Diesel operated combined heat and power SOFC system: SOFC characterization and proof of concept
Source abstract
Abstract
The high volumetric energy density and easy storage capability of liquid hydrocarbons such as bio-diesel or diesel are needed for power generation in several applications such as ships and isolated or rural areas which only have limited access to other power grids. Solid oxide fuel cells (SOFCs) can in theory utilize such fuels in a high efficient manner, which could reduce greenhouse gas emissions and energy demand. However, SOFC systems able to directly utilize diesel are rather complex to design and monitor, leading to several possible causes of system lifetime reduction. To avoid an enhanced reduction of the system lifetime, the operating conditions of all components must be optimized and monitored in detail. However, detailed monitoring and identification of the cause of performance loss are challenging using conventional system monitoring methods. Therefore, here we (i) show the concept and characterization of a SOFC system operating under steam- and auto-thermal diesel reforming conditions, (ii) demonstrated the applicability of advanced methods to monitor complex SOFC systems, which are applied on the 30 cell SOFC stack during system operation and (iii) analyzed the efficiency potential of the SOFC within the developed system. The results present in this work are favorable to accelerate commercialization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Stationary electrical energy storage technology for global energy sustainability: A review
2. Challenges and perspectives for solar fuel production from water/carbon dioxide with thermochemical cycles10.1007/s43979-023-00048-6 ↗
3. In situ construction of cyano-modified g-c3n4 nanolayer-coated srtio3 nanotubes by gas-solid reaction for efficient photocatalytic solar fuel production10.1016/j.cej.2023.143817 ↗
4. An overview on modelling approaches for photochemical and photoelectrochemical solar fuels processes and technologies10.1016/j.enconman.2023.117366 ↗
5. Recent advancements in photoelectrochemical water splitting for hydrogen production10.1007/s41918-022-00153-7 ↗
6. Integration of solid oxide electrolyzer and Fischer-Tropsch: A sustainable pathway for synthetic fuel10.1016/j.apenergy.2015.10.053 ↗
7. UV-cured self-healing gel polymer electrolyte toward safer room temperature lithium metal batteries10.1016/j.electacta.2022.141265 ↗
8. An exploratory study of MoS2 as anode material for potassium batteries10.3390/batteries8110242 ↗
9. High-energy room-temperature sodium–sulfur and sodium–selenium batteries for sustainable energy storage10.1007/s41918-023-00182-w ↗
10. Advances in Mn-based electrode materials for aqueous sodium-ion batteries10.1007/s40820-023-01162-x ↗
11. Stability evaluation of a grid-tied hybrid wind/PV farm joined with a hybrid energy-storage system10.1186/s42834-023-00181-y ↗
12. Liquids-to-power using low-temperature solid oxide fuel cells10.1002/ente.201800408 ↗
13. On the technical challenges affecting the performance of direct internal reforming biogas solid oxide fuel cells10.1016/j.rser.2018.10.025 ↗
14. Diesel based SOFC demonstrator for maritime applications10.1149/07801.0171ecst ↗
15. Solid oxide fuel based auxiliary power unit for regional jets: Design and mission simulation with different cell geometries10.1115/1.3176282 ↗
16. Canadian remote community power generation: How reformer and fuel cell systems compare with diesel generators10.1002/er.4345 ↗
17. Operation of a solid oxide fuel cell based power system with ammonia as a fuel: Experimental test and system design10.3390/en13236173 ↗
18. Fuel flexibility of solid oxide fuel cells10.1002/fuce.202100037 ↗
19. Towards a wastewater energy recovery system: The utilization of humidified ammonia by a solid oxide fuel cell stack10.1016/j.jpowsour.2019.227608 ↗
20. Thermodynamics of SOFC efficiency and fuel utilization as functions of fuel mixtures and operating conditions10.1016/j.jpowsour.2006.05.006 ↗
21. Study of a solid oxide fuel cell fed with n-dodecane reformate. Part II: Effect of the reformate composition10.1016/j.ijhydene.2016.06.048 ↗
22. On-board diesel fuel processing for an SOFC–APU—Technical challenges for catalysis and reactor design10.1016/j.apcatb.2006.02.025 ↗
23. Autothermal reforming of commercial jet A-1 on a 5kWe scale10.1016/j.ijhydene.2007.07.060 ↗
24. Liquid biofuels for solid oxide fuel cells: A review10.1016/j.jpowsour.2022.232437 ↗
25. Direct steam reforming of diesel and diesel–biodiesel blends for distributed hydrogen generation10.1016/j.ijhydene.2014.10.062 ↗
26. Steam reforming of commercial ultra-low sulphur diesel10.1016/j.jpowsour.2011.03.009 ↗
27. H.A.J. Van Dijk, J.P. Ouweltjes, R.G. Nyqvist, Diesel CPO for SOFC Development of a cold-flame assisted CPO reactor coupled to a SOFC, in: Energy Research Centre of the Netherlands, 2009, p. 38, URL.
