journal article·2022-11

Solvothermal preparation and electrochemical characteristics of Sb2Se3@C nanorods in quasi-solid-state batteries

Guoli Xu, Lei Ma, Chengqian Gu, Zhihui Jie, Xuan Cui, Chen Zhang, Lei Liu

Acta Materialia· Volume 240
Publisher page

Abstract

Antinomy(III) selenide (Sb 2Se 3 ) nanorods were successfully prepared using a simple solvothermal method and then carbon-coated employing an ex-situ coating process with glucose as the carbon source. The composition and morphology of the prepared samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. In electrochemical investigations, Sb 2Se 3 @C nanorods presented initial specific discharge capacities of 626.0 mAh·g −1 and 319.9 mAh·g −1 at 0.1 C and 1 C in a half-cell structure, respectively, with capacity retentions of 66.4 and 81.8% after 100 cycles. Electrochemical impedance spectroscopy analysis and galvanostatic intermittent titration technique tests revealed that carbon coating effectively promotes both the electronic and ionic conductivities of the Sb 2Se 3 @C material, which is beneficial for its electrochemical performance. A Sb 2Se 3@C/Li 1.3Al 0.3Ti 1.7(PO 4) 3/LiFePO 4 quasi-solid-state battery was also assembled and delivered a specific discharge capacity of 332.4 mAh·g −1 at 0.2 C with a capacity retention of 60.1% after 100 cycles. In this work, Sb 2Se 3 @C nanorods were successfully explored as anode material for quasi-solid-state lithium batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Experimental and numerical methods to investigate the overcharge caused lithium plating for lithium ion battery10.1016/j.ensm.2020.06.021 ↗
2. Particulate anion sorbents as electrolyte additives for lithium batteries10.1002/adfm.202003055 ↗
3. Investigation of Li-In alloy application as anode for all-solid-state batteries
4. Highly cyclable all-solid-state battery with deposition-type lithium metal anode based on thin carbon black layer
5. Redox activity of Li2S–P2S5 electrolyte inducing chemo-mechanical failure in all-solid-state batteries comprising sulfur composite cathode and Li–Si alloy anode10.1016/j.cej.2022.136229 ↗
6. A Li2S-based all-solid-state battery with high energy and superior safety10.1126/sciadv.abl8390 ↗
7. Ultralong Sb2Se3 nanowire-based free-standing membrane anode for lithium/sodium ion batteries10.1021/acsami.6b11544 ↗
8. 2D layered Sb2Se3-based amorphous composite for high-performance Li-and Na-ion battery anodes10.1016/j.jpowsour.2019.05.047 ↗
9. Efficiency improvement of flexible Sb2Se3 solar cells with non-toxic buffer layer via interface engineering10.1016/j.nanoen.2020.104577 ↗
10. Reversible interaction of Sb with an active Se matrix enhances the cycle stability of electrodes for lithium-ion batteries10.1021/acs.chemmater.8b05272 ↗
11. Synthesis and electrochemical properties of Sb2Se3 nanowires prepared by a gas induced reduction method10.1166/jnn.2013.5982 ↗
12. Electrospun Sb2Se3@C nanofibers with excellent lithium storage properties10.1016/j.cclet.2019.11.039 ↗
13. Synergistic effect of antimony-triselenide on addition of conductive hybrid matrix for high-performance lithium-ion batteries10.1016/j.jallcom.2020.154410 ↗
14. Mechanically and structurally stable Sb2Se3/carbon nanocomposite as anode for the lithium-ion batteries10.1016/j.jallcom.2021.159859 ↗
15. Construction of Sb2Se3 nanocrystals on Cu2−xSe@C nanosheets for high performance lithium storage10.1039/C9NJ03795K ↗
16. The charge/discharge mechanism and electrochemical performance of CuV2O6 as a new anode material for Li-ion batteries10.1039/C5CP03435C ↗
17. Electrochemical performance of cobalt vanadium oxide/natural graphite as anode for lithium ion batteries10.1016/j.jpowsour.2015.01.187 ↗
18. Facile synthesis and in situ transmission electron microscopy investigation of a highly stable Sb2Te3/C nanocomposite for sodium-ion batteries10.1016/j.ensm.2017.07.010 ↗
19. Investigation of electrochemical reaction mechanism for antimony selenide nanocomposite for sodium-ion battery electrodes10.1007/s10800-018-1267-2 ↗
20. Rodlike Sb2Se3 wrapped with carbon: the exploring of electrochemical properties in sodium-ion batteries10.1021/acsami.7b10886 ↗
21. Carbon-coated Sb2Se3 composite as anode material for sodium ion batteries10.1016/j.elecom.2015.08.014 ↗
22. Cube-like Sb2Se3/C constructed by ultrathin nanosheets as anode material for lithium and sodium-ion batteries10.1007/s11581-018-2782-1 ↗
23. Boosting potassium storage by integration advantageous of defect engineering and spatial confinement: a case study of Sb2Se310.1002/smll.202005272 ↗
24. Transport and interface characteristics of Te-doped NASICON solid electrolyte Li1.3Al0.3Ti1.7(PO4)310.1016/j.electacta.2021.139367 ↗
