Elementary growth mechanisms of creep cavities in AZ31 alloy revealed by in situ X-ray nano-tomography
Source abstract
Abstract
International audience ; To gain new insights into damage evolution during superplastic deformation, creep cavity growth in commercial Mg alloy (AZ31) was investigated by the novel technique of in situ X-ray nano-tomography. For this, a sample was subjected to deformation under tensile creep conditions (3.2 MPa and 673 K resulting in a strain rate of about 6.6 × 10−5 s−1) and simultaneously characterized by in situ 3D imaging at a pixel size of 100 nm thanks to a scan time of 7 s. The sample showed presence of several pre-existing cavities in its initial state (average equivalent radius of less than 1 µm). Evolution of 30 of these cavities was tracked during deformation and it was observed that the cavities followed intricate and unique growth routes, resulting in very complex cavity shapes. An original shape based classification of evolution of cavities was proposed. As a result five evolution types emerged and it was seen that one cavity generally grew by a combination of several evolution types. Individual evolution types were further linked to plausible growth mechanisms and compared with appropriate models. This indicated a combination of diffusion and grain boundary sliding to be the primary growth mechanism responsible for creep cavity growth in the tested condition. It is worth noting that in addition to the expected cavity growth, a reduction in volume of several cavities was also observed during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Economical and Environmental Factors in Light Alloys Automotive Applications10.1007/s11661-007-9156-z ↗
2. Sheet metal forming of magnesium wrought alloys — formability and process technology10.1016/S0924-0136(01)00760-9 ↗
3. Superplastic forming characteristics of AZ41 magnesium alloy10.1016/S1003-6326(21)65526-7 ↗
4. Creep cavitation in metals10.1016/S0749-6419(02)00111-0 ↗
5. Cavitation in creep10.1007/BF00570398 ↗
6. Simultaneous tomography and diffraction analysis of creep damage10.1126/science.1106778 ↗
7. Nucleation of cavities at second phase particles in grain boundaries10.1016/0001-6160(78)90050-0 ↗
8. Creep cavity growth models for austenitic stainless steels10.1016/j.msea.2016.08.005 ↗
9. Cavitation during high-temperature deformation in Al - Mg alloys10.1016/j.actamat.2013.01.012 ↗
10. Continuous characterization by X-ray microtomography of damage during high-temperature deformation of magnesium alloy10.1016/j.scriptamat.2013.03.001 ↗
11. Application of X-ray microtomography to analysis of cavitation in AZ61 magnesium alloy during hot deformation10.1016/j.msea.2010.11.083 ↗
12. In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography10.1016/j.msea.2007.05.108 ↗
13. Void growth in copper during high-temperature power-law creep10.1016/j.actamat.2010.10.003 ↗
14. In situ nanotomography study of creep cavities in Al-3.6-Cu alloy10.1016/j.actamat.2018.12.020 ↗
15. Dessolier · 2018
16. Boissiere · 2008
17. Conducting controlled in situ high temperature tensile tests within a SEM
18. Effect of temperature on deformation mechanisms of AZ31 Mg-alloy under tensile loading10.1016/j.msea.2020.138957 ↗
19. Fast in situ nanotomography at ESRF10.1017/S1431927618014496 ↗
20. ID16B: a hard X-ray nanoprobe beamline at the ESRF for nano-analysis10.1107/S1600577515019839 ↗
21. The physics of superplastic deformation10.1016/0921-5093(91)90312-B ↗
22. Paganin · 2006
23. X-ray phase nanotomography resolves the 3D human bone ultrastructure10.1371/journal.pone.0035691 ↗
24. Weber · 2016
25. Stripe and ring artifact removal with combined wavelet-Fourier filtering
26. The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities10.1016/j.nimb.2013.09.030 ↗
27. Picture thresholding using an iterative selection method10.1109/TSMC.1978.4310039 ↗
28. High-temperature deformation followed in situ by X-ray microtomography: a methodology to track features under large strain10.1107/S1600577521001107 ↗
29. Investigating performance variations of an optimized GPU-ported granulometry algorithm
30. Damage development during superplasticity of light alloys10.1115/1.2884335 ↗
31. Cavitation and cavity-induced fracture during superplastic deformation10.1007/BF00349941 ↗
32. Creep cavitation without a vacancy flux10.1179/msc.1976.10.9.319 ↗
33. Cavity growth on a sliding grain boundary10.1007/BF02663303 ↗
34. The growth of grain- boundary voids under stress10.1080/14786435908243264 ↗
35. Intergranular fracture at elevated temperature10.1016/0001-6160(75)90047-4 ↗
36. Correction to: intergranular fracture at elevated temperature10.1016/0036-9748(77)90333-7 ↗
37. Constraints on the diffusive cavitation of isolated grain boundary facets in creeping polycrystals10.1016/0001-6160(81)90150-4 ↗
38. Creep cavitation by vacancy diffusion in plastically deforming solid10.1179/msc.1978.12.4.172 ↗
39. Constraints on diffusional cavity growth rates10.1179/030634576790431417 ↗
40. Riedel · 1987
41. Frost · 1982
42. The surface energy of metals10.1016/S0039-6028(98)00363-X ↗