journal article·2024-05

An asymmetric double-layer poly(ethylene oxide)/inorganic composite electrolyte for stable and dendrite-suppressing all-solid-state Li metal battery

Haotong Li, Jing liu, Fei Deng, Husitu Lin, Deping Wang, Xia Tao

Publisher page

Abstract

Poly (ethylene oxide) (PEO)-based electrolytes are promising in all-solid-state Li metal batteries on account of their distinct merits of cost-effectiveness, good chemical stability against Li metal and facile large-scale membrane fabrication. However, the application of PEO-based electrolytes is mainly hindered by their low ionic conductivity and the risk of short circuit derived from lithium dendrite growth. In this study, we report an asymmetric composite PEO-based solid electrolyte with a bilayer structure, i.e. Li 6PS 5Cl-PEO-LiTFSI/Li 1.3Al 0.3Ti 1.7(PO 4) 3-PEO-LiTFSI (LPSCl-PEO/LATP-PEO) composite electrolyte, in which the LATP-PEO layer as the main part of electrolyte faces toward the LiFePO 4 cathode and the LPSCl-PEO layer contacts with Li metal. The ionic conductivity of LPSCl-PEO/LATP-PEO based on 2 % of LPSCl nanoparticles and containing 15 % of LATP nanoparticles reaches up to 3.37 × 10 −4 S cm −1, comparable to that of other modified PEO-base electrolyte. Benefiting from the excellent ionic transport capacity and interfacial stability, the Li/Li batteries based on the optimal LPSCl-PEO/LATP-PEO stably cycles over 2000 h with no short-circuit at a current density of 0.2 mA cm −2, which is significantly better than pure PEO and unmodified LATP-PEO single-layer electrolyte. Moreover, Li/LiFePO 4 all-solid-state battery with the LPSCl-PEO/LATP-PEO electrolyte has a highest capacity of 156.3 mAh g −1 with a capacity decay rate of 0.0375 % per cycle after 400 cycles at 0.5C, and its coulombic efficiency approaching 100 %. This asymmetric double-layer structure electrolyte prepared by a simple and scalable solution casting method provides a feasible solution for the application in stable and dendrite-suppressing all-solid-state Li metal battery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
3. Confronting the challenges in lithium anodes for lithium metal batteries
4. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
5. Engineering Janus interfaces of ceramic electrolyte via distinct functional polymers for stable high-voltage Li-metal batteries10.1021/jacs.9b03517 ↗
6. Double-layered multifunctional composite electrolytes for high-voltage solid-state lithium-metal batteries10.1021/acsami.0c22532 ↗
7. Stable interface of a high-energy solid-state lithium metal battery via a sandwich composite polymer electrolyte10.1016/j.jpowsour.2021.229835 ↗
8. Differentiated lithium salt design for multilayered PEO electrolyte enables a high‐voltage solid‐state lithium metal battery10.1002/advs.201901036 ↗
9. Dendrites in solid‐state batteries: ion transport behavior, advanced characterization, and interface regulation10.1002/aenm.202003250 ↗
10. Robust interface layers with redox shuttle reactions suppress the dendrite growth for stable solid-state Li metal batteries10.1016/j.jechem.2020.03.060 ↗
11. Unlocking the failure mechanism of solid state lithium metal batteries
12. Rational design of high-performance PEO/ceramic composite solid electrolytes for lithium metal batteries10.1007/s40820-023-01055-z ↗
13. Investigation of polymer/ceramic composite solid electrolyte system: the case of PEO/LGPS composite electrolytes10.1021/acssuschemeng.1c00904 ↗
14. Te doping effect on the structure and ionic conductivity of LiTa2PO8 solid electrolyte10.1016/j.ceramint.2022.09.163 ↗
15. Ionic transport in solid-state composite poly(trimethylene carbonate)–Li6.7Al0.3La3Zr2O12 electrolytes: the interplay between surface chemistry and ceramic particle loading10.1016/j.electacta.2023.142785 ↗
