journal article·2020-02

Higher voltage, wider voltage plateau, longer cycle life, and faster kinetics via thermally modulated interfaces between Ramsdellite and Pyrolusite MnO2 for lithium-ion battery cathodes

Prashant Kumar Gupta, Arihant Bhandari, Jishnu Bhattacharya, Raj Ganesh S Pala

Publisher page

Abstract

The cathode for Lithium-ion batteries is dominated by transition metal oxides that exist in numerous polymorphic structures. To emphasize generality and the underpinnings of thermodynamics in the stability, activity, and kinetics of lithiation, we utilize the nomenclature of the native structure and non-native structure for referring to different transition metal oxides polymorphic structures. The native structure is the thermodynamic ground state (bulk phase) structure and various non-native structures have different discrete translational symmetry in their sub-surface regions compared to the native structure. Typically, non-native structures have higher (i.e. less negative) bulk formation energy and more open structures than the native structure. Hence, non-native structures are expected to generate higher discharge potential and better lithium mobility as a positive electrode material. However, non-native structures may be limited in stability, which can be increased by scaffolding them with the native structure. To explore these hypotheses, we synthesize pure Ramsdellite MnO2 (r/NN1-MnO2) and thermally phase transform it gradually to Pyrolusite MnO2 (β/N-MnO2) and intimately interfaced (r/NN1-MnO2)/(β/N-MnO2) intergrowth structures are obtained. As the temperature increases, the ratio of r/NN1-MnO2 to β/N-MnO2 in the intergrowth structure decreases; so does the discharge potential and lithium mobility in the lithium-ion coin cell. In addition, the galvanostatic discharge profile shows a wider discharge plateau for intergrowth structures as compared to the pure native and non-native structure. We rationalize these trends in discharge potential using formation energies computed via density functional theory followed by a statistical averaging to account for the different types of lithium intercalation sites in the intergrowth structures. The wider discharge plateau in the intergrowth structure is rationalized with the presence of additional interfacial sites of higher stability than the site available in single phase native and non-native structure. The capacity retention is higher for the intergrowth structure, which is ~64% compared to ~42% and ~32% as obtained for pure native and non-native structures after 100 cycles at a rate of 0.1C. The improved capacity retention for intergrowth structure is due to higher structural stability and available free volume, where the presence of native structure acts as a scaffold to stabilize the non-native structure. The electrochemical impedance spectroscopy suggests that the larger percentage of non-native structure helps in better transport due to greater free volume present in r/NN1-MnO2 structure with wider 2×1 channel compared to the native structure with the narrow 1×1 channel. This study demonstrates how a systematic control of the relative percentage of each phase, without change in chemical composition, helps in designing cathodes with improved capacity and cycle life, thereby expanding the available material space.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Design considerations10.1016/0167-2738(94)90409-X ↗
2. Manganese oxides for lithium batteries10.1016/S0079-6786(97)81003-5 ↗
3. The effect of particle size and morphology on the rate capability of 4.7 V LiMn1.5+δNi0. 5−δO4 spinel lithium-ion battery cathodes10.1016/j.electacta.2007.12.057 ↗
4. Synthesis of high-voltage (4.5 V) cycling doped LiCoO2 for use in lithium rechargeable cells10.1021/cm0347032 ↗
5. Hematite microdisks as an alternative anode material for lithium-ion batteries10.1016/j.matlet.2019.03.058 ↗
6. Ascorbic acid-assisted eco-friendly synthesis of NiCo2O4 nanoparticles as an anode material for high-performance lithium-ion batteries
7. Hollow mesoporous heterostructures negative electrode comprised of CoFe2O4@ Fe3O4 for next generation lithium ion batteries10.1016/j.micromeso.2018.06.005 ↗
8. Electrochemical cycling‐induced amorphization of cobalt (II, III) oxide for stable high surface area oxygen evolution electrocatalysts10.1002/celc.201900880 ↗
9. Lithium batteries and cathode materials10.1021/cr020731c ↗
10. First observation of phase transformation of all four Fe2O3 phases (γ→ ε→ β→ α-phase)10.1021/ja9046069 ↗
11. Correlating voltage profile to molecular transformations in ramsdellite MnO2 and its implication for polymorph engineering of lithium ion battery cathodes10.1021/acs.jpcc.8b02708 ↗
12. Two-dimensional MnO2 as a better cathode material for lithium ion batteries10.1021/acs.jpcc.5b10354 ↗
13. Quantitatively predict the potential of MnO2 polymorphs as magnesium battery cathodes10.1021/acsami.5b11460 ↗
14. Stabilization and growth of non-native nanocrystals at low and atmospheric pressures10.1063/1.3678181 ↗
15. Non-native transition metal monoxide nanostructures: unique physicochemical properties and phase transformations of CoO, MnO and ZnO10.1038/am.2017.38 ↗
16. Linking the electronic structure of solids to their thermodynamic and kinetic properties10.1016/j.matcom.2009.08.008 ↗
