Performance evaluation of porous gas channel ribs in a polymer electrolyte fuel cell
Source abstract
Abstract
Abstract Commercialization of hydrogen fuel cells is scaling at an unprecedented rate. As a result, developers are focused on stack manufacturability and the associated challenges to scaling-up an assembly with thousands of individual parts that have strict dimensional tolerances. This paper first proposes a fuel cell architecture designed for continuous manufacturing that could result in all components of a stack being contained in a rolled good. This concept would move the reactant gas distribution channels into the gas diffusion substrate. The performance of the porous ribs that would result from this concept is compared with a conventional solid rib flow distributor. Performance and cell resistance are presented in a series of single factor experiments that investigate a wide PEMFC operating space. The results show that a porous rib cathode flow field is feasible, with performance benefits at near- and over-saturated operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Flow field bipolar plates in a proton exchange membrane fuel cell: analysis; modeling10.1016/j.enconman.2016.10.053 ↗
2. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
3. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review10.1016/j.ijhydene.2012.07.076 ↗
4. Contact resistance prediction and structure optimization of bipolar plates10.1016/j.jpowsour.2005.12.080 ↗
5. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
6. Modeling and optimization of the air system in polymer exchange membrane fuel cell systems10.1016/j.jpowsour.2005.06.008 ↗
7. Alloy selection and die design for stamped proton exchange membrane fuel cell (PEMFC) bipolar plates10.1016/j.procir.2014.03.078 ↗
8. A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: materials, fabrication, and material selection10.1016/j.jpowsour.2014.04.081 ↗
9. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/S0378-7753(03)00023-5 ↗
10. Thermal management issues in a PEMFC stack - a brief review of current status10.1016/j.applthermaleng.2008.05.009 ↗
11. 2011
12. A PEM fuel cell with metal foam as flow distributor10.1016/j.enconman.2012.03.018 ↗
13. Effects of flow field design on the performance of a PEM fuel cell with metal foam as the flow distributor10.1016/j.ijhydene.2012.05.008 ↗
14. Ultra-high current density water management in polymer electrolyte fuel cell with porous metallic flow field10.1016/j.jpowsour.2013.03.145 ↗
15. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
16. Channel intrusion of gas diffusion media and the effect on fuel cell performance10.1016/j.jpowsour.2007.12.065 ↗
17. Structural and physical properties of GDL and GDL/BPP combinations and their influence on PEMFC performance10.1002/fuce.200400022 ↗
18. High-rate roll-to-roll stack and lamination of multilayer structured membrane electrode assembly10.1016/j.jmapro.2016.06.022 ↗
19. Experimental investigation on uniform and zigzag positioned porous inserts on the rib surface of cathode flow channel for performance enhancement in PEMFC10.1016/j.ijhydene.2015.01.175 ↗
20. Adoption of novel porous inserts in the flow channel of pem fuel cell for the mitigation of cathodic flooding10.1016/j.ijhydene.2019.08.151 ↗
21. Effects of the porous structures in the porous flow field type separators on fuel cell performances10.1016/j.ijhydene.2014.07.070 ↗
22. Goebel SG. Impact of land width and channel span on fuel cell performance. J. Power Sources, 196, 2011.10.1016/j.jpowsour.2011.04.005 ↗
23. 2013
24. Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells10.1016/j.ijheatmasstransfer.2013.12.059 ↗