Effect of Ni–GDC anode thickness by Co-sputtering on the high-performance thin film solid oxide fuel cells on a nanoporous substrate for low-temperature operation
Source abstract
Abstract
Thin film solid oxide fuel cells (TF–SOFCs) having Ni–GDC anodes with different thicknesses of (1–5) μm were fabricated on a nanoporous substrate termed anodic aluminum oxide (AAO) for low-temperature operation. By combining the co-sputtering method and the glancing angle deposition method, an ideal anode nanostructure with excellent porosity and electrical conductivity was successfully deposited. The cell showed a high performance of 494.9 mW/cm 2 at 500 °C having a three μm thick anode. Proper balancing of electronic property and ionic property of the anode results in improved performance of 40.1% over the previously reported cells of similar architectures. Structural, chemical, and electrochemical analyses unveiled the correlation between the electrochemical performance and the anode thin film structure. In particular, the electronic and ionic characteristics of the anode were separated and intensively analyzed with the help of additional methods such as 4-probe sheet resistance measurement and the distribution of relaxation time process with electrochemical impedance spectroscopy data. Through this, the influences of anode thin film thickness on electrical conductivity and fuel diffusion at the nanostructured anode and further on each resistance characteristic were identified, and its comprehensive understanding was gained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. O'Hayre · 2016
2. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
3. Achieving high mechanical-strength CH4-based SOFCs by low-temperature sintering (1100 °C)10.1016/j.ijhydene.2019.11.100 ↗
4. The influence of current density on the electrocatalytic activity of oxide-based direct hydrocarbon SOFC anodes10.1149/1.2976773 ↗
5. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
6. Role of nanostructures on SOFC performance at reduced temperatures10.1557/mrs.2014.193 ↗
7. Thin film solid oxide fuel cells operating below 600°C: a review10.1007/s40684-018-0047-0 ↗
8. Degradation mechanism of scandia-stabilised zirconia electrolytes: discussion based on annealing effects on mechanical strength, ionic conductivity, and Raman spectrum10.1016/j.ssi.2009.09.001 ↗
9. Nickel depletion and agglomeration in SOFC anodes during long-term operation10.1002/fuce.201600220 ↗
10. Solid oxide fuel cell: materials for anode, cathode and electrolyte10.1016/j.ijhydene.2019.11.234 ↗
11. Comparison of solid oxide fuel cell (SOFC) electrolyte materials for operation at 500 °C10.1016/j.ssi.2019.115138 ↗
12. Advances beyond traditional SOFC cell designs10.1016/j.ijhydene.2015.01.155 ↗
13. Three dimensional YSZ interface engineering layer for enhancement of oxygen reduction reactions of low temperature solid oxide fuel cells10.1016/j.ceramint.2020.02.030 ↗
14. Impact of nanostructured anode on low-temperature performance of thin-film-based anode-supported solid oxide fuel cells10.1016/j.jpowsour.2016.03.055 ↗
15. Effect of plasma-enhanced atomic layer deposited YSZ inter-layer on cathode interface of GDC electrolyte in thin film solid oxide fuel cells10.1016/j.renene.2018.11.021 ↗
16. Enhanced performance of nanostructured thin film anode through Pt plasma enhanced atomic layer deposition for low temperature solid oxide fuel cells10.1016/j.ijhydene.2020.03.158 ↗
17. Slurry spin coating of thin film yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolytes for solid oxide fuel cells10.1016/j.jpowsour.2016.07.080 ↗
18. Tailoring 3D structured nanofibrous nickel/gadolinium-doped ceria anodes for high-performance thin-film solid oxide fuel cells10.1016/j.jpowsour.2022.231320 ↗
19. Nanoporous nickel thin film anode optimization for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2021.08.138 ↗
20. Effects of accelerated degradation on metal supported thin film-based solid oxide fuel cells10.1039/C7TA11091J ↗
21. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells10.1021/cm070913t ↗
22. Effects of microstructure of Ni anode on nanotemplate based low temperature solid oxide fuel cells10.1007/s12541-019-00307-6 ↗
23. Nano-ceramic cathodes via Co-sputtering of Gd-Ce alloy and lanthanum strontium cobaltite for low-temperature thin-film solid oxide fuel cells10.1021/acsaem.0c01147 ↗
24. Atomic layer deposition of yttria-stabilized zirconia thin films for enhanced reactivity and stability of solid oxide fuel cells10.1016/j.energy.2016.09.094 ↗
25. Strength of an electrolyte supported solid oxide fuel cell10.1016/j.jpowsour.2015.07.075 ↗
26. Fabrication of the large area thin-film solid oxide fuel cells10.1016/j.cirp.2014.03.065 ↗