17. Dopant induced stabilization of metastable zircon-type tetragonal LaVO410.1021/acs.jpcc.7b04508 ↗
18. Understanding Li diffusion in Li-intercalation compounds10.1021/ar200329r ↗
19. TiO2 polymorphs in ‘rocking-chair’Li-ion batteries10.1016/j.mattod.2015.02.015 ↗
20. Lithium insertion in bifferent TiO2 modifications10.1016/0167-2738(88)90352-9 ↗
21. Effect of diffusion on lithium intercalation in titanium dioxide10.1103/PhysRevLett.86.1275 ↗
22. One-dimensional diffusion of Li in rutile10.1103/PhysRev.136.A284 ↗
23. Syntheses and characterization of Wurtzite CoO, rocksalt CoO, and spinel Co3O4 nanocrystals: their interconversion and tuning of phase and morphology10.1021/cm101138h ↗
24. Nanostructured MnO2 anode materials for advanced lithium ion batteries10.1007/s10854-016-5284-9 ↗
25. Modulating oxygen evolution reactivity in MnO2 through polymorphic engineering10.1021/acs.jpcc.9b05823 ↗
26. Catalyzing cubic-to-hexagonal phase transition in NaYF4 via ligand enhanced surface ordering10.1021/acs.cgd.8b00535 ↗
27. Energetics of MnO2 polymorphs in density functional theory10.1103/PhysRevB.93.045132 ↗
28. Thermodynamics of phase selection in MnO2 framework structures through alkali intercalation and hydration10.1021/jacs.6b11301 ↗
29. Interpretation of some γ-MnO2 diffraction patterns10.1107/S0365110X59001001 ↗
30. Structural and electrochemical properties of the proton/γ-MnO2 system10.1016/0079-6786(94)00005-2 ↗
31. Facile controlled synthesis of MnO2 nanostructures of novel shapes and their application in batteries10.1021/ic051715b ↗
32. Hydrothermal synthesis and electrochemical characterization of α-MnO2 nanorods as cathode material for lithium batteries10.1016/S1452-3981(23)15445-9 ↗
33. Synthesis and characterization of the hollandite-type MnO2 as A cathode material in lithium batteries10.1016/S0013-4686(99)00441-7 ↗
34. Capture lithium in αMnO2: insights from first principles10.1021/cm302347j ↗
35. Electrochemistry of hollandite α-MnO2: Li-ion and Na-ion insertion and Li2O incorporation10.1021/cm400864n ↗
36. β-MnO2 as a cathode material for lithium ion batteries from first principles calculations10.1039/c3cp50392e ↗
37. Synthesis and characterization of γ-MnO2 from LiMn2O410.1016/0378-7753(89)80146-6 ↗
38. Li2MnO3-Stabilized LiMO2 (M= Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
39. Synthesis, characterization and electrochemistry of lithium battery electrodes: x Li2MnO3·(1− x) LiMn0.333Ni0.333Co0.333O2 (0≤ x≤ 0.7)10.1021/cm801245r ↗
40. Manganese oxides for lithium batteries
41. Electrochemistry of manganese dioxide in lithium nonaqueous cell II. X‐ray diffractional and electrochemical characterization on deep discharge products of electrolytic manganese dioxide10.1149/1.2086435 ↗
42. Electrochemistry of manganese dioxide in lithium nonaqueous cell I. X‐ray diffractional study on the reduction of electrolytic manganese dioxide10.1149/1.2096421 ↗
43. The structure of a 3 V LixMnO2 cathode and its change upon electrochemical lithiation10.1149/1.1838824 ↗
44. Synthesis and characterization of γ‐MnO2 samples with unusual structural parameters10.1149/1.1393296 ↗
45. Lithiation of ramsdellite–pyrolusite MnO2; NMR, XRD, TEM and electrochemical investigation of the discharge mechanism10.1016/j.jpowsour.2005.05.059 ↗
46. Surface characterization of heat-treated electrolytic manganese dioxide10.1016/j.jcis.2004.12.030 ↗
47. Microporosity of heat-treated manganese dioxide10.1016/j.jpowsour.2006.10.028 ↗
48. Manganese dioxide structural effects on its thermal decomposition10.1016/j.mseb.2011.06.007 ↗
49. Computational understanding of Li-ion batteries
50. Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides10.1103/PhysRevB.56.1354 ↗
51. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
52. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium10.1103/PhysRevB.49.14251 ↗
53. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
54. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
55. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
56. Oxidation energies of transition metal oxides within the GGA+ U framework10.1103/PhysRevB.73.195107 ↗
57. Layered-layered-spinel cathode materials prepared by A high-energy ball-milling process for lithium-ion batteries10.1021/acsami.5b08906 ↗
58. Rietveld texture analysis from diffraction images10.1524/zksu.2007.2007.suppl_26.125 ↗
59. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
60. Surface spectroscopic characterization of manganese/aluminum oxide catalysts10.1021/j150665a026 ↗
61. Alumina-supported manganese oxide catalysts: I. Characterization: effect of precursor and loading10.1006/jcat.1994.1325 ↗
62. Study of structural defects in γ‐MnO2 by Raman spectroscopy10.1002/jrs.838 ↗
63. Vibrational spectroscopy of bulk and supported manganese oxides10.1039/a807821a ↗
64. Structure–property relationship of bifunctional MnO2 nanostructures: highly efficient, ultra-stable electrochemical water oxidation and oxygen reduction reaction catalysts identified in alkaline media10.1021/ja505186m ↗
65. Charge storage mechanism of MnO2 electrode used in aqueous electrochemical capacitor10.1021/cm049649j ↗
66. Study on thermal decomposition of MnO2 and Mn2O3 by thermal analysis10.2320/matertrans1960.24.754 ↗
67. Kinetic behavior of manganese dioxide in Li/MnO2 primary batteries investigated using electrochemical impedance spectroscopy under nonequilibrium state10.1149/2.0981412jes ↗