journal article·2021-12

Manipulating electrocatalytic activity of carbon architecture by supercritical carbon dioxide foaming and defect engineering for Li–S chemistry

Le Chen, Songlin Yu, Yaping Zhang, Yingze Song, Lixian Song

Publisher page

Abstract

Abstract Lithium–sulfur batteries (LSBs) have engendered extensive investigation interests owing to their remarkable theoretical capacity and energy density. Nevertheless, LSBs suffer from issues of fatal polysulfide (PS) shuttle and retarded sulfur redox reaction kinetics, impeding their real implementation. In this work, we report a delicate design of melamine formaldehyde resin-derived carbon architecture (CA) with manipulated electrocatalytic activity for Li–S chemistry by synergizing a versatile supercritical carbon dioxide (sc CO2) foaming technique and tailored defect engineering. The superior redox reaction kinetics for PSs afforded by the as-designed active CA resulting from the comprehensive management of hierarchical pore structure, surface area, nitrogen content and vacancy defect degree are demonstrated by our systematic electrochemical measurements and synchrotron X-ray three-dimensional nano-computed tomography (X-ray 3D nano-CT) results. As expected, the cathode shows a low decay of 0.06% per cycle at 1.0 C for 800 cycles. Impressively, even at a high sulfur loading of 9.3 mg cm−2 and a low electrolyte usage of 4.0 μL mgS−1, the cathode still delivers a remarkable specific capacity of 913.9 mA h g−1 as well as an outstanding retention of 86.3% at 0.1 C after 50 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Fuel Cells and Related Materials · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Lithium–sulfur batteries under lean electrolyte conditions: challenges and opportunities10.1002/anie.201909339 ↗
2. Conductive and catalytic triple-phase interfaces enabling uniform nucleation in high-rate lithium–sulfur batteries10.1002/aenm.201802768 ↗
3. Design, synthesis, and application of metal sulfides for Li–S batteries: progress and prospects10.1039/D0TA06220K ↗
4. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
5. Lithium–sulfur batteries: attaining the critical metrics10.1016/j.joule.2020.01.001 ↗
6. Elastic, Conductive coating layer for self-standing sulfur cathode achieving long lifespan Li–S batteries10.1002/aenm.201904026 ↗
7. Designing a highly efficient polysulfide conversion catalyst with paramontroseite for high-performance and long-life lithium–sulfur batteries10.1016/j.nanoen.2018.12.020 ↗
8. A review on the status and challenges of electrocatalysts in lithium–sulfur batteries10.1016/j.ensm.2019.04.038 ↗
9. 3D printing of a V8C7-VO2 bifunctional scaffold as an effective polysulfide immobilizer and lithium stabilizer for Li–S batteries10.1002/adma.202005967 ↗
10. Capacity retention of lithium sulfur batteries enhanced with nano-sized TiO2-embedded polyethylene oxide10.1039/C6TA10755A ↗
11. Novel MoSe2/MoO2 heterostructure as an effective sulfur host for high-performance lithium/sulfur batteries10.1016/j.cej.2019.122672 ↗
12. Elevated polysulfide regulation by an ultralight all-CVD-built ReS2@N-Doped graphene heterostructure interlayer for lithium–sulfur batteries10.1016/j.nanoen.2019.104190 ↗
13. Facile in situ nitrogen-doped carbon coated iron sulfide as green and efficient adsorbent for stable lithium–sulfur batteries10.1016/j.cej.2020.126462 ↗
14. Defective VSe2-graphene heterostructures enabling in situ electrocatalyst evolution for lithium–sulfur batteries10.1021/acsnano.0c05030 ↗
15. Ultrafine Co3Se4 nanoparticles in nitrogen-doped 3D carbon matrix for high-stable and long-cycle-life lithium sulfur batteries10.1002/aenm.201904273 ↗
16. Deciphering the modulation essence of p bands in Co-based compounds on Li–S chemistry10.1016/j.joule.2018.08.010 ↗
17. MOF-derived conductive carbon nitrides for separator-modified Li–S batteries and flexible supercapacitors10.1039/C9TA11958B ↗
18. Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry10.1016/j.nanoen.2020.104555 ↗
