journal article·2023-03

Fast and safe heating-up control of a planar solid oxide cell stack: A three-dimensional model-in-the-loop study

Yingtian Chi, Peiyang Li, Jin Lin, Jiarong Li, Shujun Mu, Yonghua Song

Publisher page

Abstract

A fast heating-up rate generally conflicts with the temperature homogeneity of solid oxide cell (SOC) stacks. This study designs an adaptive model predictive controller (MPC) to regulate the heating-up process of SOC stacks. The controller solves an optimization problem in real time to obtain optimal control that shortens the heating-up time by fully using the safety limit. The controller is verified with a three-dimensional (3D) hotbox–stack model calibrated with experiments. 3D model-in-the-loop (MiL) simulations show that the controller is effective under two heating modes despite of model deviations. Under the electrical heating mode, the controller achieves a 33% acceleration compared with a reference control strategy. Comparisons of electrical and gas heating reveal that the former is 63% faster but the latter consumes 41.6% less energy if the waste heat is fully recovered. The hotbox heat capacity is a major limiting factor for the heating-up process, particularly under the gas heating mode. An 80% reduction in the hotbox heat capacity, which can be achieved by reducing the thickness of the insulation layer, improves the heating-up time and the net energy consumption by 69% and 65% under the gas heating mode, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced ceramic materials synthesis · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. A comprehensive review on high-temperature fuel cells with carbon capture10.1016/j.apenergy.2020.115342 ↗
2. Reversible solid-oxide cell stack based power-to-x-to-power systems: Comparison of thermodynamic performance10.1016/j.apenergy.2020.115330 ↗
3. Bypassing renewable variability with a reversible solid oxide cell plant10.1016/j.apenergy.2018.02.115 ↗
4. Heat up impact on thermal stresses in SOFC for mobile APU applications: Thermo-structural analysis
5. Reduced-order transient thermal modeling for SOFC heating and cooling10.1016/j.jpowsour.2005.11.072 ↗
6. Progress in macro scale mechanical effects investigation of solid oxide fuel cells
7. The optimal heat-up strategy of solid-oxide fuel cells10.1149/1.2729036 ↗
8. Numerical study of a planar solid oxide fuel cell during heat-up and start-up operation10.1021/ie100783g ↗
9. Transient simulation of failures during start-up and power cut of a solid oxide fuel cell system using multiphysics modeling
10. The analyses of the heat-up process of a planar, anode-supported solid oxide fuel cell using the dual-channel heating strategy10.1016/j.ijhydene.2011.02.129 ↗
11. On the start-up transient simulation of a turbo fuel cell system10.1016/j.jpowsour.2006.02.030 ↗
12. Start-up characteristics of segmented-in-series tubular SOFC power modules improved by catalytic combustion at cathodes10.1002/fuce.201400014 ↗
13. Numerical analysis of start-up operation of a tubular solid oxide fuel cell10.1016/j.ijhydene.2008.11.034 ↗
14. A 3D CFD model for predicting the temperature distribution in a full scale APU SOFC short stack under transient operating conditions10.1016/j.apenergy.2014.08.052 ↗
15. Heat-up and start-up modeling of direct internal reforming solid oxide fuel cells10.1016/j.jpowsour.2009.12.021 ↗
16. Thermo-mechanical analysis of 3D manufactured electrodes for solid oxide fuel cells10.1016/j.jeurceramsoc.2020.09.004 ↗
17. Evaluation of the residual stress for anode-supported SOFCs10.1016/j.jpowsour.2003.11.049 ↗
18. A numerical tool to estimate SOFC mechanical degradation: Case of the planar cell configuration10.1016/j.jeurceramsoc.2007.12.025 ↗
19. Investigation of temperature distribution and performance of SOFC short stack with/without machined gas channels10.1016/j.ijhydene.2016.02.045 ↗
20. Parameters and their impacts on the temperature distribution and thermal gradient of solid oxide fuel cell10.1016/j.apenergy.2019.03.034 ↗
