Interplay between temperature and biaxial loading on creep behavior of perfluorosulfonic-acid membranes
Source abstract
Abstract
Abstract The durability and performance of polymer-electrolyte fuel cells largely depend on the mechanical durability of perfluorosulfonic-acid membranes. With the increasing demand for operating at higher temperature for fuel cells, creep is more detrimental to the mechanical durability of the membrane. Nevertheless, even though the membrane is in a biaxial stress state during fuel cell operation conditions, numerous studies on creep responses of the membrane are conducted under uniaxial loading, leaving the biaxial creep behavior unexplored. In this paper, the uniaxial and biaxial creep behavior at different temperatures are investigated. The biaxial stress states is found to suppress the delayed elastic strain at temperatures below 65 °C and retard the viscous flow strain at 80 °C. Master curves are constructed based on both uniaxial and biaxial creep tests, and it is found that even though the equilibrium time is much longer for biaxial creep tests, the activation energy is the same, indicating the same creep deformation mechanism from molecular level. In addition, increasing biaxial stress ratio from 0 to 0.1 causes substantial decrease in creep strain. The findings here are expected to provide new insights for understanding membrane failure and be helpful for fuel cell optimization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
2. Review: durability and degradation issues of PEM fuel cell components10.1002/fuce.200700053 ↗
3. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
4. Membrane durability: physical and chemical degradation
5. Electrochemical/mechanical coupling in ion-conducting soft matter10.1021/acs.jpclett.5b01639 ↗
6. Accelerated stress testing of fuel cell membranes subjected to combined mechanical/chemical stressors and cerium migration10.1149/2.0241806jes ↗
7. 3D failure analysis of pure mechanical and pure chemical degradation in fuel cell membranes10.1149/2.0451713jes ↗
8. 3D visualization of membrane failures in fuel cells10.1016/j.jpowsour.2017.01.129 ↗
9. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
10. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell10.1016/j.rser.2019.109289 ↗
11. Modeling coupled durability and performance in polymer-electrolyte fuel cells: membrane effects10.1149/2.0281907jes ↗
12. Fatigue and creep to leak tests of proton exchange membranes using pressure-loaded blisters10.1016/j.jpowsour.2009.06.083 ↗
13. Use of mechanical tests to predict durability of polymer fuel cell membranes under humidity cycling10.1016/j.jpowsour.2010.12.031 ↗
14. Microstructural and mechanical characterization of catalyst coated membranes subjected to in situ hygrothermal fatigue10.1149/2.0471514jes ↗
15. Mechanical degradation of fuel cell membranes under fatigue fracture tests10.1016/j.jpowsour.2014.10.135 ↗
16. Fatigue properties of catalyst coated membranes for fuel cells: ex-situ measurements supported by numerical simulations10.1016/j.ijhydene.2016.04.042 ↗
17. Exploring the role of reinforcement in controlling fatigue crack propagation behavior of perfluorosulfonic-acid membranes10.1016/j.ijhydene.2018.02.034 ↗
18. Biaxial fatigue crack propagation behavior of perfluorosulfonic-acid membranes10.1016/j.jpowsour.2018.02.002 ↗
19. Ex-situ tensile fatigue-creep testing: a powerful tool to simulate in-situ mechanical degradation in fuel cells10.1016/j.jpowsour.2016.02.053 ↗
20. Proton exchange membrane fuel cells: high-temperature, low-humidity operation
21. Understanding short-side-chain perfluorinated sulfonic acid and its application for high temperature polymer electrolyte membrane fuel cells10.1039/C3RA43735C ↗
22. Viscoelastic response of nafion. Effects of temperature and hydration on tensile creep10.1021/ma801811m ↗
23. Mechanical properties of Nafion and titania/Nafion composite membranes for polymer electrolyte membrane fuel cells10.1002/polb.20857 ↗
24. Linear hygrothermal viscoelastic characterization of nafion NRE 211 proton exchange membrane10.1002/fuce.201100134 ↗
25. Creep and stress-rupture of Nafion® membranes under controlled environment10.1016/j.mechmat.2010.04.005 ↗
26. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
27. On the use of pressure-loaded blister tests to characterize the strength and durability of proton exchange membranes10.1115/1.3007431 ↗
28. Evaluating the time and temperature dependent biaxial strength of Gore-Select® series 57 proton exchange membrane using a pressure loaded blister test10.1016/j.jpowsour.2009.07.054 ↗
29. The effect of mechanical fatigue on the lifetimes of membrane electrode assemblies10.1115/1.4000629 ↗
30. Mechanical durability of proton exchange membranes with catalyst platinum dispersion10.1016/j.jpowsour.2011.05.069 ↗
31. Hygro-thermal mechanical behavior of Nafion during constrained swelling10.1016/j.jpowsour.2010.11.116 ↗
32. Biaxial elastic–viscoplastic behavior of Nafion membranes10.1016/j.polymer.2010.11.032 ↗
33. In-plane biaxial cyclic mechanical behavior of proton exchange membranes10.1016/j.jpowsour.2017.06.040 ↗
34. Mechanical properties of Nafion 212 proton exchange membrane subjected to hygrothermal aging10.1016/j.jpowsour.2013.03.042 ↗
35. Creep properties of catalyst coated membranes for polymer electrolyte fuel cells10.1016/j.jpowsour.2015.03.082 ↗
36. Hygrothermal characterization of the viscoelastic properties of Gore-Select® 57 proton exchange membrane10.1007/s11043-008-9059-4 ↗
37. Molecular origins of the thermal transitions and dynamic mechanical relaxations in perfluorosulfonate ionomers10.1021/ma0503559 ↗
38. Mechanical properties of perfluoro sulfonated acids: the role of temperature and solute activity10.1002/polb.23284 ↗
39. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses10.1016/j.jpowsour.2007.03.063 ↗
40. Numerical investigation of mechanical durability in polymer electrolyte membrane fuel cells10.1149/1.3328496 ↗
41. Experimental measurement of stress and strain in nafion membrane during hydration cycles10.1149/2.065202jes ↗
42. Real time monitoring of water distribution in an operando fuel cell during transient states10.1016/j.jpowsour.2017.08.067 ↗
43. Mechanical endurance of polymer electrolyte membrane and PEM fuel cell durability10.1002/polb.20863 ↗
44. Modeling of the competition between shear yielding and crazing in glassy polymers10.1016/S0022-5096(00)00016-8 ↗
45. Characterization of membrane degradation growth in fuel cells using X-ray computed tomography10.1149/2.0251806jes ↗
46. Membrane accelerated stress test development for polymer electrolyte fuel cell durability validated using field and drive cycle testing10.1149/2.0101806jes ↗
47. Ex situ measurement and modelling of crack propagation in fuel cell membranes under mechanical fatigue loading10.1016/j.ijhydene.2017.06.151 ↗