journal article·2020-06

Influence of structure size on voltage uniformity of flat tubular segmented-in-series solid oxide fuel cell

Daan Cui, Yulong Ji, Chao Chang, Zhe Wang, Xiu Xiao, Yantao Li

Publisher page

Abstract

Abstract In the present work, a two-dimensional model is used to evaluate the voltage distribution of a flat tube segmented-in-series solid oxide fuel cell (FTS-SOFC) including a fuel channel, an anode, a cathode and an electrolyte layer. The results indicate that when the other cell dimensions are fixed, the anode length of 5 mm gives the highest maximum power density for the FTS-SOFC. By changing the anode length of single cell of FTS-SOFC, the voltage uniformity can be significantly improved, which avoids the low voltage of single cell in the downstream, and provides effective design suggestions for the development and industrialization of FTS-SOFC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Dynamic model of a micro-tubular solid oxide fuel cell stack including an integrated cooling system10.1016/j.jpowsour.2016.11.070 ↗
2. Fabrication of micro-tubular solid oxide fuel cells using sulfur-free polymer binder via a phase inversion method10.1016/j.jpowsour.2015.04.057 ↗
3. Transient simulation of a tubular micro-solid oxide fuel cell10.1016/j.jpowsour.2018.10.062 ↗
4. Performance and long-term durability of direct-methane flat-tube solid oxide fuel cells with symmetric double-sided cathodes10.1016/j.ijhydene.2019.09.126 ↗
5. Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modeling10.1016/j.jpowsour.2007.08.094 ↗
6. Design for segmented-in-series solid oxide fuel cell through mathematical modeling10.1016/j.jpowsour.2009.09.020 ↗
7. Fabrication and performance evaluation of six-cell two-dimensional configuration solid oxide fuel cell stack based on planar 6 x 6 cm anode-supported cells10.3390/en12183541 ↗
8. A numerical analysis of heat and mass transfer processes in a macro-patterned methane/steam reforming reactor10.1016/j.ijhydene.2018.09.058 ↗
9. Molybdenum dioxide as an alternative catalyst for direct utilization of methane in tubular solid oxide fuel cells10.1016/j.elecom.2017.12.004 ↗
10. Numerical analysis of thermal and electrochemical phenomena for anode supported microtubular SOFC10.1002/aic.11697 ↗
11. Recent advances in material and performance aspects of solid oxide fuel cells
12. Operation of micro tubular solid oxide fuel cells integrated with propane reformers10.1016/j.ijhydene.2019.10.061 ↗
13. Multi-length scale microstructural design of micro-tubular Solid Oxide Fuel Cells for optimised power density and mechanical robustness10.1016/j.jpowsour.2019.226744 ↗
14. High performance metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2018.11.004 ↗
15. Effect of cell-to-cell distance in segmented-in-series solid oxide fuel cells10.1016/j.ijhydene.2014.11.133 ↗
16. Effect of cathode geometry on the electrochemical performance of flat tubular segmented-in-series(SIS) solid oxide fuel cell10.1016/j.ijhydene.2015.03.040 ↗
17. A numerical study on anode thickness and channel diameter of anode-supported flat-tube solid oxide fuel cells10.1016/j.renene.2011.08.022 ↗
18. Design of a dual-layer ceramic interconnect based on perovskite oxides for segmented-in-series solid oxide fuel cells10.1016/j.jpowsour.2015.09.082 ↗
19. Effects of cell geometries on performance of tubular solid oxide fuel cell10.1016/j.jpowsour.2015.08.013 ↗
20. Fabrication of a flat tubular segmented-in-series solid oxide fuel cell using decalcomania paper10.1002/fuce.201300188 ↗
21. Development of novel micro flat-tube solid-oxide fuel cells10.1016/j.elecom.2011.04.019 ↗
22. Changes in the mechanical properties of support materials for segmented-in-series type solid oxide fuel cells as a function of time10.1016/j.jpowsour.2013.07.071 ↗
23. Characteristics of flat-tubular ceramic supported segmented-in-series solid oxide fuel cell on all sides laminating using decalcomania method10.1016/j.jpowsour.2014.03.136 ↗
24. A tubular segmented-in-series solid oxide fuel cell with metallic interconnect films: a performance study through mathematical simulations10.1016/j.cap.2013.07.025 ↗
25. Coupled analysis of performance and costs of segmented-in-series tubular solid oxide fuel cell for combined cycle system10.1016/j.ijhydene.2017.06.031 ↗
26. Evaluation of micro flat-tube solid-oxide fuel cell modules using simple gas heating apparatus10.1016/j.jpowsour.2014.08.122 ↗
27. Optimization of manifold design for 1 kW-class flat-tubular solid oxide fuel cell stack operating on reformed natural gas10.1016/j.jpowsour.2016.07.077 ↗
28. Durability of a segmented-in-series tubular SOFC with a (Ce, Sm)O2 cathode interlayer: influence of operating conditions10.1149/2.027403jes ↗
29. Start-up characteristics of segmented-in-series tubular SOFC power modules improved by catalytic combustion at cathodes10.1002/fuce.201400014 ↗