Multimodal assessment of mechanically induced transformation in metastable multi‐phase steel using X‐ray nano‐tomography and pencil‐beam diffraction tomography
Source abstract
Abstract
A combination of X-ray nano-tomography and pencil-beam diffraction tomography was utilized for multimodal assessment of the mechanically induced transformation of individual retained austenite grains during tensile deformation in a 0.1C-5Mn-1Si multi-phase steel. In the present study, a newly developed high energy (20 - 30 keV) and high resolution (spatial resolution of 0.16 µm in this study) X-ray nano-tomography technique was applied for the first time to the in-situ observation of a steel under external loading. The gradual transformation, plastic deformation, and rotation behaviour of the individual austenite grains were clearly observed in 3D. It was revealed that the early stage of the transformation was dominated by the stress-assisted transformation that can be associated with measured mechanical driving force, whilst the overall transformation was dominated by the strain-induced transformation that is interrelated with measured dislocation multiplication. The transformation behaviour of individual grains was classified according to their initial crystallographic orientation and size. Noteworthy was the high stability of coarse austenite grains (i.e., 2.5 μm or larger in diameter), contrary to past reports in the literature. Characteristic rotation behaviour and wide data dispersion were also observed in the case of the individual austenite grains. It was conclusively demonstrated that such characteristic behaviour partly originated from interactions with surrounding soft and hard phases. The origins of these characteristics are discussed by combining the image-based and diffraction-based information.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Surface Polishing Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Persistent challenges to advanced high strength steel implementation
2. Strain rate effect on tensile flow behavior and anisotropy of a medium manganese TRIP steel10.1007/s11837-018-2830-3 ↗
3. Development of a lightweight third-generation advanced high-strength steel (3GAHSS) vehicle body structure10.4271/2018-01-1026 ↗
4. The modeling of retained austenite in low-alloyed TRIP steels10.1007/BF02914354 ↗
5. Modelling of austenite stability in low-alloy triple-phase steels10.1002/srin.199605529 ↗
6. Nanoscale solute partitioning and carbide precipitation in a multiphase TRIP steel analyzed by atom probe tomography10.1007/s11837-018-2974-1 ↗
7. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel10.1016/j.actamat.2011.03.025 ↗
8. The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel10.1016/j.actamat.2014.07.005 ↗
9. Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel10.2355/isijinternational1966.27.570 ↗
10. Effects of volume fraction and stability of retained austenite on formability in a 0.1C–1.5Si–1.5Mn–0.5Cu TRIP-aided cold-rolled steel sheet10.1016/S0921-5093(03)00035-2 ↗
11. Bainitic stabilization of austenite in low alloy sheet steels
12. Effects of second phase morphology on retained austenite morphology and tensile properties in a trip-aided dual-phase steel sheet10.2355/isijinternational.33.775 ↗
13. Multiscale mechanics of TRIP-assisted multiphase steels10.1016/j.actamat.2007.02.029 ↗
14. Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steels10.1007/s11661-006-0157-0 ↗
15. Austenite stability and deformation behaviour in a cold-rolled transformation-induced plasticity steel with medium manganese content10.1016/j.actamat.2014.10.052 ↗
16. Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels10.1016/j.msea.2014.07.099 ↗
17. Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels10.1007/s11661-006-0213-9 ↗
18. Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels10.1016/j.actamat.2012.12.010 ↗
19. Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel10.1016/j.actamat.2011.11.026 ↗
20. Effect of microstructure on retained austenite stability and work hardening of TRIP steel10.1016/j.msea.2011.02.032 ↗
21. In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures10.1016/j.actamat.2008.03.026 ↗
22. Analysis of the martensitic transformation at various scales in TRIP steel10.1016/j.msea.2003.10.372 ↗
23. A study of the carbon distribution in retained austenite10.1016/j.scriptamat.2006.11.033 ↗
24. Internal stresses and carbon enrichment in austenite of quenching and partitioning steels from high energy X-ray diffraction experiments10.1016/j.msea.2017.10.105 ↗
25. Advanced micromechanical model for transformation-induced plasticity steels with application of in-situ high-energy x-ray diffraction method10.1007/s11661-008-9649-4 ↗
26. Poulsen · 2004
27. Diffraction-amalgamated grain boundary tracking for mapping 3D crystallographic orientation and strain fields during plastic deformation10.1016/j.actamat.2016.01.072 ↗
28. Martensitic transformation of individual grains in low-alloyed TRIP steels10.1016/j.scriptamat.2006.10.041 ↗
29. Grain boundary tracking: a four-dimensional visualization technique for determining grain boundary geometry via local strain mapping10.1016/j.actamat.2013.06.013 ↗
30. Damage micromechanisms in dual-phase steel investigated with combined phase- and absorption-contrast tomography10.1016/j.actamat.2017.01.010 ↗
31. High-energy x-ray nanotomography introducing an apodization Fresnel zone plate objective lens10.1063/5.0020293 ↗
32. Experimental determination of the stability of retained austenite in low alloy TRIP steels10.1002/srin.199905668 ↗
33. Toda · 2021
34. Adaptive thresholding using the integral image10.1080/2151237X.2007.10129236 ↗
35. Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysis10.1016/S1359-6454(98)00001-9 ↗
36. In situ local measurement of austenite mechanical stability and transformation behavior in third-generation advanced high-strength steels10.1007/s11661-018-4660-x ↗
37. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
38. Bhadeshia · 2006
39. Lath and butterfly composite martensite microstructure of a medium-carbon steel and its quantitative evaluation10.2355/isijinternational.ISIJINT-2018-152 ↗
40. Analysis of tensile deformation behaviour by in situ neutron diffraction experiments10.2355/tetsutohagane.TETSU-2019-014 ↗
41. Multiscale mechanics of TRIP-assisted multiphase steels: II. Micromechanical modelling10.1016/j.actamat.2007.02.015 ↗
42. Thermodynamics-based alloy design criteria stabilization and transformation toughening in system10.1016/0925-8388(94)06015-0 ↗
43. Martensitic transformation of retained austenite in ferrite matrix for low alloy steel10.2320/matertrans.M2017330 ↗
44. Lean duplex trip steel: role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning10.1016/j.mtla.2020.100952 ↗
45. Effect of grain refinement on thermal stability of metastable austenitic steel10.2320/matertrans.45.2245 ↗
46. Quantitative analysis of variant selection in ausformed lath martensite10.1016/j.actamat.2011.11.018 ↗
47. Nanoindentation investigation on the mechanical stability of individual austenite grains in a medium-Mn transformation-induced plasticity steel10.1016/j.scriptamat.2013.03.030 ↗