5116698 ↗
27. Effects of solvent, lithium salt, and temperature on stability of carbonate-based electrolytes for 5.0 V LiNi0.5Mn1.5O4 electrodes10.1149/2.0201602jes ↗
28. Capacity fading reason of LiNi0.5Mn1.5O4 with commercial electrolyte10.1007/s11581-012-0835-4 ↗
29. Failure mechanisms of LiNi0.5Mn1.5O4 electrode at elevated temperature10.1016/j.jpowsour.2012.04.103 ↗
30. Crystallographic origin of cycle decay of the high-voltage LiNi0.5Mn1.5O4 spinel lithium-ion battery electrode10.1039/C6CP00947F ↗
31. Surface and interface issues in spinel LiNi0.5Mn1.5O4: insights into a potential cathode material for high energy density lithium ion batteries10.1021/acs.chemmater.6b00948 ↗
32. New insights into a high potential spinel and alkylcarbonate-based electrolytes10.1016/j.electacta.2012.11.028 ↗
33. Mohamedi · 2002 · 79
34. LiNi0.5Mn1.5O4 thin-film cathodes on gold-coated stainless steel substrates: formation of interlayers and electrochemical properties10.1016/j.electacta.2014.03.184 ↗
35. Comparative study of LiNi0.5Mn1.5O4–δ and LiNi0.5Mn1.5O4 cathodes having two crystallographic structures: Fd3m and P433210.1021/cm035050s ↗
36. In situ Raman spectroscopic studies of LiNixMn2-xO4 thin film cathode materials for lithium ion secondary batteries10.1039/B206764A ↗
37. Versatile approach combining theoretical and experimental aspects of Raman spectroscopy to investigate battery materials: the case of the LiNi0. 5Mn1. 5O4 spinel10.1021/acs.jpcc.6b04155 ↗
38. Brunauer · 1938 · 309
39. Capacity fade model for spinel LiMn2O4 electrode10.1149/2.026302jes ↗
40. Electrolyte reactions with the surface of high voltage LiNi0.5Mn1.5O4 cathodes for lithium-ion batteries10.1149/1.3428515 ↗
41. Graphene-oxide-coated LiNi0.5Mn1.5O4 as high voltage cathode for lithium ion batteries with high energy density and long cycle life10.1039/c3ta01534c ↗
42. Direct carbon coating at high temperature on LiNi0.5Mn1.5O4 cathode: unexpected influence on crystal structure and electrochemical performances10.1016/j.jpowsour.2015.04.137 ↗
43. Influence of surface modification on electrochemical performance of high voltage spinel ordered-LiNi0.5Mn1.5O4 exposed to 5.3 V for 100h before and after surface modification with ALD method10.1016/j.electacta.2015.10.041 ↗
44. Novel AlF3 surface modified spinel LiMn1. 5Ni0. 5O4 for lithium-ion batteries: performance characterization and mechanism exploration10.1016/j.electacta.2015.01.145 ↗
45. The study of the anodic stability of alkyl carbonate solutions by in situ FTIR spectroscopy10.1016/S0022-0728(00)00457-5 ↗
46. High‐Voltage LiNi0.45Cr0.1Mn1.45O4 cathode with superlong cycle performance for wide temperature lithium‐ion batteries10.1002/adfm.201704808 ↗
47. High precision coulometry studies of single-phase layered compositions in the Li-Mn-Ni-O system10.1149/2.112406jes ↗
48. Comparing the behavior of nano-and microsized particles of LiMn1. 5Ni0.5O4 spinel as cathode materials for Li-ion batteries10.1149/1.2736657 ↗
49. A facile method to prepare hybrid LiNi0.5Mn1.5O4/C with enhanced rate performance10.1016/j.jallcom.2010.12.188 ↗
50. Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries10.1016/j.electacta.2010.12.109 ↗