16. PEO/garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic”10.1016/j.nanoen.2017.12.037 ↗
17. New insights into the compositional dependence of Li-ion transport in polymer–ceramic composite electrolytes10.1021/acsami.7b17301 ↗
18. Fast Li+ conduction mechanism and interfacial chemistry of a NASICON/polymer composite electrolyte10.1021/jacs.9b12233 ↗
19. Functional additives for solid polymer electrolytes in flexible and high‐energy‐density solid‐state lithium‐ion batteries10.1002/cey2.146 ↗
20. The electrochemical failure mechanism investigation of Li1+xAlxTi2−x(PO4)3 solid-state electrolytes10.1039/D3TA01458D ↗
21. Interphase morphology between a solid-state electrolyte and lithium controls cell failure10.1021/acsenergylett.9b00093 ↗
22. In situ electrochemical modification of the Li/Li1.3Al0.3Ti1.7(PO4)3 interface in solid lithium metal batteries via an electrolyte additive10.1016/j.jcis.2023.03.069 ↗
23. NASICON‐Based solid state Li‐fluoride conversion batteries enabled by constructing a fluorine‐rich trap for Ti4+10.1002/aenm.202203679 ↗
24. Distinct functional Janus interfaces for dendrite-free Li1.3Al0.3Ti1.7(PO4)3-based lithium metal batteries10.1016/j.electacta.2022.141395 ↗
25. Suppression of lithium dendrites in all-solid-state lithium batteries by using a Janus-structured composite solid electrolyte10.1016/j.cej.2022.136479 ↗
26. Swallowing lithium dendrites in all‐solid‐state battery by lithiation with silicon nanoparticles
27. Preparation and performances of poly (ethylene oxide)-Li6PS5Cl composite polymer electrolyte for all-solid-state lithium batteries10.1016/j.jelechem.2021.115739 ↗
28. A high energy and power all-solid-state lithium battery enabled by modified sulfide electrolyte film10.1016/j.jpowsour.2020.229325 ↗
29. Interphase Formation of PEO20:LiTFSI–Li6PS5Cl composite electrolytes with lithium metal10.1021/acsami.9b22968 ↗
30. Li1.3Al0.3Ti1.7(PO4)3 reinforced hybrid polymer composites: assessment of enhanced Li+ ion transport and potential for solid-state supercapacitor applications10.1007/s10853-019-04234-9 ↗
31. A multiscale hollow spherical LATP active filler improves conductivity and mechanical strength in composite solid electrolytes for Li batteries10.1021/acs.jpcc.2c04870 ↗
32. Revealing the role of active fillers in Li‐ion conduction of composite solid electrolytes10.1002/smll.202305326 ↗
33. A long cycle life, all-solid-state lithium battery with a ceramic–polymer composite electrolyte10.1021/acsaem.9b02547 ↗
34. Preparation of high ionic conductivity composite solid electrolyte with in-situ synthesis of LLZO@ZiF-6710.1016/j.electacta.2022.141155 ↗
35. Ultraviolet irradiated PEO/LATP composite gel polymer electrolytes for lithium-metallic batteries (LMBs)10.1016/j.apsusc.2019.07.179 ↗
36. PI-LATP-PEO electrolyte with high safety performance in solid-state lithium metal batteries10.1021/acsaem.2c00745 ↗
37. Integrated structure of cathode and double-layer electrolyte for highly stable and dendrite-free all-solid-state Li-metal batteries10.1021/acsami.0c16390 ↗
38. Properties of the interphase formed between argyrodite-type Li6PS5Cl and polymer-based PEO10:LiTFSI10.1021/acsami.9b14506 ↗
39. Lithium fluoride additives for stable cycling of lithium batteries at high current densities10.1002/aelm.201500246 ↗
40. Understanding the relationships between morphology, solid electrolyte interphase composition, and coulombic efficiency of lithium metal10.1021/acsami.0c00789 ↗
41. Inner lithium fluoride (LiF)-Rich solid electrolyte interphase enabled by a smaller solvation sheath for fast-charging lithium batteries10.1021/acsami.2c17628 ↗
42. Lithiated Nafion-garnet ceramic composite electrolyte membrane for solid-state lithium metal battery10.1016/j.jechem.2019.11.012 ↗