Mitigating first charge overpotential of Li2S-based lithium-sulfur batteries by leveraging PVDF reaction with the LiOH/Li2O layer
Source abstract
Abstract
The high overpotential observed during the first charging process of Li 2 S-based lithium sulfur batteries (Li 2S-LSBs) poses a challenge for their development, as it leads to irreversible side reactions. One possible cause for this overpotential is the high hygroscopic nature of Li 2S, which results in the formation of a highly insulating LiOH/Li 2O layer on the surface of Li 2S particles. This study proposes a novel method to reduce the first charge overpotential of Li 2 S-LSBs by utilizing the reaction between the polyvinylidene fluoride (PVDF) binder and the LiOH/Li 2O layer on the surface of the Li 2S particles. Model reactions demonstrate that LiOH or Li 2O can readily react with PVDF through dehydrofluorination at room temperature. While a battery made with a Li 2S cathode slurry containing PVDF, prepared using conventional grinding for 30 min, displays high charging voltages with an overpotential spike of 3.74 V during the first charge, a battery prepared using a slurry stirred for 48 h exhibits significantly reduced first charge voltages, with an overpotential spike of only 2.75 V. The study also reveals that PVDF can undergo similar dehydrofluorination with Li 2S, which leads to a decrease in discharge capacity due to the consumption of some Li 2S. This study provides new insights into the origin of overpotential during the first charging process of Li 2S-LSBs and suggests that stirring Li 2S cathode slurry in the presence of PVDF can effectively reduce the first charge overpotential of Li 2S-LSBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Recent progress on lithium-ion batteries with high electrochemical performance10.1007/s11426-018-9410-0 ↗
2. 30 Years of lithium‐ion batteries
3. A review on electric vehicle battery modelling: from Lithium-ion toward Lithium–Sulphur10.1016/j.rser.2015.12.009 ↗
4. Nanostructured sulfur cathodes10.1039/c2cs35256g ↗
5. Energy use and climate change improvements of Li/S batteries based on life cycle assessment10.1016/j.jpowsour.2018.02.054 ↗
6. Structural design of cathodes for Li-S batteries10.1002/aenm.201500124 ↗
7. Zinc complex-based multifunctional reactive lithium polysulfide trapper approaching its theoretical efficiency10.1021/acsami.1c04483 ↗
8. Recent advances and strategies toward polysulfides shuttle inhibition for high‐performance Li–S batteries10.1002/advs.202106004 ↗
9. Regulating liquid and solid-state electrolytes for solid-phase conversion in Li–S batteries10.1016/j.chempr.2022.01.002 ↗
10. Recent advances and applications toward emerging lithium–sulfur batteries: working principles and opportunities10.1002/eem2.12257 ↗
11. Stable cycling of Li–S batteries by simultaneously suppressing Li-dendrite growth and polysulfide shuttling enabled by a bioinspired separator10.1039/C9TA12921A ↗
12. Promising cell configuration for next-generation energy storage: Li 2 S/graphite battery enabled by a solvate ionic liquid electrolyte10.1021/acsami.6b03736 ↗
13. Advanced Li 2 S/Si full battery enabled by TiN polysulfide immobilizer10.1002/smll.201902377 ↗
14. A high-performance polymer tin sulfur lithium ion battery10.1002/ange.200907324 ↗
15. Lithium-sulfur batteries: electrochemistry, materials, and prospects10.1002/anie.201304762 ↗
16. Recent advances in lithium sulfide cathode materials and their use in lithium sulfur batteries10.1002/aenm.201500110 ↗
17. Activating Li 2 S as the lithium-containing cathode in lithium–sulfur batteries10.1021/acsenergylett.0c00936 ↗
18. High-capacity micrometer-sized Li 2 S particles as cathode materials for advanced rechargeable lithium-ion batteries10.1021/ja3052206 ↗
19. Understanding abnormal potential behaviors at the 1st charge in Li 2 S cathode material for rechargeable Li–S batteries10.1039/C6CP03146C ↗
20. Revealing the electrochemical charging mechanism of nanosized Li 2 S by in situ and operando X-ray absorption spectroscopy10.1021/acs.nanolett.7b02381 ↗
21. Limited stability of ether-based solvents in lithium–oxygen batteries10.1021/jp306797s ↗
22. The use of redox mediators for enhancing utilization of Li 2 S cathodes for advanced Li–S battery systems10.1021/jz500222f ↗
23. A conductive molecular framework derived Li 2 S/N,P‐codoped carbon cathode for advanced lithium–sulfur batteries
24. Lithium sulfur batteries, a mechanistic review10.1039/C5EE01388G ↗
25. Deciphering the reaction mechanism of lithium–sulfur batteries by in situ/operando synchrotron‐based characterization techniques