28. Liquid fuel processing for hydrogen production: A review10.1016/j.ijhydene.2016.08.135 ↗
29. A techno-economic comparison of fuel processors utilizing diesel for solid oxide fuel cell auxiliary power units10.1016/j.jpowsour.2010.09.011 ↗
30. Long-term stability at fuel processing of diesel and kerosene10.1016/j.ijhydene.2014.03.148 ↗
31. A novel reactor type for autothermal reforming of diesel fuel and kerosene10.1016/j.apenergy.2015.04.038 ↗
32. Recent advances in diesel autothermal reformer design10.1016/j.ijhydene.2019.11.137 ↗
33. Comparative study of gasoline, diesel and biodiesel autothermal reforming over Rh-based FeCrAl-supported composite catalyst10.1016/j.ijhydene.2020.01.076 ↗
34. Reforming of diesel and jet fuel for fuel cells on a systems level: Steady-state and transient operation10.1016/j.apenergy.2020.115882 ↗
35. Recent advances in catalytic oxidation and reformation of jet fuels10.1016/j.apenergy.2015.12.057 ↗
36. The operating characteristics of solid oxide fuel cells driven by diesel autothermal reformate10.1016/j.ijhydene.2008.07.123 ↗
37. A diesel-driven, metal-based solid oxide fuel cell10.1016/j.jpowsour.2013.10.100 ↗
38. Electrochemical analysis of sulfur-poisoning in anode supported SOFCs fuelled with a model reformate10.1149/2.015206jes ↗
39. Numerical model of planar anode supported solid oxide fuel cell fed with fuel containing H2S operated in direct internal reforming mode (DIR-SOFC)10.1016/j.apenergy.2018.09.092 ↗
40. Degradation of SOFCs by various impurities: Impedance spectroscopy and microstructural analysis10.1149/07801.1253ecst ↗
41. Finite element analysis of thermal stress distribution in planar SOFC10.1149/1.2729310 ↗
42. Holistic approach to design, test, and optimize stand-alone sofc-reformer systems10.3390/pr9020348 ↗
43. Analysis of solid oxide fuel and electrolysis cells operated in a real-system environment: State-of-the-health diagnostic, failure modes, degradation mitigation and performance regeneration10.1016/j.pecs.2022.101011 ↗
44. In operando electrochemical impedance spectroscopy monitoring of nickel catalysts for hydrogen production, part I: Methodology and performance characterization10.1016/j.fuel.2022.124256 ↗
45. In situ monitoring of coke deposits during coking and regeneration of solid catalysts by electrical impedance-based sensors10.1002/ceat.200900380 ↗
46. In situ detection of coke deposits on fixed-bed catalysts by a radio frequency-based method10.1016/j.snb.2013.01.022 ↗
47. Development of an impedance-based sensor for detection of catalyst coking in fuel reforming systems10.1016/j.snb.2013.03.084 ↗
48. Study of a solid oxide fuel cell fed with n-dodecane reformate. Part I: Endurance test10.1016/j.ijhydene.2016.02.119 ↗
49. Operation of a solid oxide fuel cell on a reformed FAME mixture10.1016/j.biombioe.2012.09.024 ↗
50. An octane-fueled low temperature solid oxide fuel cell with ru-free anodes10.1016/j.elecom.2008.06.026 ↗
51. Auxiliary power unit based on a solid oxide fuel cell and fuelled with diesel10.1016/j.jpowsour.2005.10.036 ↗
