Impacts of operating conditions on the recovery of proton exchange membrane fuel cells exposed to sulfur dioxide in an air stream
Source abstract
Abstract
Airborne SO 2 contaminants compromise the performance of proton exchange membrane fuel cells (PEMFCs) due to the formation of strongly adsorbed S-containing species, mainly S 0 , on the cathode Pt surface and a lack of self-recovery in pure air. To restore PEMFC performance, we applied voltage cycling from 0.1 to 1.2 V vs. the potential at the anode and with the H 2/N 2 gas configuration. This induced cyclic voltammetry (CV) procedure was examined for PEMFC performance recovery after 13–14 h of cathode exposure to 5 ppm SO 2 under different conditions. It was determined that the efficiency of CV-induced recovery depended on the operating temperature and current during contamination. The method recovered 99% of the performance after exposure to SO 2 at 60 °C and a constant current of 0.6 A cm −2. An increase in the operating current and cell temperature favored the formation of strongly bonded S 0 and catalyst degradation, so the performance recovery reached 95% for 60 °C and 1.0 A cm −2, 90% for 80 °C and 0.6 A cm −2, and 84% for 80 °C and 1.0 A cm −2. The PEMFC performance after exposure to SO 2 at high temperature could not be fully recovered by the CV-induced method and seemed to require additional or modified procedures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Direct hydrogen fuel cell electric vehicle cost analysis: system and high-volume manufacturing description, validation, and outlook10.1016/j.jpowsour.2018.07.100 ↗
2. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
3. Reviews on the effects of contaminations and research methodologies for PEMFC10.1016/j.ijhydene.2020.06.145 ↗
4. Poisoning of proton exchange membrane fuel cells by contaminants and impurities: review of mechanisms, effects, and mitigation strategies10.1016/j.jpowsour.2019.03.097 ↗
5. The effects of battlefield contaminants on PEMFC performance10.1016/S0378-7753(99)00341-9 ↗
6. Influence of air impurities on the performance of nanostructured PEMFC catalysts
7. Effect of selected airborne contaminants on PEMFC performance10.1149/2.057403jes ↗
8. Cell performance distribution in a low-temperature proton exchange membrane fuel cell stack during propene contamination10.1007/s10800-015-0896-y ↗
9. Effects of contaminants of catalyst activity
10. The effect of common airborne impurities and mixtures on PEMFC performance and durability10.1149/06403.0773ecst ↗
11. Influence of urban air on PEMFC vehicles – Long term effects of air contaminants in an authentic driving cycle10.1016/j.jpowsour.2018.08.063 ↗
12. Sensitivity analyses on the impact of air contaminants on automotive fuel cells10.1002/fuce.201500159 ↗
13. Study of acetylene poisoning of Pt cathode on proton exchange membrane fuel cell spatial performance using a segmented cell system10.1016/j.jpowsour.2015.04.073 ↗
14. Study of acetonitrile poisoning of Pt cathode on proton exchange membrane fuel cell spatial performance using a segmented cell system10.1016/j.jpowsour.2015.06.013 ↗
15. Study of the aromatic hydrocarbons poisoning of platinum cathodes on proton exchange membrane fuel cell spatial performance using a segmented cell system10.1016/j.jpowsour.2016.09.165 ↗
16. Spatial proton exchange membrane fuel cell performance under bromomethane poisoning10.1016/j.jpowsour.2016.12.046 ↗
17. Effects of propylene, methyl methacrylate and isopropanol poisoning on spatial performance of a proton exchange membrane fuel cell10.1016/j.jpowsour.2017.12.038 ↗
18. Poisoning effects of SO2 in an air stream on spatial PEMFC performance10.1016/j.jpowsour.2019.226949 ↗
19. Study of degradation and spatial performance of low Pt-loaded proton exchange membrane fuel cells under exposure to sulfur dioxide in an oxidant stream10.1016/j.jpowsour.2020.228032 ↗
20. Spatial performance of high- and low-Pt loaded proton exchange membrane fuel cells under exposure to nitrogen dioxide10.1016/j.jpowsour.2021.229657 ↗
21. Effect of air contaminants on electrolyte degradation in PEMFC10.1149/1.3210634 ↗
22. The impact of air contaminants on PEMFC performance10.1016/j.jpowsour.2007.12.091 ↗
23. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
24. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
25. Diagnosis of contamination introduced by ammonia at the cathode in a PEMFC10.1016/j.ijhydene.2012.05.125 ↗
26. Spatial and temporal variations in atmospheric VOCs, NO2, SO2 and O3 concentrations at heavy industrialized region in Western Turkey and assessment of the carcinogenic risk levels of benzene10.1016/j.atmosenv.2014.12.031 ↗