19. Fe3C/Fe nanoparticles embedded in N-doped porous carbon nanosheets and graphene: a thin functional interlayer for PP separator to boost performance of Li–S batteries10.1016/j.cej.2021.129001 ↗
20. The facile synthesis and enhanced lithium–sulfur battery performance of an amorphous cobalt boride (Co2B)@ graphene composite cathode10.1039/C8TA09301F ↗
21. Molybdenum boride as an efficient catalyst for polysulfide redox to enable high-energy-density lithium–sulfur batteries10.1002/adma.202004741 ↗
22. Recent advances of metal phosphides for Li–S chemistry10.1016/j.jechem.2020.07.020 ↗
23. MOF-derived hierarchical CoP nanoflakes anchored on vertically erected graphene scaffolds as self-supported and flexible hosts for lithium–sulfur batteries10.1039/C9TA13046B ↗
24. Lightweight, free-standing 3D interconnected carbon nanotube foam as a flexible sulfur host for high performance lithium–sulfur battery cathodes10.1016/j.ensm.2017.04.004 ↗
25. Carbon nanotube-based materials for lithium–sulfur batteries10.1039/C9TA05347F ↗
26. Scalable salt-templated synthesis of nitrogen-doped graphene nanosheets toward printable energy storage10.1021/acsnano.9b03157 ↗
27. Universal interface and defect engineering dual-strategy for graphene-oxide heterostructures toward promoted Li–S chemistry10.1016/j.cej.2021.129407 ↗
28. Phosphorene as a polysulfide immobilizer and catalyst in high-performance lithium–sulfur batteries10.1002/adma.201602734 ↗
29. Adsorption and diffusion of lithium polysulfides over blue phosphorene for Li–S batteries10.1039/C8NR04868A ↗
30. Accelerated Li–S chemistry at a cooperative interface built in situ10.1039/C9TA07342F ↗
31. Rational structure designs of 2D materials and their applications toward advanced lithium–sulfur battery and lithium-selenium battery10.1016/j.cej.2020.125976 ↗
32. Nitrogen-doped graphene-supported mixed transition-metal oxide porous particles to confine polysulfides for lithium–sulfur batteries10.1002/aenm.201800595 ↗
33. Large-area preparation of crack-free crystalline microporous conductive membrane to upgrade high energy lithium–sulfur batteries10.1002/aenm.201802052 ↗
34. Self-templating synthesis of prismatic-like N-doped carbon tubes embedded with Fe3O4 as a high-efficiency polysulfide-anchoring-conversion mediator for high performance lithium–sulfur batteries10.1016/j.cej.2020.128153 ↗
35. Deciphering interpenetrated interface of transition metal oxides/phosphates from atomic level for reliable Li/S electrocatalytic behavior10.1016/j.nanoen.2020.105602 ↗
36. 3D printed Li–S batteries with in situ decorated Li2S/C cathode: interface engineering induced loading-insensitivity for scaled areal performance10.1002/aenm.202100420 ↗
37. Single-atom catalysis enables long-life, high-energy lithium–sulfur batteries10.1007/s12274-020-2827-4 ↗
38. Iron single-atom catalyst anchored on nitrogen-rich MOF-derived carbon nanocage to accelerate polysulfide redox conversion for lithium sulfur batteries10.1039/C9TA11680J ↗
39. A new type of multifunctional polar binder: toward practical application of high energy lithium sulfur batteries10.1002/adma.201605160 ↗
40. Use of tween polymer to enhance the compatibility of the Li/electrolyte interface for the high-performance and high-safety quasi-solid-state lithium–sulfur battery10.1021/acs.nanolett.8b01882 ↗
41. In operando infrared spectroscopy of lithium polysulfides using a novel spectro-electrochemical cell10.1016/j.jpowsour.2017.08.030 ↗
42. Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li–S batteries10.1039/c2ee03495f ↗
43. Synchronous immobilization and conversion of polysulfides on a VO2–VN binary host targeting high sulfur load Li–S batteries10.1039/C8EE01402G ↗
44. Recent progress on advanced imaging techniques for lithium–ion batteries10.1002/aenm.202000806 ↗
45. Deciphering the reaction mechanism of lithium–sulfur batteries by in situ/operando synchrotron-based characterization techniques