journal article·2024-11

Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions

Peiben Wang, Chengshan Xu, Weiran Jiang, Wanlin Wang, Lirong Liu, Jiangna Gu, Zhuwei Fan, Mengqi Zhang, Jingru Huang, Fachao Jiang, Xuning Feng

Publisher page

Abstract

In pouch cell modules, the sealing edges of the aluminum-plastic film are often installed facing either downward or up upward. The different sealing edge directions could lead to varying results of thermal runaway. The thermal runaway difference of different sealing edge install directions needs to be studied to help improve module safety. This paper proposes a novel experimental method for conducting thermal runaway tests on pouch cells with different sealing edge directions. The differences in heat generation and gas production of the cells are evaluated through Constant Volume Reactor and Gas Chromatograph analysis. The results indicate that the hazard is higher when the sealing edge is facing down compared to facing up. When thermal runaway is triggered in a 60 mm*60 mm heating area, the sealing edge facing downward delays the internal thermal runaway propagation time by 22.59 % compared to when it faces upward. The mass loss, peak venting pressure, and gas volume are respectively higher by 7.26 %, 14.52 %, and 1.78 %. Gas chromatograph analysis indicated minimal impact of sealing edge orientation on gas composition. This work provides guidance for the design of pouch cell modules, clarifying the optimal installation direction of sealing edges.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Damping characterization of electromagnetic shock absorbers by considering engagement and disengagement
2. Quantitative power flow characterization of energy harvesting shock absorbers by considering motion bifurcation10.3390/en15196887 ↗
3. Theoretical modeling and optimal matching on the damping property of mechatronic shock absorber with low speed and heavy load capacity10.1016/j.jsv.2022.117113 ↗
4. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
5. A comparative study of the venting gas of lithium-ion batteries during thermal runaway triggered by various methods
6. Modelling of thermal runaway propagation in lithium-ion battery pack using reduced-order model10.1016/j.energy.2023.126646 ↗
7. Early warning of battery failure based on venting signal10.1016/j.est.2022.106536 ↗
8. Decoupling of heat generated from ejected and non-ejected contents of 18650-format lithium-ion cells using statistical methods10.1016/j.jpowsour.2018.10.099 ↗
9. A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries10.1016/j.etran.2019.100034 ↗
10. High safety and cycling stability of ultrahigh energy lithium ion batteries
11. Preventing cell-to-cell propagation of thermal runaway in lithium-ion batteries10.1149/1945-7111/ab6ff0 ↗
12. Electrochemical profiling method for diagnosis of inhomogeneous reactions in lithium-ion batteries
13. Fast charging Li-ion batteries for a new era of electric vehicles
14. Quantitative identification of emissions from abused prismatic Ni-rich lithium-ion batteries10.1016/j.etran.2019.100031 ↗
15. Cell-level thermal runaway behavior of large-format Li-ion pouch cells10.1016/j.firesaf.2023.103904 ↗
16. Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes10.1039/C3RA45748F ↗
17. Heat transfer effects on accelerating rate calorimetry of the thermal runaway of Lithium-ion batteries10.1016/j.psep.2022.04.028 ↗
18. Thermal runaway of Li-ion cells: how internal dynamics, mass ejection, and heat vary with cell geometry and abuse type10.1149/1945-7111/ac4fef ↗
19. Thermal runaway propagation behavior of the Cell-to-Pack battery system10.1016/j.jechem.2023.05.015 ↗
20. A 3D simulation model of thermal runaway in Li-ion batteries coupled particles ejection and jet flow10.1016/j.jpowsour.2023.233357 ↗
21. The preload force effect on the thermal runaway and venting behaviors of large-format prismatic LiFePO4 batteries10.1016/j.apenergy.2022.120100 ↗
22. Electrolyte design for stable electrode-electrolyte interphase to enable high-safety and high-voltage batteries10.1016/j.etran.2022.100216 ↗
23. No thermal runaway propagation optimization design of battery arrangement for cell-to-chassis technology10.1016/j.etran.2022.100199 ↗
24. Thermal runaway modeling of large format high-nickel/silicon-graphite lithium-ion batteries based on reaction sequence and kinetics10.1016/j.apenergy.2021.117943 ↗
25. Experimental investigation on the characteristics of thermal runaway and its propagation of large-format lithium ion batteries under overcharging and overheating conditions10.1016/j.energy.2021.121103 ↗
26. Experimental study on suppressing thermal runaway propagation of lithium-ion batteries in confined space by various fire extinguishing agents10.1016/j.psep.2022.09.016 ↗
27. Study on thermal runaway mechanism of 1000 mAh lithium ion pouch cell during nail penetration10.1007/s10973-020-10149-4 ↗
28. Thermal runaway propagation and combustion characteristics of enclosed LiNi0.8Co0.1Mn0.1O2 pouch battery modules in an open environment10.1016/j.est.2024.110877 ↗
29. Thermal runaway characteristics and modeling of LiFePO4 power battery for electric vehicles10.1007/s42154-023-00226-3 ↗
30. In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode
31. Comparing different thermal runaway triggers for two automotive lithium-ion battery cell types10.1149/1945-7111/abbe5a ↗
32. Thermal runaway front in failure propagation of long-shape lithium-ion battery10.1016/j.ijheatmasstransfer.2021.121928 ↗
33. Mechanism of internal thermal runaway propagation in blade batteries10.1016/j.jechem.2023.09.050 ↗
34. Correlative acoustic time-of-flight spectroscopy and X-ray imaging to investigate gas-induced delamination in lithium-ion pouch cells during thermal runaway10.1016/j.jpowsour.2020.228039 ↗
35. In situ observation of thermal runaway propagation in lithium-ion battery electrodes triggered by high-frequency induction heating10.1016/j.xcrp.2023.101465 ↗
36. Model and experiments to investigate thermal runaway characterization of lithium-ion batteries induced by external heating method10.1016/j.jpowsour.2021.230065 ↗
37. Heating power and heating energy effect on the thermal runaway propagation characteristics of lithium-ion battery module: experiments and modeling10.1016/j.apenergy.2022.118760 ↗
38. Thermal and gas characteristics of large-format LiNi0.8Co0.1Mn0.1O2 pouch power cell during thermal runaway10.1016/j.est.2021.102609 ↗
39. Preventing Li-ion cell explosion during thermal runaway with reduced pressure10.1016/j.applthermaleng.2017.06.056 ↗
40. A lumped model of venting during thermal runaway in a cylindrical Lithium Cobalt Oxide lithium-ion cell10.1016/j.jpowsour.2015.12.088 ↗
41. Modeling vaporization, gas generation and venting in Li-ion battery cells with a dimethyl carbonate electrolyte10.1149/2.0631709jes ↗
42. Effect of safety valve types on the gas venting behavior and thermal runaway hazard severity of large-format prismatic lithium iron phosphate batteries10.1016/j.jechem.2023.09.052 ↗
43. Study on the characteristic of boiling expansion process of superheated LPG and its vapor cloud explosion10.1016/j.jlp.2022.104831 ↗
44. Research on the effect of the vent area on the external deflagration process during the explosion vent10.1016/j.fuel.2022.125440 ↗
45. Heat transfer experiments and correlations for vent gases emerging from a Li-ion battery and impinging on a flat surface10.1016/j.ijheatmasstransfer.2022.123516 ↗
46. CFD-based thermal abuse simulations including gas generation and venting of an 18650 Li-ion battery cell10.1149/1945-7111/acf4c1 ↗
47. Simulating onset and evolution of thermal runaway in Li-ion cells using a coupled thermal and venting model10.1016/j.apenergy.2020.114972 ↗