27. Environmental quality of urban parks and open spaces in Hong Kong10.1007/s10661-005-8039-2 ↗
28. Volcanic air pollution over the Island of Hawaii: emissions, dispersal and composition. Association with respiratory symptoms and lung function in Hawaii Island school children10.1016/j.envint.2016.03.025 ↗
29. Impact of SO2 on the oxygen reduction reaction at Pt/Vulcan carbon electrocatalysts10.1149/1.2736648 ↗
30. Effect of SO2 on the performance of the cathode of a PEM fuel cell at 0.5-0.7 V10.1149/1.3236650 ↗
31. Potential dependence of SO2 poisoning and oxidation at the cathode of PEMFCs10.1016/j.jpowsour.2008.10.103 ↗
32. Mitigation studies of sulfur contaminated electrodes for PEMFC10.1016/j.ijhydene.2014.06.011 ↗
33. Two-stage degradation of PEMFC performance due to sulfur dioxide contamination10.1149/1.3484654 ↗
34. Influence of SO2 concentration and relative humidity on electrode poisoning in PEMFC10.1299/jtst.7.619 ↗
35. Sulphur dioxide poisoning and recovery of Pt nanoparticles: effect of particle size10.1016/S1452-3981(23)16521-7 ↗
36. The multiprocess degradation of PEMFC performance due to SO2 contamination and its recovery10.1149/1.3247546 ↗
37. Influence of cell temperature on sulfur dioxide contamination in proton exchange membrane fuel cells10.1016/j.jpowsour.2013.08.054 ↗
38. Products of SO2 adsorption on fuel cell electrocatalysts by combination of sulfur K-edge XANES and electrochemistry10.1021/la2033466 ↗
39. Effect of potential on sulfur-poisoning of Pt/C catalyst10.1149/1.2981918 ↗
40. Adsorption and oxidation of sulphur and of sulphur dioxide at the platinum electrode10.1016/S0022-0728(71)80162-6 ↗
41. The nature of species adsorbed on Pt from SO2 solutions
42. Two forms of chemisrbed sulfur on Pt and related species10.1016/S0022-0728(79)80374-5 ↗
43. The mechanism of the electrochemical oxidation of SO2 in sulfuric acid solutions10.1016/S0022-0728(79)80219-3 ↗
44. An in situ infrared study of the oxidation of sulfur dioxide on platinum electrodes10.1016/0022-0728(87)85220-8 ↗
45. Charactirization of sulfur layers from reduced sulfur dioxide on porous platinum black/Teflon electrodes10.1016/0022-0728(88)85060-5 ↗
46. Mitigation studies of sulfur contaminated electrodes for PEMFC10.1016/j.ijhydene.2014.06.011 ↗
47. Operational performance recovery of SO2 contaminated PEMFCs10.1149/1.3483108 ↗
48. Recovery of polymer electrolyte fuel cell exposed to sulfur dioxide10.1016/j.ijhydene.2016.01.077 ↗
49. Systematic study of back pressure and anode stoichiometry effects on spatial PEMFC performance distribution10.1016/j.electacta.2011.07.058 ↗
50. A segmented cell approach for studying the effects of serpentine flow field parameters on PEMFC current distribution10.1016/j.electacta.2012.10.103 ↗
51. Study of low concentration CO poisoning of Pt anode in a proton exchange membrane fuel cell using spatial electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.06.146 ↗
52. Impedance plane display of a reaction with an adsorbed intermediate10.1016/S0022-0728(72)80477-7 ↗
53. AC impedance of faradaic reactions involving electrosorbed intermediates – I. Kinetic theory10.1016/0013-4686(87)80005-1 ↗
54. On the impedance plane displays for irreversible electrode reactions based on the stability conditions of the steady-state. I. One state variable besides electrode potential10.1016/0013-4686(90)90077-D ↗
55. Calculation, simulation and interpretation of electrochemical impedances. Part 3. Conditions for observation of low frequency inductive diagrams for a two-step electron transfer reaction with an adsorbed intermediate species10.1016/0022-0728(92)80500-4 ↗
56. Deactivation of Pt/VC proton exchange membrane fuel cell cathodes by SO2, H2S and COS10.1016/j.jpowsour.2008.11.072 ↗
57. Effects of potential on SO2 adsorption onto Pt/C catalyst for PEMFCs10.1149/1.3655700 ↗
58. Anderson · 1975 · 246
59. Dissolution of platinum single crystals in acid medium10.1002/cphc.201900866 ↗
60. Resolving sulfur oxidation and removal from Pt and Pt3Co electrocatalysts using in situ X-ray adsorption spectroscopy10.1021/jp101977g ↗
61. Sulfur-induced faceting of platinum catalyst particles10.1038/323792a0 ↗
62. Investigation into the competitive and site-specific nature of anion adsorption on Pt using in situ X-ray adsorption spectroscopy10.1021/jp8067359 ↗
63. Voltammetric behaviour of irreversibly adsorbed SO2 on a Pt (111) electrode in sulphuric acid medium10.1016/0022-0728(93)03261-M ↗
64. Structure of chemisorbed sulfur on a Pt (111) electrode10.1021/ja962637h ↗
65. Chemistry of sulfur oxides on transition metals. II. Thermodynamics of sulfur oxides on platinum (111)10.1021/jp035306h ↗
66. The impact of SO2 on the degradation of MEA components in PEMFCs10.1149/1.3502349 ↗