journal article·2023-10

Low loading inkjet printed bifunctional electrodes for proton exchange membrane unitized regenerative fuel cells

L. Padilla Urbina, J. Liu, N. Semagina, M. Secanell

Publisher page

Abstract

Inkjet printing is evaluated as a feasible technique for unitized regenerative fuel cells (URFCs) electrode fabrication and to study the optimal ionomer and catalyst loading. A physical mixture of Pt, IrO x , and Nafion ionomer was inkjet printed directly on a Nafion membrane to fabricate varying loading bifunctional oxygen electrodes for a URFC and characterized via scanning electrode microscopy and cyclic voltammetry. The results show that the two catalyst do not interfere with one another and that an optimal electrode requires low ionomer loading, i.e., 10 wt%, and significantly lower amount of the IrO x catalyst compared to platinum, i.e., 3:1 Pt-IrO x ratio. A catalyst loading study shows that the highest round-trip efficiency is obtained at around 0.67 mg Pt+IrOx /cm 2 and further increasing the amount of catalyst does not result in a significant cell performance improvement either in water electrolysis or fuel cell mode. Overall, inkjet printing technique was used to fabricate thin bifunctional electrodes reaching round-trip efficiencies of up to 50% at 500 mA/cm 2 using a bifunctional oxygen electrode with only 0.67 mg Pt+IrOx /cm 2 PGM catalyst loading, resulting in the highest efficiency by amount of catalyst reported to date.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Regenerative fuel cells: Recent progress, challenges, perspectives and their applications for space energy system10.1016/j.apenergy.2020.116376 ↗
2. A review on unitized regenerative fuel cell technologies, part-a: Unitized regenerative proton exchange membrane fuel cells10.1016/j.rser.2016.07.046 ↗
3. Combinatorial discovery of bifunctional oxygen reduction—water oxidation electrocatalysts for regenerative fuel cells10.1016/S0920-5861(01)00327-3 ↗
4. Electrocatalytic oxygen evolution reaction (oer) on ru, ir, and pt catalysts: a comparative study of nanoparticles and bulk materials10.1021/cs3003098 ↗
5. Optimization of bifunctional electrocatalyst for pem unitized regenerative fuel cell10.1016/j.electacta.2004.02.068 ↗
6. Unitized regenerative fuel cells: a review on developed catalyst systems and bipolar plates10.1002/fuce.201700018 ↗
7. Deposited ruo2–iro2/pt electrocatalyst for the regenerative fuel cell10.1016/j.ijhydene.2006.06.047 ↗
8. A novel bifunctional electrocatalyst for unitized regenerative fuel cell10.1016/j.jpowsour.2009.07.018 ↗
9. Nanosized pt/iro2 electrocatalyst prepared by modified polyol method for application as dual function oxygen electrode in unitized regenerative fuel cells10.1016/j.ijhydene.2011.12.153 ↗
10. Synthesis and evaluation of ato as a support for pt–iro2 in a unitized regenerative fuel cell10.1016/j.ijhydene.2012.06.095 ↗
11. Development of high-performance membrane-electrode assembly in unitized regenerative fuel cells10.1016/j.jiec.2019.08.029 ↗
12. Optimization of ptir electrocatalyst for pem urfc10.1016/j.ijhydene.2005.04.013 ↗
13. Electrochemical studies of an unsupported ptir electrocatalyst as a bifunctional oxygen electrode in a unitized regenerative fuel cell10.1016/j.jpowsour.2009.02.060 ↗
14. Analysis of low platinum loading thin polymer electrolyte fuel cell electrodes prepared by inkjet printing10.1016/j.electacta.2015.01.028 ↗
15. Iridium oxide/platinum electrocatalysts for unitized regenerative polymer electrolyte fuel cells10.1149/1.1393478 ↗
16. Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells10.1016/S0378-7753(02)00466-4 ↗
17. Pem-type water electrolysis/fuel cell reversible cell with low pgm catalyst loadings10.1149/06917.0919ecst ↗
18. Development of supported bifunctional oxygen electrocatalysts and corrosion-resistant gas diffusion layer for unitized regenerative fuel cell applications10.1016/j.jpowsour.2011.09.071 ↗
19. A novel membrane electrode assembly for improving the efficiency of the unitized regenerative fuel cell10.1016/j.elecom.2008.07.002 ↗
20. Effect of fabrication methods of bifunctional catalyst layers on unitized regenerative fuel cell performance10.1016/j.electacta.2009.04.043 ↗