27. Effect of microstructure control of thin film yttria stabilized zirconia electrolyte for solid oxide fuel cells by adjusting oblique angle and target substrate distance of sputtering process10.1149/09101.1097ecst ↗
28. The potential and challenges of thin-film electrolyte and nanostructured electrode for yttria-stabilized zirconia-base anode-supported solid oxide fuel cells10.1016/j.jpowsour.2013.08.072 ↗
29. A circular membrane for nano thin film micro solid oxide fuel cells with enhanced mechanical stability10.1039/C5EE02328A ↗
30. Au-coated lanthanum strontium cobalt ferrite cathode for lowering sheet resistance of a solid oxide fuel cell10.1007/s12541-019-00013-3 ↗
31. Progress in metal-supported solid oxide fuel cells: a review10.1016/j.jpowsour.2010.02.035 ↗
32. Multilayer tape casting of large-scale anode-supported thin-film electrolyte solid oxide fuel cells10.1016/j.ijhydene.2019.04.161 ↗
33. Multi-layer thin-film electrolytes for metal supported solid oxide fuel cells10.1016/j.jpowsour.2014.01.043 ↗
34. High performance anode-supported solid oxide fuel cell based on thin-film electrolyte and nanostructured cathode10.1039/c0ee00255k ↗
35. Three-dimensional nanostructured bilayer solid oxide fuel cell with 1.3 W/cm2 at 450 C10.1021/nl402661p ↗
36. A study on properties of yttrium-stabilized zirconia thin films fabricated by different deposition techniques10.1016/j.renene.2013.08.043 ↗
37. Nickel-based bilayer thin-film anodes for low-temperature solid oxide fuel cells10.1016/j.energy.2018.07.147 ↗
38. Optimization of current collection to reduce the lateral conduction loss of thin-film-processed cathodes10.1016/j.jpowsour.2012.12.059 ↗
39. Low-temperature, high-performance thin-film solid oxide fuel cells with tailored nano-column structures of a sputtered Ni anode10.1039/D0TA06255C ↗
40. Glancing angle deposition: fabrication, properties, and applications of micro- and nanostructured thin films10.1116/1.2764082 ↗
41. In situ reduction and oxidation of nickel from solid oxide fuel cells in a titan ETEM
42. Effect of nickel contents on the microstructure of mesoporous nickel oxide/gadolinium-doped ceria10.1142/S1793604713500550 ↗
43. Influence of a platinum functional layer on a Ni-Ce 0.9 Gd 0.1 O 1.95 anode for thin-film solid oxide fuel cells
44. Engineering of the electrode structure of thin film solid oxide fuel cells10.1016/j.tsf.2014.11.018 ↗
45. Characterization of thin film solid oxide fuel cells with variations in the thickness of nickel oxide-gadolinia doped ceria anode10.1007/s12541-016-0131-8 ↗
46. Thin-film solid oxide fuel cell with high performance at low-temperature10.1016/S0167-2738(96)00525-5 ↗
47. A perspective on DRT applications for the analysis of solid oxide cell electrodes10.1016/j.electacta.2020.136328 ↗
48. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells, Electrochim
49. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
50. A nanoporous substrate-based low temperature solid oxide fuel cell using a thin film Ni anode10.1016/j.tsf.2018.09.039 ↗
51. Scalable fabrication process of thin-film solid oxide fuel cells with an anode functional layer design and a sputtered electrolyte10.1016/j.ijhydene.2020.09.033 ↗
52. The relation of microstructure, materials properties and impedance of SOFC electrodes: a case study of Ni/GDC anodes10.3390/en13040987 ↗
53. Effect of nanostructured grains in co-sputtered Ni-GDC thin-film anode on methane conversion kinetics for low temperature solid oxide fuel cells operating on nearly dry methane10.1016/j.ceramint.2021.12.092 ↗
54. High-performance ultra-thin film solid oxide fuel cell using anodized-aluminum-oxide supporting structure10.1016/j.elecom.2014.07.008 ↗
55. Combinatorial deposition of a dense nano-thin film YSZ electrolyte for low temperature solid oxide fuel cells10.1039/c3ta11758h ↗
56. Effect of nano-pinholes within ceramic electrolytes of thin-film solid oxide fuel cells10.1016/j.jiec.2019.03.008 ↗
57. SOFC modeling and parameter identification by means of impedance spectroscopy
58. Impedance spectroscopy study of an SDC-based SOFC with high open circuit voltage10.1016/j.electacta.2014.11.065 ↗
59. Comparison of solid oxide fuel cell (SOFC) electrolyte materials for operation at 500 °C10.1016/j.ssi.2019.115138 ↗
60. Effect of the ionic conductivity of the electrolyte in composite SOFC cathodes10.1149/1.3581109 ↗
61. Transport properties of solid oxide electrolyte ceramics: a brief review10.1016/j.ssi.2004.06.015 ↗
62. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
63. Electrode activation and passivation of solid oxide fuel cell electrodes10.1002/fuce.200500111 ↗
64. Towards understanding the impedance response of Ni/YSZ anodes10.1149/1.2729240 ↗
65. Effect of anode thickness on polarization resistance for metal-supported microtubular solid oxide fuel cells10.1149/2.0431704jes ↗