Characterizing degradation in lithium-ion batteries with pulsing
Source abstract
Abstract
Degradation in lithium-ion batteries is traditionally characterized with the pseudo open-circuit voltage (pOCV) or incremental capacity (IC) but these methods have hours-long diagnostics times and cannot easily measure impedance change. It is shown here that a pulse with amplitude 1 C-rate can perform both IC and impedance characterization in just 2 min. Pulses and C/20 pOCV from 6 lithium-ion cells at 1328 unique combinations of state of charge, state of health, and temperature are evaluated using the convolution-defined diffusion equivalent circuit model, ridge regression, and neural networks. Ridge regression of the IC extrema and the pulse harmonics predicts SoH and nominal SoC with less than 1% and 6% error, respectively. Individual contributions of the ohmic, charge transfer, and diffusion overpotentials, as well as open-circuit voltage or hysteresis, are quantified for the charge pulse. Neural networks reconstruct IC extrema from the pulse harmonics with less than 1% error. The pulse response therefore reflects internal kinetic parameters and electrode phase transitions which are best uncovered using neural networks. Our results extend the uses of pulsing and suggest novel methods for degradation diagnostics in battery management systems.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Battery stress factor ranking for accelerated degradation test planning using machine learning
2. Degradation of commercial lithium-ion cells as a function of chemistry and cycling conditions
3. Towards unified machine learning characterization of lithium-ion battery degradation across multiple levels: A critical review
4. Rate dependency of incremental capacity analysis (dQ/dV) as a diagnostic tool for lithium-ion batteries
5. Supervised learning of synthetic big data for Li-ion battery degradation diagnosis
6. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
7. Identify capacity fading mechanism in a commercial LiFePO4 cell10.1016/j.jpowsour.2009.05.036 ↗
8. Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part II. Degradation mechanism under 2 C cycle aging10.1016/j.jpowsour.2011.08.078 ↗
9. A parametric open circuit voltage model for lithium ion batteries10.1149/2.0331512jes ↗
10. Electrode ageing estimation and open circuit voltage reconstruction for lithium ion batteries10.1016/j.ensm.2021.02.018 ↗
11. Online health diagnosis of lithium-ion batteries based on nonlinear autoregressive neural network
12. Deep Gaussian process regression for lithium-ion battery health prognosis and degradation mode diagnosis
13. Reconstruction of the incremental capacity trajectories from current-varying profiles for lithium-ion batteries
14. Lithium ion battery degradation: what you need to know
15. Discrete-time modeling of Li-ion batteries with electrochemical overpotentials including diffusion
16. Novel metallic separator coupled composite phase change material passive thermal design for large format prismatic battery pack
17. Enhanced optimization algorithm for the structural design of an air-cooled battery pack considering battery lifespan and consistency10.1002/er.8700 ↗
18. Overpotential analysis of graphite-based Li-ion batteries seen from a porous electrode modeling perspective10.1016/j.jpowsour.2021.230345 ↗
19. Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation
20. A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as Li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems10.1016/j.jpowsour.2017.03.042 ↗
21. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling10.1016/j.jpowsour.2010.07.071 ↗
22. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗
23. Fast time-domain impedance spectroscopy of lithium-ion batteries using pulse perturbation
24. Health and performance diagnostics in Li-ion batteries with pulse-injection-aided machine learning
25. Predicting the impact of formation protocols on battery lifetime immediately after manufacturing10.1016/j.joule.2021.09.015 ↗
26. Interpretable real-time modelling of the diffusion overpotential in lithium batteries
27. State of charge dependency of the overvoltage generated in commercial Li-ion cells10.1016/j.jpowsour.2019.02.046 ↗
28. Prediction of overcharge-induced serious capacity fading in nickel cobalt aluminum oxide lithium-ion batteries using electrochemical impedance spectroscopy
29. Principles and applications of galvanostatic intermittent titration technique for lithium-ion batteries10.33961/jecst.2021.00836 ↗
30. Scatter search and local NLP solvers: A multistart framework for global optimization10.1287/ijoc.1060.0175 ↗