25. A new rGO-overcoated Sb2Se3 nanorods anode for Na+ battery: in situ X-ray diffraction study on a live sodiation/desodiation process10.1002/adfm.201606242 ↗
26. Porous hollow carbon spheres for electrode material of supercapacitors and support material of dendritic Pt electrocatalyst10.1016/j.jpowsour.2015.01.096 ↗
27. Carbon quantum dots and their derivative 3D porous carbon frameworks for sodium-ion batteries with ultralong cycle life10.1002/adma.201503816 ↗
28. Coated/sandwiched rGO/CoSx composites derived from metal–organic frameworks/GO as advanced anode materials for lithium-ion batteries10.1002/chem.201504399 ↗
29. Synthesis of vesicle-like MgFe2O4/graphene 3D network anode material with enhanced lithium storage performance10.1021/acssuschemeng.6b01949 ↗
30. One-dimensional rod-like Sb2S3-based anode for high-performance sodium-ion batteries10.1021/acsami.5b05509 ↗
31. Graphene nanosheets suppress the growth of Sb nanoparticles in an Sb/C nanocomposite to achieve fast Na storage10.1002/ppsc.201500248 ↗
32. Enhanced sodium storage behavior of carbon coated anatase TiO2 hollow spheres10.1039/C5TA04009D ↗
33. Hollow nanotubes of N-doped carbon on CoS10.1002/anie.201608489 ↗
34. Sb nanoparticles encapsulated into porous carbon matrixes for high-performance lithium-ion battery anodes10.1016/j.jpowsour.2016.09.027 ↗
35. Antimony selenide nanorods decorated on reduced graphene oxide with excellent electrochemical properties for Li-ion batteries10.1149/2.0201713jes ↗
36. Fast, green microwave-assisted synthesis of single crystalline Sb2Se3 nanowires towards promising lithium storage10.1016/j.jechem.2018.03.013 ↗
37. Ultra small few layer MoS2 embedded into three-dimensional macro-micro-mesoporous carbon as a high performance lithium ion batteries anode with superior lithium storage capacity10.1016/j.electacta.2019.06.025 ↗
38. Encapsulating MnO nanoparticles within foam-like carbon nanosheet matrix for fast and durable lithium storage10.1016/j.nanoen.2018.06.018 ↗
39. Morphology-controlled synthesis and lithium storage properties of SnO2@C@MoS2 hollow nanospheres with petaloid and granular MoS2 nanosheets as the external layer in different solvents10.1016/j.jallcom.2020.156745 ↗
40. Studies on kinetics and diffusion characteristics of lithium ions in TiNb2O710.1016/j.electacta.2020.136208 ↗
41. Nickel foam supported mesoporous MnO2 nanosheet arrays with superior lithium storage performance
42. Multifunctional Co3S4/graphene composites for lithium ion batteries and oxygen reduction reaction10.1002/chem.201204549 ↗
43. Controlled synthesis of hollow C@TiO2@MoS2 hierarchical nanospheres for high-performance lithium-ion batteries10.1039/C8NR05451G ↗
44. CoS2 hollow spheres: fabrication and their application in lithium-ion batteries10.1021/jp111626a ↗
45. Quasi-solid-state sodium-ion full battery with high-power/energy densities10.1021/acsami.8b02768 ↗
46. High-energy all-solid-state lithium batteries with ultralong cycle life10.1021/acs.nanolett.6b03448 ↗
47. Cu2ZnSnS4/graphene nanocomposites for ultrafast, long life all-solid-state lithium batteries using lithium metal anode10.1016/j.ensm.2016.02.004 ↗
48. Three-dimensional alloy interface between Li6.4La3Zr1.4Ta0.6O12 and Li metal to achieve excellent cycling stability of all-solid-state battery10.1016/j.jpowsour.2021.230062 ↗
49. solid state energy storage device with supercapacitor-battery hybrid design10.1039/C7TA02638B ↗
50. Enhancement of the high-rate capability of solid-state lithium batteries by nanoscale interfacial modification10.1002/adma.200502604 ↗
51. High areal capacity LiNi1/3Co1/3Mn1/3O2 positive composite electrode employing an oxide solid electrolyte for an all-solid-state lithium-ion battery10.1016/j.ssi.2022.115905 ↗
52. The cathode composition, a key player in the success of Li-metal solid-state batteries10.1021/acs.jpcc.8b04626 ↗
53. Ultrathin aramid/COF heterolayered membrane for solid-state Li-metal batteries10.1021/acs.nanolett.0c03133 ↗
54. All-oxide solid-state lithium-ion battery employing 50Li2SO4–50Li2CO3 glass electrolyte10.1016/j.jpowsour.2021.229620 ↗
55. Structural engineering of cathodes for improved Zn-ion batteries10.1016/j.jechem.2020.09.035 ↗
56. A novel all-solid-state thin-film-type lithium-ion battery with in situ prepared positive and negative electrode materials10.1016/j.elecom.2008.12.004 ↗
57. Electrochemically induced highly ion conductive porous scaffolds to stabilize lithium deposition for lithium metal anodes10.1039/C9TA01834D ↗
58. Exfoliated V5S8/graphite nanosheet with excellent electrochemical performance for enhanced lithium storage10.1016/j.cej.2017.03.069 ↗
59. V5S8–graphite hybrid nanosheets as a high rate-capacity and stable anode material for sodium-ion batteries10.1039/C6EE03173K ↗