Interfacial optimization between cathode and 20 μm-thickness solid electrolyte membrane via in-situ polymerization for lithium metal batteries
Source abstract
Abstract
Solid electrolyte membranes face a huge challenge in achieving satisfactory interfacial contact with electrodes, which severely impairs the rate performance and cycle life of solid-state lithium batteries. In this work, we fabricated an ultrathin solid polymer electrolyte (SPE) membrane, and based on it we demonstrated the interfacial contact optimization strategy by in-situ polymerization. The free-stranding PVDF-HFP-LiTFSI membrane with a thickness of 20 μm shows an ionic conductivity of 1.2 × 10 −4 S cm −1 at room temperature. The poly(ethylene glycol) diacrylate-based in-situ polymerized electrolyte tightly connects the cathode and the SPE membrane, decreasing the interfacial resistance from 9380 Ω cm 2 to 1100 Ω cm 2. Compared with the traditional method employing liquid electrolyte for interfacial wetting, extended electrochemical window (4.6 V) and much improved thermal stability are obtained. Full cell employing LiFePO 4 cathode and lithium metal anode shows an initial capacity of 138.9 mAh g −1 under a charge/discharge rate of 0.5C (85 mA g −1) at 60 °C, with a capacity retention ratio of 84.9% and a high average Coulombic efficiency (98.7%) after 300 cycles, remarkably better than those of its liquid electrolyte-used counterpart. Our work demonstrates that the application of in-situ polymerization into interfacial contact improvement between SPE and cathode possesses wide application prospects.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Challenges and strategies towards practically feasible solid‐state lithium metal batteries10.1002/adma.202104666 ↗
2. Practical challenges and future perspectives of all-solid-state lithium-metal batteries
3. A review of composite polymer-ceramic electrolytes for lithium batteries10.1016/j.ensm.2020.10.006 ↗
4. Insights into the local structure, microstructure and ionic conductivity of silicon doped NASICON-type solid electrolyte Li1.3Al0.3Ti1.7P3O1210.1016/j.ensm.2021.10.003 ↗
5. Ultrathin, flexible polymer electrolyte for cost‐effective fabrication of all‐solid‐state lithium metal batteries10.1002/aenm.201902767 ↗
6. High performance composite polymer electrolytes for lithium‐ion batteries10.1002/adfm.202101380 ↗
7. Amphipathic binder integrating ultrathin and highly ion-conductive sulfide membrane for cell-level high-energy-density all-solid-state batteries10.1002/adma.202105505 ↗
8. Garnet-type solid-state electrolytes: materials, interfaces, and batteries10.1021/acs.chemrev.9b00427 ↗
9. Double-layer polymer electrolyte for high-voltage all-solid-state rechargeable batteries10.1002/adma.201805574 ↗
10. Ultrathin solid composite electrolyte based on Li6.4La3Zr1.4Ta0.6O12/PVDF-HFP/LiTFSI/succinonitrile for high-performance solid-state lithium metal batteries10.1021/acsaem.0c01872 ↗
11. Toward high performance all‐solid‐state lithium batteries with high‐voltage cathode materials: design strategies for solid electrolytes, cathode interfaces, and composite electrodes10.1002/aenm.202003154 ↗
12. Building better batteries in the solid state: a review10.3390/ma12233892 ↗
13. Investigation on the copolymer electrolyte of poly(1,3‐dioxolane‐co‐formaldehyde)10.1002/marc.202000047 ↗
14. The unusual conductivity of Na+ in PEO‐based statistical copolymer solid electrolytes: when less means more10.1002/anie.202109709 ↗
15. A highly elastic polysiloxane-based polymer electrolyte for all-solid-state lithium metal batteries10.1039/D1TA02689E ↗
16. Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate-based polymer electrolytes for solid-state Li batteries10.1002/pola.28080 ↗
17. Thiol‐branched solid polymer electrolyte featuring high strength, toughness, and lithium ionic conductivity for lithium‐metal batteries10.1002/adma.202001259 ↗
18. Polymer electrolyte with dual functional groups designed via theoretical calculation for all-solid-state lithium batteries10.1016/j.jpowsour.2019.227614 ↗
19. A flexible Dual-Ion battery based on PVDF-HFP-Modified gel polymer electrolyte with excellent cycling performance and superior rate capability10.1002/aenm.201801219 ↗
20. Gel polymer electrolyte based on PVDF-HFP matrix composited with rGO-PEG-NH2 for high-performance lithium ion battery10.1016/j.memsci.2020.118660 ↗