21. High spatial resolution temperature profile measurements of solid-oxide fuel cells10.1016/j.apenergy.2021.116633 ↗
22. A global thermo-electrochemical model for SOFC systems design and engineering10.1016/S0378-7753(03)00067-3 ↗
23. Steady state and transient thermal stress analysis in planar solid oxide fuel cells10.1016/j.jpowsour.2004.11.073 ↗
24. Parameter study on solid oxide fuel cell heat-up process to reaction starting temperature10.1007/s40684-019-00129-x ↗
25. Cathode temperature management during hybrid system startup
26. Equivalence ratio startup control of a fuel cell turbine hybrid system
27. Dynamic modeling and control design for a planar solid oxide fuel cell10.1149/05701.2705ecst ↗
28. Cold start control of solid oxide fuel cell-internal combustion engine system
29. A model-in-the-loop interface to emulate source dynamics in a zonal DC distribution system10.1109/TPEL.2004.842973 ↗
30. Model-in-the-loop testing
31. Model in the loop simulation of an electric propulsion system using virtual reality
32. A model-in-the-loop application of a predictive controller to a district heating system10.1016/j.egypro.2018.08.088 ↗
33. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 co-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
34. Computational model to predict thermal dynamics of planar solid oxide fuel cell stack during start-up process10.1016/j.jpowsour.2009.11.129 ↗
35. Experimental study of SOFC system heat-up without safety gases10.1016/j.ijhydene.2013.10.043 ↗
36. Thermal start-up behaviour and thermal management of SOFC’s10.1016/j.jpowsour.2005.10.052 ↗
37. Experimental analysis of a 25 kWe solid oxide fuel cell module for co-generation of hydrogen and power10.1149/09101.0159ecst ↗
38. Computational fluid dynamics analysis of an innovative start-up method of high temperature fuel cells using dynamic 3d model10.1515/pjct-2017-0010 ↗
39. 3D transient multiphysics modelling of a complete high temperature fuel cell system using coupled CFD and FEM10.1016/j.ijhydene.2014.01.063 ↗
40. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
41. Wall-function method used to simplify the solid oxide fuel cell model10.1016/j.jpowsour.2021.230396 ↗
42. A novel multi-physics and multi-dimensional model for solid oxide fuel cell stacks based on alternative mapping of BP neural networks10.1016/j.jpowsour.2021.229784 ↗
43. Numerical simulation acceleration of flat-chip solid oxide cell stacks by data-driven surrogate cell submodels10.1016/j.jpowsour.2022.232255 ↗
44. Investigation of thermal control for different SOFC flow geometries10.1016/j.apenergy.2016.06.015 ↗
45. Temperature gradient control of a solid oxide fuel cell stack10.1016/j.jpowsour.2018.12.058 ↗
46. Fardadi · 2013 · 241
47. Cooperative control of a steam reformer solid oxide fuel cell system for stable reformer operation10.3390/en15093336 ↗
48. Time-varying model predictive control of a reversible-SOC energy-storage plant based on the linear parameter-varying method10.1109/TSTE.2019.2932103 ↗
49. Thermal stress and thermo-electrochemical analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity10.1016/j.jpowsour.2009.10.011 ↗
50. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
51. Optimal control strategies for hydrogen production when coupling solid oxide electrolysers with intermittent renewable energies10.1016/j.jpowsour.2014.06.028 ↗
52. SOFC stacks for mobile applications with excellent robustness towards thermal stresses10.1016/j.ijhydene.2020.07.159 ↗
53. Quadratic programming methods for reduced hessian SQP10.1016/0098-1354(94)E0001-4 ↗
54. Cycling of three solid oxide fuel cell types10.1016/j.jpowsour.2007.01.029 ↗
55. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks10.1016/j.apenergy.2020.115899 ↗
56. Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000h10.1016/j.matlet.2013.08.025 ↗
57. Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs10.1016/j.ijhydene.2011.04.083 ↗
58. Influence of each sub-material on thermal conductivity of thermal insulation for ENE-FARM10.1149/08301.0031ecst ↗
59. Qi · 2022