journal article·2021-12Open access

Separation of the charge transfers and solid electrolyte interphase contributions to a battery voltage by modeling their non-linearities regarding current and temperature

Nicolas Damay, Karrick Mergo Mbeya, Guy Friedrich, Christophe Forgez

Abstract

Abstract One major aging phenomenon during the normal operation of a Li-ion battery is the thickening of its anode solid electrolyte interphase (SEI), which affects the battery state of health. However, the diagnosis of this SEI is difficult because its contribution to the battery voltage is mixed with those of other phenomena. In this article, a method is proposed to separate the contributions of charge transfers and anode SEI. It is based on EIS and GITT measurements and on a model of the charge transfers and SEI non-linearities regarding current and temperature, inspired by Butler–Volmer and Arrhenius equations. The proposed method is applied to a commercial LiFePO 4 /graphite cell. The activation energies of its SEI and charge transfers resistances are respectively 0.59 eV and 0.81 eV, which is in accordance with literature data. By construction, the method should be applicable to other battery chemistries, unless their cathode SEI has a significant resistive contribution. After an initial calibration, the proposed model can be embedded in a BMS. The latter may then be able to recalibrate the model online thanks to currents pulses at low temperatures and thus track the SEI growth of a battery during its entire operating life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
2. Model-based SEI layer growth and capacity fade analysis for EV and PHEV batteries and drive cycles10.1149/2.1161412jes ↗
3. Review—Recent advances and remaining challenges for lithium-ion battery cathodes10.1149/2.0351701jes ↗
4. Identifying contact resistances in high-voltage cathodes by impedance spectroscopy10.1149/2.0451904jes ↗
5. Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with li anode
6. Understanding the impedance spectrum of 18650 LiFePO4-cells10.1016/j.jpowsour.2012.12.020 ↗
7. A critical review of the li insertion mechanisms in LiFePO4 electrodes10.1149/2.029305jes ↗
8. Mesoscopic modeling of a LiFePO4 electrode: Experimental validation under continuous and intermittent operating conditions10.1149/2.0211706jes ↗
9. Dynamic modelling of lead/acid batteries using impedance spectroscopy for parameter identification10.1016/S0378-7753(97)02498-1 ↗
10. A physically meaningful equivalent circuit network model of a lithium-ion battery accounting for local electrochemical and thermal behaviour , variable double layer capacitance and degradation10.1016/j.jpowsour.2016.05.051 ↗
11. Using electrical analogy to describe mass and charge transport in lithium-ion batteries10.1016/j.jpowsour.2012.08.071 ↗
12. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
13. Estimation of state of charge, unknown nonlinearities, and state of health of a Lithium-Ion battery based on a comprehensive unobservable model10.1109/TIE.2013.2259779 ↗
14. Heterogeneous behavior modeling of a LiFePO4-graphite cell using an equivalent electrical circuit10.1016/j.est.2017.04.014 ↗
15. 1D electrochemical model of lithium-ion battery for a sizing methodology of thermal power plant integrated storage system10.3934/energy.2020.5.721 ↗
16. Modeling diffusive phenomena using non integer derivatives10.1051/epjap:2004009 ↗
17. Separation of charge transfer and contact resistance in LiFePO4-cathodes by impedance modeling10.1149/2.030207jes ↗
18. An analytical three-scale impedance model for porous electrode with agglomerates in lithium-ion batteries10.1149/2.0241504jes ↗
19. Thermal modeling of large prismatic LiFePO4/graphite battery . coupled thermal and heat generation models for characterization and simulation10.1016/j.jpowsour.2015.02.091 ↗
20. Devillers · 2013
21. Modelling Ni-MH battery using cauer and foster structures10.1016/j.jpowsour.2005.10.018 ↗
22. Mathematical modeling of commercial LiFePO4 electrodes based on variable solid-state diffusivity10.1149/2.073202jes ↗
23. A coupled nonlinear equivalent circuit – Thermal model for lithium ion cells10.1016/j.jpowsour.2012.11.044 ↗
24. Electronically conductive phospho-olivines as lithium storage electrodes.10.1038/nmat732 ↗
25. Electrochemical modeling of commercial LiFePO4 and graphite electrodes: Kinetic and transport properties and their temperature dependence10.1149/2.1151613jes ↗
26. Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries10.1016/S0167-2738(02)00064-4 ↗
27. Theory of SEI formation in rechargeable batteries: Capacity fade, accelerated aging and Lifetime prediction10.1149/2.044302jes ↗
28. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
29. Parameterization of a physico-chemical model of a lithium-ion battery: I. Determination of parameters10.1149/2.0541509jes ↗
30. Parameterization of linear equivalent circuit models over wide temperature and SOC spans for automotive lithium-ion cells using electrochemical impedance spectroscopy10.1016/j.est.2017.08.004 ↗
31. “Charge-transfer” process at graphite/electrolyte interface and the solvation sheath structure of Li+ in nonaqueous electrolytes10.1149/1.2536554 ↗
32. Distinguishing Li+ charge transfer kinetics at NCA/electrolyte and graphite/electrolyte interfaces, and NCA/electrolyte and LFP/electrolyte interfaces in li-ion cells10.1149/2.079205jes ↗
33. The effect of temperature on the electrochemical behavior of the V(IV)/V(V) couple on a graphite electrode10.1016/S1452-3981(23)18266-6 ↗