21. Ionic liquid based fluoropolymer solid electrolytes for lithium-ion batteries
22. PVDF-HFP based polymer electrolytes with high Li+ transference number enhancing the cycling performance and rate capability of lithium metal batteries10.1016/j.apsusc.2021.151593 ↗
23. Electrolyte and interface engineering for Solid-State sodium batteries10.1016/j.joule.2018.07.028 ↗
24. Air‐stable inorganic solid‐state electrolytes for high energy density lithium batteries: challenges, strategies, and prospects10.1002/inf2.12248 ↗
25. A metal-organic-framework-based electrolyte with nanowetted interfaces for high-energy-density solid-state lithium battery10.1002/adma.201704436 ↗
26. Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography10.1038/s41563-020-00903-2 ↗
27. Dendrites in solid‐state batteries: ion transport behavior, advanced characterization, and interface regulation10.1002/aenm.202003250 ↗
28. Unlocking the failure mechanism of solid state lithium metal batteries10.1002/aenm.202100748 ↗
29. Linking the defects to the formation and growth of li dendrite in all‐solid‐state batteries10.1002/aenm.202102148 ↗
30. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries10.1039/C8EE00540K ↗
31. Coupled crack propagation and dendrite growth in solid electrolyte of all-solid-state battery10.1016/j.nanoen.2021.106057 ↗
32. Solid‐state lithium metal batteries with extended cycling enabled by dynamic adaptive solid‐state interfaces10.1002/adma.202008084 ↗
33. In situ curing technology for dual ceramic composed by organic–inorganic functional polymer gel electrolyte for dendritic‐free and robust lithium–metal batteries10.1002/admi.202000830 ↗
34. Viscoelastic and nonflammable interface design–enabled dendrite‐free and safe solid lithium metal batteries10.1002/aenm.201803854 ↗
35. Facilitating interfacial stability via bilayer heterostructure solid electrolyte toward high‐energy, safe and adaptable lithium batteries10.1002/aenm.202000709 ↗
36. Cross-linked beta alumina nanowires with compact gel polymer electrolyte coating for ultra-stable sodium metal battery10.1038/s41467-019-11960-w ↗
37. Inorganic solid electrolytes for all‐solid‐state sodium batteries: fundamentals and strategies for battery optimization10.1002/adfm.202008165 ↗
38. Toward high energy density all solid‐state sodium batteries with excellent flexibility10.1002/aenm.201903698 ↗
39. An electron/ion dual‐conductive alloy framework for high‐rate and high‐capacity solid‐state lithium‐metal batteries10.1002/adma.201804815 ↗
40. Diffusion limitation of lithium metal and Li–Mg alloy anodes on LLZO type solid electrolytes as a function of temperature and pressure10.1002/aenm.201902568 ↗
41. Prevention of dendrite growth and volume expansion to give high-performance aprotic bimetallic Li-Na alloy–O2 batteries10.1038/s41557-018-0166-9 ↗
42. Stabilizing a lithium metal battery by an in situ Li2S-modified interfacial layer via Amorphous-Sulfide composite solid electrolyte10.1021/acs.nanolett.0c03395 ↗
43. Matchmaker of marriage between a Li metal anode and NASICON-structured solid-state electrolyte: plastic crystal electrolyte and three-dimensional host structure10.1021/acsami.0c12962 ↗
44. In situ construction of a LiF‐enriched interface for stable all‐solid‐state batteries and its origin revealed by cryo‐TEM10.1002/adma.202000223 ↗
45. Solidifying cathode–electrolyte interface for lithium–sulfur batteries10.1002/aenm.202000791 ↗
46. Polymer electrolytes for Lithium-Based batteries: advances and prospects
47. Facile design of sulfide‐based all solid‐state lithium metal battery: in situ polymerization within self‐supported porous argyrodite skeleton10.1002/adfm.202101523 ↗
48. SiO2 hollow nanosphere-based composite solid electrolyte for lithium metal batteries to suppress lithium dendrite growth and enhance cycle life10.1002/aenm.201502214 ↗
49. In-situ thermal polymerization boosts succinonitrile-based composite solid-state electrolyte for high performance Li-metal battery10.1016/j.jpowsour.2021.229861 ↗
50. In situ thermally polymerized solid composite electrolytes with a broad electrochemical window for all-solid-state lithium metal batteries10.1039/C9TA09969G ↗
