journal article·2022-10

Mechanism of silicon fragmentation in all-solid-state battery evaluated by discrete element method

Magnus So, Shinichiro Yano, Agnesia Permatasari, Thi Dung Pham, Kayoung Park, Gen Inoue

Publisher page

Abstract

Silicon (Si) alloy provides a high charge capacity as the active material (AM) in anodes of all-solid-state batteries (ASSBs); however, it may expand by up to 300% during charging, which causes capacity losses associated with fragmentation and contact losses. Herein, a simulation framework including fabrication and intercalation of Si anode in an ASSB using the discrete element method (DEM) is proposed. AM particles were simulated as pre-aggregated primary particles. The Li distribution within the AM particles in the intercalation simulation was obtained by calculating the diffusion of Li between primary particles. The damage inflicted on both AM and solid electrolyte (SE) during intercalation expansion was determined by calculating breakage of fusion bonds. Diffusion limitation caused uneven expansion of AM particles, resulting in high stress and breakage of AM aggregates. The simulation was performed with different stack pressure, C-rate, and AM fraction values. Structural properties such as porosity and the AM–SE contact area were significantly affected by stack pressure. Moreover, C-rate had a significant impact on Li concentration gradient and damage to AM particles because of diffusion limitation. This study provides insights on interactions between reaction, diffusion, intercalation expansion, and damage in ASSBs and the development of improved battery designs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Paoli · 2022
2. 2019
3. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
4. A sodium-ion sulfide solid electrolyte with unprecedented conductivity at room temperature10.1038/s41467-019-13178-2 ↗
5. High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes10.1038/s41560-021-00952-0 ↗
6. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
7. Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes10.1126/science.abg7217 ↗
8. Alloy design for lithium-ion battery anodes10.1149/1.2752985 ↗
9. Anode properties of Si nanoparticles in all-solid-state Li batteries10.1021/acsaem.9b01517 ↗
10. Effects of volume variations under different compressive pressures on the performance and microstructure of all-solid-state batteries10.1016/j.jpowsour.2020.228595 ↗
11. In situ conductivity, impedance spectroscopy, and ex situ Raman spectra of amorphous silicon during the insertion/extraction of lithium10.1021/jp0729563 ↗
12. Nanocrystalline silicon embedded highly conducting phosphorus doped silicon thin film as high power lithium ion battery anode10.1016/j.electacta.2019.135318 ↗
13. The structural evolution and lithiation behavior of vacuum-deposited Si film with high reversible capacity10.1016/j.electacta.2008.03.017 ↗
14. Silicon-based anodes with long cycle life for lithium-ion batteries achieved by significant suppression of their volume expansion in ionic-liquid electrolyte10.1021/acsami.8b17123 ↗
15. On the interface design of Si and multilayer graphene for a high-performance Li-ion battery anode10.1021/acsami.0c13821 ↗
16. Visualization and control of chemically induced crack formation in all-solid-state lithium-metal batteries with sulfide electrolyte10.1021/acsami.0c18314 ↗
17. Operando visualization of morphological dynamics in all-solid-state batteries10.1002/aenm.201901547 ↗
18. Decrepitation model for capacity loss during cycling of alloys in rechargeable electrochemical systems10.1007/BF02375547 ↗
19. Cohesive modeling of crack formation in two-phase planar electrodes subject to diffusion induced stresses using the distributed dislocation method10.1016/j.ijmecsci.2020.106183 ↗
20. Phase field modeling of chemomechanical fracture of intercalation electrodes: role of charging rate and dimensionality10.1016/j.jmps.2019.103696 ↗
21. The effect of stress on battery-electrode capacity10.1149/2.0371704jes ↗
22. Bucci
23. Mechanical instability of electrode-electrolyte interfaces in solid-state batteries10.1103/PhysRevMaterials.2.105407 ↗
24. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes10.1021/acs.chemrev.0c00101 ↗
25. Comparative study on sulfide and oxide electrolyte interfaces with cathodes in all-solid-state battery via first-principles calculations10.1021/acsaem.0c02033 ↗
26. Enhancing the mechanical stability of composite electrodes by regulating the volume of active material using a prelithiation strategy10.1016/j.est.2022.104390 ↗
27. Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: a first-principles study10.1016/j.jpowsour.2010.04.044 ↗
28. Ex-situ depth-sensing indentation measurements of electrochemically produced Si–Li alloy films10.1016/j.elecom.2011.05.011 ↗
29. Cyclic steady states in diffusion-induced plasticity with applications to lithium-ion batteries10.1016/j.jmps.2017.12.003 ↗
30. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
31. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
32. Modeling the electrical conductive paths within all-solid-state battery electrodes10.1002/ceat.201900501 ↗
33. High active material loading in all-solid-state battery electrode via particle size optimization
34. Towards a 3D-resolved model of Si/Graphite composite electrodes from manufacturing simulations10.1016/j.jpowsour.2021.230486 ↗
35. Simulation of fabrication and degradation of all-solid-state batteries with ductile particles10.1149/1945-7111/abed23 ↗
36. Effect of mold pressure on compaction and ion conductivity of all-solid-state batteries revealed by the discrete element method10.1016/j.jpowsour.2021.230344 ↗
37. Simulation of the compaction of an all-solid-state battery cathode with coated particles using the discrete element method10.1016/j.jpowsour.2022.231279 ↗
38. Fischer-Cripps · 2007
39. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
40. Determination of the diffusion coefficient of lithium ions in nano-Si10.1016/j.ssi.2008.12.015 ↗
41. Impedance analysis of silicon nanowire lithium ion battery anodes10.1021/jp901594g ↗
42. Li-ion diffusion in amorphous Si films prepared by RF magnetron sputtering: a comparison of using liquid and polymer electrolytes10.1016/j.matchemphys.2009.11.031 ↗
43. Measurement of the diffusion rate of Li in silicon by the use of bipolar cells10.1016/j.jpowsour.2007.06.115 ↗
44. The lithiation process and Li diffusion in amorphous SiO2 and Si from first-principles10.1016/j.electacta.2019.135344 ↗
45. Mechanical and physical properties of LiNi0.33Mn0.33Co0.33O2 (NMC)10.1016/j.jeurceramsoc.2017.03.048 ↗
46. Compliant yet brittle mechanical behavior of Li2S–P2S5 lithium-ion-conducting solid electrolyte10.1002/aenm.201602011 ↗
47. Evaluation of elastic modulus of Li2S-P2S5 glassy solid electrolyte by ultrasonic sound velocity measurement and compression test10.2109/jcersj2.121.946 ↗