52. SOFC FED with European standard road diesel by an adiabatic prereforming fuel processor for 1000 hours
53. Standalone portable SOFC power generator for autonomous operation10.1149/06801.0143ecst ↗
54. Demonstration of the first European SOFC APU on a heavy duty truck10.1016/j.trpro.2016.05.442 ↗
55. Sasaki · 2016
56. Progress of SOFC residential CHP system: Over 50,000 units market experience of osaka gas10.1149/09101.0043ecst ↗
57. A diesel fuel processor for stable operation of solid oxide fuel cells system: I. Introduction to post-reforming for the diesel fuel processor10.1016/j.cattod.2010.01.006 ↗
58. Pors · 2006 · 182
59. Bio-fuel reformation for solid oxide fuel cell applications. Part 1: Fuel vaporization and reactant mixing10.1016/j.ijhydene.2013.07.009 ↗
60. Small-scale reforming of diesel and jet fuels to make hydrogen and syngas for fuel cells: A review10.1016/j.apenergy.2013.03.028 ↗
61. Thermophysical properties of diesel fuel over a wide range of temperatures and pressures10.1016/j.fuel.2017.11.125 ↗
62. A review of techno-economic data for road transportation fuels10.1016/j.rser.2019.05.041 ↗
63. Water impact on the auto-ignition of kerosene/air mixtures under combustor relevant conditions10.1016/j.fuel.2020.117184 ↗
64. Ignition of shock-heated H2-air-steam mixtures10.1016/S0010-2180(02)00552-7 ↗
65. Influence of steam dilution on the ignition of hydrogen, syngas and natural gas blends at elevated pressures10.1016/j.combustflame.2014.10.005 ↗
66. Condition monitoring of solid oxide fuel cells by fast electrochemical impedance spectroscopy: A case example of detecting deficiencies in fuel supply10.1016/j.jpowsour.2021.229491 ↗
67. Development and application of a comprehensive model-based methodology for fault mitigation of fuel cell powered systems10.1016/j.apenergy.2020.115698 ↗
68. Towards a practical tool for online monitoring of solid oxide fuel cell operation: An experimental study and application of advanced data analysis approaches10.1016/j.apenergy.2018.03.182 ↗
69. Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements10.1016/j.jpowsour.2019.226838 ↗
70. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
71. Accelerated lifetime tests for SOFCs10.1149/06801.1953ecst ↗
72. Electrochemical characterization of La2NiO4-infiltrated La0.6Sr0.4Co0.2Fe0.8O3-δ by analysis of distribution of relaxation times10.1016/j.electacta.2020.136520 ↗
73. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
74. Performance and degradation of solid oxide electrolysis cells in stack10.1149/06801.3491ecst ↗
75. O’Hayre · 2016
76. Fuel processing for low-temperature and high-temperature fuel cells challenges, and opportunities for sustainable development in the 21st century10.1016/S0920-5861(02)00231-6 ↗
77. AVL SOFC systems on the way of industrialization10.1149/05701.0141ecst ↗
78. Efficiency gain of solid oxide fuel cell systems by using anode offgas recycle - results for a small scale propane driven unit10.1016/j.jpowsour.2010.09.016 ↗
79. Design, manufacturing, and operation of movable 2 × 10 kW size rSOC system10.1002/fuce.202100021 ↗