51. In situ synthesis of a hierarchical all-solid-state electrolyte based on nitrile materials for high-performance lithium-ion batteries10.1002/aenm.201500353 ↗
52. Review-in situ polymerization for integration and interfacial protection towards solid state lithium batteries
53. Rechargeable lithium metal batteries with an in‐built solid‐state polymer electrolyte and a high voltage/loading ni‐rich layered cathode10.1002/adma.201905629 ↗
54. Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries10.1038/s41560-019-0349-7 ↗
55. In-situ polymerized solid-state electrolytes with stable cycling for Li/LiCoO2 batteries10.1016/j.nanoen.2021.106679 ↗
56. A flame-retardant polymer electrolyte for high performance lithium metal batteries with an expanded operation temperature10.1039/D1EE00049G ↗
57. A rational reconfiguration of electrolyte for high‐energy and long‐life lithium–chalcogen batteries10.1002/adma.202000302 ↗
58. In situ gel polymer electrolyte with inhibited lithium dendrite growth and enhanced interfacial stability for lithium-metal batteries10.1021/acsami.1c07032 ↗
59. In-Situ synthesized non-flammable gel polymer electrolyte enable highly safe and dendrite-free lithium metal batteries10.1016/j.cej.2021.128846 ↗
60. In situ polymerization process: an essential design tool for lithium polymer batteries10.1039/D0EE03527K ↗
61. Bacterial cellulose composite solid polymer electrolyte with high tensile strength and lithium dendrite inhibition for long life battery10.1002/eem2.12122 ↗
62. Ultrathin polymer-in-ceramic and ceramic-in-polymer bilayer composite solid electrolyte membrane for high-voltage lithium metal batteries10.1016/j.memsci.2021.119840 ↗
63. A comprehensive review of lithium salts and beyond for rechargeable batteries: progress and perspectives10.1016/j.mser.2018.07.001 ↗
64. Fluorine and lithium:ideal partners for high-performance rechargeable battery electrolytes
65. Improved ionic conductivity and Li dendrite suppression of PVDF-based solid electrolyte membrane by LLZO incorporation and mechanical reinforcement10.1007/s11581-020-03891-0 ↗
66. Solid-state polymer electrolytes with polypropylene separator-reinforced sandwich structure for room-temperature lithium ion batteries10.1016/j.memsci.2021.119713 ↗
67. Rapid ion transport induced by the enhanced interaction in composite polymer electrolyte for all-solid-state lithium-metal batteries10.1021/acs.jpclett.1c02701 ↗
68. Mastering high ion conducting of room-temperature all-solid-state lithium-ion batteries via safe phthaloyl starch-poly(vinylidene fluoride)-based polymer electrolyte10.1007/s11581-019-03309-6 ↗
69. Asymmetric polymer electrolyte constructed by metal–organic framework for solid‐state, dendrite‐free lithium metal battery10.1002/adfm.202007198 ↗
70. Solid-to-liquid transition of polycarbonate solid electrolytes in Li-metal batteries10.1016/j.jpowsour.2019.226852 ↗
71. Is it possible to obtain solvent‐free, Li+‐conducting solid electrolytes based on pure PVdF? Comment on"self‐suppression of lithium dendrite in all‐solid‐state lithium metal batteries with poly(vinylidene difluoride)‐based solid electrolytes10.1002/adma.201907375 ↗
72. Quasi‐ionic liquid enabling single‐phase poly(vinylidene fluoride)‐based polymer electrolytes for solid‐state LiNi0.6Co0.2Mn0.2O2||Li batteries with rigid‐flexible coupling interphase10.1002/smtd.202100262 ↗
73. Converting detrimental HF in electrolytes into a highly fluorinated interphase on cathodes10.1039/C8TA06150E ↗
74. Dual-functional electrolyte additives toward long-cycling lithium-ion batteries: ecofriendly designed carbonate derivatives10.1021/acsami.0c04372 ↗
75. The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge10.1016/S0378-7753(03)00149-6 ↗
76. An acetamide additive stabilizing ultra-low concentration electrolyte for long-cycling and high-rate sodium metal battery10.1016/j.ensm.2021.07.047 ↗
77. In situ observation of solid electrolyte interphase evolution in a lithium metal battery10.1038/s42004-019-0234-0 ↗
78. Behavior of solid electrolyte in Li-Polymer battery with NMC cathode via in-Situ scanning electron microscopy10.1021/acs.nanolett.9b04452 ↗
79. Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations10.1016/j.matt.2020.03.015 ↗
80. In situ scanning electron microscopy detection of carbide nature of dendrites in Li–polymer batteries10.1021/acs.nanolett.8b03148 ↗