A method of lithium-ion battery failure diagnosis based on parameter boundaries of heterogeneous multi-physics aging model
Source abstract
Abstract
Lithium-ion batteries experience capacity fading during long-term operation, and they need to be replaced when reach a certain aging degree. However, it is difficult to measure a complete charge/discharge curve to obtain the capacity whether the battery is used for vehicle or energy storage. The aging state of the battery can only be judged according to the partial data of voltage and current based on the data-driven method, which is not reliable enough. In this work, a new method of battery failure diagnosis in terms of capacity fading is proposed based on the heterogeneous multi-physics aging model of lithium-ion batteries. The key parameters are obtained by parameter identification method, and the parameter boundaries when the battery is on the verge of failure are obtained by model driven method. In practical application of batteries, the failure of batteries can be diagnosed online by monitoring the key parameters, so that an early warning signal can be provided when the battery reaches the end of its life, which is of great significance to ensure that the battery can meet the performance and safety requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Reliability and Maintenance Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
2. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
3. A study of the relationship between coulombic efficiency and capacity degradation of commercial lithium-ion batteries10.1016/j.energy.2017.12.144 ↗
4. Post mortem analysis of ageing mechanisms in LiNi0.8Co0.15Al0.05O2 – LiNi0.5Co0.2Mn0.3O2 – LiMn2O4/graphite lithium ion batteries10.1016/j.jpowsour.2020.227915 ↗
5. Study on the reversible capacity loss of layered oxide cathode during low-temperature operation10.1016/j.jpowsour.2016.12.033 ↗
6. A physics-based aging model for lithium-ion battery with coupled chemical/mechanical degradation mechanisms10.1016/j.electacta.2021.139133 ↗
7. A novel model for lithium-ion battery aging quantitative analysis based on pseudo two-dimension expressions10.20964/2019.04.05 ↗
8. Quantitative estimation of turning point of ageing based on a two-stage model for lithium-ion batteries10.1149/1945-7111/ac4b1b ↗
9. Coupling lithium plating with SEI formation in a pseudo-3D model: a comprehensive approach to describe aging in lithium-ion cells10.1149/1945-7111/ac716a ↗
10. Safety boundary of power battery based on quantitative lithium deposition10.1016/j.est.2022.104789 ↗
11. An integrated method of the future capacity and RUL prediction for lithium-ion battery pack10.1109/TVT.2021.3138959 ↗
12. A multi-scale heterogeneous electrochemical-diffusion-induced stress coupling model for lithium-ion batteries10.1149/1945-7111/ac964d ↗
13. Battery cycle life prediction with coupled chemical degradation and fatigue mechanics10.1149/2.049210jes ↗
14. A single particle model with chemical/mechanical degradation physics for lithium ion battery State of Health (SOH) estimation10.1016/j.apenergy.2018.01.011 ↗
15. TL · 2005
16. A parameter estimation method for a simplified electrochemical model for Li-ion batteries10.1016/j.electacta.2018.04.098 ↗
17. An electrochemical model for high C-rate conditions in lithium-ion batteries10.1016/j.jpowsour.2019.226885 ↗
18. An approximate solution for electrolyte concentration distribution in physics-based lithium-ion cell models10.1016/j.microrel.2012.11.002 ↗
19. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
20. Threefold increase in the young's modulus of graphite negative electrode during lithium intercalation10.1149/1.3327913 ↗
21. Elastic properties of lithium cobalt oxide (LiCoO2)10.1016/j.jascer.2017.03.001 ↗
22. Elastic properties of olivine LixFePO4 from first principles10.1103/PhysRevB.73.174112 ↗