21. Electrode structure optimization combined with water feeding modes for bi-functional unitized regenerative fuel cells10.1016/j.ijhydene.2013.01.137 ↗
22. Graphitized carbon as an efficient mesoporous layer for unitized regenerative fuel cells10.1016/j.ijhydene.2016.08.092 ↗
23. Modeling and experimental validation of a unitized regenerative fuel cell in electrolysis mode of operation10.1016/j.energy.2017.01.031 ↗
24. Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell10.1016/j.jpowsour.2011.11.041 ↗
25. Membrane electrode assemblies for unitised regenerative polymer electrolyte fuel cells10.1016/j.jpowsour.2005.02.068 ↗
26. Effect of through-plane polytetrafluoroethylene distribution in a gas diffusion layer on a polymer electrolyte unitized reversible fuel cell10.1016/j.ijhydene.2015.09.102 ↗
27. Hierarchical electrode design of highly efficient and stable unitized regenerative fuel cells (urfcs) for long-term energy storage10.1039/D0EE03244A ↗
28. Low-loading iro2 supported on pt for catalysis of pem water electrolysis and regenerative fuel cells10.1016/j.apcatb.2020.118955 ↗
29. Polymer electrolyte membrane unitized regenerative fuel cells: Operational considerations for achieving high round trip efficiency at low catalyst loading10.1016/j.apcatb.2021.120458 ↗
30. A low temperature unitized regenerative fuel cell realizing 60% round trip efficiency and 10000 cycles of durability for energy storage applications10.1039/C9EE03626A ↗
31. Ionomer content in the catalyst layer of polymer electrolyte membrane fuel cell (pemfc): Effects on diffusion and performance10.1016/j.ijhydene.2010.11.076 ↗
32. The effects of nafion® ionomer content in pemfc meas prepared by a catalyst-coated membrane (ccm) spraying method10.1016/j.ijhydene.2009.11.058 ↗
33. Dependence of optimum nafion content in catalyst layer on platinum loading10.1016/j.jpowsour.2003.12.060 ↗
34. Pemfc electrode preparation by electrospray: optimization of catalyst load and ionomer content10.1016/j.cattod.2008.12.003 ↗
35. Investigations on high performance proton exchange membrane water electrolyzer10.1016/j.ijhydene.2008.11.022 ↗
36. Influence of ionomer content in iro2/tio2 electrodes on pem water electrolyzer performance10.1149/2.0231611jes ↗
37. Investigation of the correlation effects of catalyst loading and ionomer content in an anode electrode on the performance of polymer electrode membrane water electrolysis10.1016/j.ijhydene.2022.04.019 ↗
38. Quantitative analysis of carbon corrosion during fuel cell start-up and shut-down by anode purging10.1016/j.jpowsour.2012.07.037 ↗
39. Analysis of inkjet printed catalyst coated membranes for polymer electrolyte electrolyzers10.1149/2.1101807jes ↗
40. Decoupling structure-sensitive deactivation mechanisms of ir/irox electrocatalysts toward oxygen evolution reaction10.1016/j.jcat.2019.01.018 ↗
41. Study of morphology and composition of pt-black catalysts iii. xps study of pt-black10.1016/0378-5963(83)90045-4 ↗
42. Inc · 2013
43. Refractive index of the propyleneglycol-water system from 15 to 50 °C10.1002/bscb.19760850801 ↗
44. Cooper · 2005
45. Estimating charge-transport properties of fuel-cell and electrolyzer catalyst layers via electrochemical impedance spectroscopy10.1016/j.electacta.2020.137521 ↗
46. Design and characterization of bi-functional electrocatalytic layers for application in pem unitized regenerative fuel cells10.1016/j.ijhydene.2009.08.081 ↗
47. Effect of carbon black additive in pt black cathode catalyst layer on direct methanol fuel cell performance10.1016/j.ijhydene.2010.07.045 ↗
48. Improved polymer electrolyte membrane water electrolyzer performance by using carbon black as a pore former in the anode catalyst layer10.1016/j.jpowsour.2022.231629 ↗
49. Gas diffusion layer with titanium carbide for a unitized regenerative fuel cell10.1016/j.electacta.2010.07.103 ↗
50. Insights into interfacial and bulk transport phenomena affecting proton exchange membrane water electrolyzer performance at ultra-low iridium loadings10.1002/advs.202102950 ↗
51. Electro-analytical performance of bifunctional electrocatalyst materials in unitized regenerative fuel cell system10.1016/j.ijhydene.2018.08.035 ↗
52. Optimization of electrode structure to suppress electrochemical carbon corrosion of gas diffusion layer for unitized regenerative fuel cell10.1149/2.071406jes ↗