26. A quantum-chemical study on the discharge reaction mechanism of lithium-sulfur batteries10.1016/S2095-4956(13)60009-1 ↗
27. First-principles study on the charge transport mechanism of lithium sulfide (Li 2 S) in lithium-sulfur batteries10.1002/asia.201600007 ↗
28. Promoting the transformation of Li 2 S 2 to Li 2 S: significantly increasing utilization of active materials for high‐sulfur‐loading Li–S batteries
29. Nanostructured Li 2 S–C composites as cathode material for high-energy lithium/sulfur batteries10.1021/nl303965a ↗
30. A mechanochemical synthesis of submicron-sized Li 2 S and a mesoporous Li 2 S/C hybrid for high performance lithium/sulfur battery cathodes10.1039/C7TA00557A ↗
31. Trace ethanol as an efficient electrolyte additive to reduce the activation voltage of the Li 2 S cathode in lithium-ion–sulfur batteries10.1039/C9CC04877D ↗
32. Nanoporous Li 2 S and MWCNT-linked Li 2 S powder cathodes for lithium-sulfur and lithium-ion battery chemistries10.1039/C3TA14161F ↗
33. In situ -formed Li 2 S in lithiated graphite electrodes for lithium–sulfur batteries10.1021/ja409705u ↗
34. Surface modification of poly(vinylidene difluoride)(PVDF) by LiOH
35. Phase transfer catalysis in dehydrofluorination of poly(vinylidene fluoride) by aqueous sodium hydroxide solutions10.1002/pol.1983.170211208 ↗
36. Dehydrofluorination of poly(vinylidene fluoride) in dimethylformamide solution: synthesis of an operationally soluble semiconducting polymer10.1002/pol.1985.170230410 ↗
37. Surface modification of poly(vinylidene fluoride) by alkaline treatment1. The degradation mechanism10.1016/S0032-3861(99)00343-2 ↗
38. Mechanochemical solid-phase reaction between polyvinylidene fluoride and sodium hydroxide10.1002/app.1663 ↗
39. Understanding the chemical stability of polymers for lithium–air batteries10.1021/cm5040003 ↗
40. Synergistic coupling between Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 and poly(vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
41. Li 0.35 La 0.55 TiO 3 nanofibers enhanced poly(vinylidene fluoride)-based composite polymer electrolytes for all-solid-state batteries10.1021/acsami.9b14824 ↗
42. 3D coral-like LLZO/PVDF composite electrolytes with enhanced ionic conductivity and mechanical flexibility for solid-state lithium batteries10.1021/acsami.0c15004 ↗
43. Catalytic disproportionation for suppressing polysulfide shuttle in Li–S pouch cells: beyond adsorption interactions10.1002/aenm.202201912 ↗
44. The contrastive study of chemical treatment on the properties of PVDF/PFSA and PVDF/PVP ultrafiltration membranes10.1016/j.desal.2014.02.027 ↗
45. Experimental and DFT investigation of surface degradation of polyvinylidene fluoride membrane in alkaline solution10.1016/j.susc.2011.02.022 ↗
46. Ftir and DSC studies of mechanically deformed β-PVDF films10.1081/MB-100106174 ↗
47. Chemical dehydrofluorination and electrical conductivity of poly(Viny1idene fluoride) films10.1002/apmc.1989.051680117 ↗
48. A gamma fluorinated ether as an additive for enhanced oxygen activity in Li–O2 batteries10.1039/C5TA03439F ↗
49. A kinetic study of CO2 sorption/desorption of lithium silicate synthesized through a ball milling method10.1016/j.tca.2021.178918 ↗
50. Reversible reduction of Li2CO310.1039/C5TA02499D ↗
51. Conversion from Li2SO4 to Li2S@C on carbon paper matrix: a novel integrated cathode for lithium-sulfur batteries10.1016/j.jpowsour.2016.09.033 ↗
52. A novel molecular synthesis route to Li 2 S loaded carbon fibers for lithium–sulfur batteries10.1039/D2TA00369D ↗
53. Review Progress in Ostwald ripening theories and their applications to nickel-base superalloys Part I: Ostwald ripening theories10.1023/A:1015388912729 ↗
54. New nanostructured Li 2 S/silicon rechargeable battery with high specific energy10.1021/nl100504q ↗
55. The mechanism of Li2S activation in lithium-sulfur batteries: can we avoid the polysulfide formation?10.1016/j.jpowsour.2017.01.112 ↗
56. Monitoring the electrochemical processes in the lithium–air battery by solid state NMR spectroscopy10.1021/jp410429k ↗
57. Comment on “Cycling Li-O 2 batteries via LiOH formation and decomposition,”10.1126/science.aad8689 ↗
58. Li 2 S in situ grown on three-dimensional porous carbon architecture with electron/ion channels and dual active sites as cathodes of Li–S batteries10.1021/acsami.1c07198 ↗
59. Lithium sulfide (Li 2 S)/graphene oxide nanospheres with conformal carbon coating as a high-rate, long-life cathode for Li/S cells10.1021/acs.nanolett.5b00820 ↗