journal article·2016-09

Improved electrochemical properties of LiFe0.5Mn0.5PO4/C composite materials via a surface coating process

Chun-Chen Yang, Yen-Wei Hung, Shingjiang Jessie Lue

Publisher page

Abstract

Abstract In this work, a LiFe 0.5 Mn 0.5 PO 4 /C (LFMP/C) material was prepared by a simple solid-state ball-mill method by using LiH 2 PO 4 , γ-MnO 2 , and hollow α-Fe 2 O 3 nano-sized materials. Both γ-MnO 2 and hollow α-Fe 2 O 3 were synthesized by a hydrothermal process. LFMP/C composites coated with different amounts (1–3wt%) of Li 4 Ti 5 O 12 (LTO) were synthesized by a sol-gel method. Their typical properties are studied using X-ray diffraction, micro-Raman spectroscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy, the AC impedance method, and the galvanostatic charge–discharge method. The results revealed that a 1 wt%-LTO-coated LFMP/C composite shows the highest performance among all LFMP/C composite samples. The long-term cycling performance of the LFMP/C composite improves considerably when the LTO ionic conductor is applied on it. Moreover, the 1 wt%-LTO-coated LFMP/C composite, which has the lowest fading rate, maintains high cycling stability at 1 C (141 mAh g −1 ) and 10 C (133 mAh g −1 ) at 55 °C after 100 cycles; by contrast, a bare LFMP/C sample, which demonstrates the highest fading rate, exhibits an unfavorable life cycle, and its discharge capacity decreases rapidly. The ionic conductor coating thus improves the high-temperature performance of LFMP/C composites. A LFMP/C-KS6/SiO 2 full cell is assembled and tested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. LiMn1−xFexPO4 nanorods grown on graphene sheets for ultrahigh rate performance lithium ion batteries10.1002/anie.201103163 ↗
2. Altered electrode degradation with temperature in LiFePO4/mesocarbon microbead graphite cells diagnosed with impedance spectroscopy10.1016/j.electacta.2014.06.081 ↗
3. Electrochemical properties of LiMnxFe1−xPO4 (x=0, 0.2, 0.4, 0.6, 0.8 and 1.0)/vapor grown carbon fiber coreesheath composite nanowire synthesized by electrospinning method10.1016/j.jpowsour.2013.09.133 ↗
4. phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
5. Molenda · 2011
6. Fabrication and characteristics of nano LiFePO4/C composites with high capacity and high rate using nano Fe2O3 as raw materials10.1016/j.nanoen.2014.03.017 ↗
7. LiFePO4/C with high capacity synthesized by hydrothermal reduction method10.1007/s11581-009-0405-6 ↗
8. Effects of fluorine-substitution on the electrochemical behavior of LiFePO4/C cathode materials10.1016/j.jpowsour.2007.06.146 ↗
9. Synthesis and characterization of LiFePO4 and LiFePO4/C cathode material from lithium carboxylic acid and Fe3+10.1016/j.jpowsour.2011.11.019 ↗
10. Electrochemical properties of carbon-coated LiFePO4 cathode using graphite, carbon black, and acetylene black10.1016/j.electacta.2006.01.078 ↗
11. Jahn-Teller structural phase transition around 280K in LiMn2O410.1016/0025-5408(95)00048-8 ↗
12. Structure studies on LiMn0.25Fe0.75PO4 by in-situ synchrotron X-ray diffraction analysis10.1016/j.jpowsour.2008.07.088 ↗
13. Enhanced rate performance of two-phase carbon coated LiFePO4/(C+G) using natural graphite as carbon source10.1016/j.jpowsour.2011.12.032 ↗
14. LiFe0.8Mn0.2PO4/C cathode material with high energy density for lithium-ion batteries10.1016/j.jallcom.2012.04.008 ↗
15. Synthesis and characterization of carbon-coated LiMnPO4 and LiMn1−xFexPO4(x=0.2, 0.3) materials for lithium-ion batteries10.1016/j.jpowsour.2012.06.090 ↗
16. Acetylene black-embedded LiMn0.8Fe0.2PO4/C composite as cathode for lithium ion battery10.1016/j.jpowsour.2013.01.019 ↗
17. Electrochemical performance and stability of LiMn0.6Fe0.4PO4/C composite10.1016/j.jallcom.2013.10.154 ↗
18. Solvothermal synthesis of Fe-doping LiMnPO4 nanomaterials for Li-ion batteries10.1016/j.jpowsour.2013.09.048 ↗
19. LiMn1−xFexPO4 (x = 0, 0.1, 0.2) nanorods synthesized by a facile solvothermal approach as high performance cathode materials for lithium-ion batteries10.1016/j.jpowsour.2013.09.123 ↗
20. Solvothermal synthesis of nano LiMn0.9Fe0.1PO4: reaction mechanism and electrochemical properties10.1016/j.jpowsour.2013.12.010 ↗
21. Enhanced carbon-coating performance of LiMn0.8Fe0.2PO4/C via solvothermal method by adding of grapheme10.1016/j.synthmet.2014.08.013 ↗
22. Improving the electrochemical performance of LiMn0.85Fe0.15PO4-LiFePO4 core-shell materials based on an investigation of carbon source effect10.1016/j.jpowsour.2012.12.063 ↗
23. Micrometer-sized, nanoporous, high-volumetric-capacity LiMn0.85Fe0.15PO4 cathode material for rechargeable lithium-ion batteries10.1002/adma.201102497 ↗
24. Highly energy density olivine cathode material synthesized by coprecipitation technique10.1016/j.electacta.2012.12.027 ↗
25. LiMn0.8Fe0.2PO4: an advanced cathode material for rechargeable lithium batteries10.1002/anie.200903587 ↗
26. LiFe1−xMnxPO4/C composite as cathode material for lithium ion battery10.1142/S1793604711002160 ↗
27. LiMn0.8Fe0.2PO4/C cathode material with high energy density of lithium ion batteries10.1016/j.jallcom.2012.04.008 ↗
28. Increase cycling stability of Li4Ti5O12-coated LiMn1.5Ni0.5O4 as cathode material for lithium-ion batteries10.1016/j.ceramint.2012.09.088 ↗
29. Li4Ti5O12-coated graphite as anode material for lithium-ion batteries10.1016/j.apsusc.2011.11.018 ↗
30. Experimental and theoretical investigation of fluorine substituted LiFe0.4Mn0.6PO4 as cathode material for lithium rechargeable batteries10.1016/j.ssi.2014.03.005 ↗
31. Synthesis and performance of LiMn0.7Fe0.3PO4 cathode material for lithium ion batteries10.1016/j.materresbull.2005.04.020 ↗
32. Enhanced electrochemical performance of LiFe0.6Mn0.4PO4 cathode material prepared by ferrocene-assisted calcination process10.1016/j.jpowsour.2014.11.080 ↗
33. An additional discharge plateau of Mn+3 in LiFe0.5Mn0.5PO4 at high current rates10.1016/j.elecom.2015.03.004 ↗
34. Electrochemical properties of LiFe0.9Mn0.1PO4/Fe2P cathode material by mechanical alloying10.1016/j.jpowsour.2008.12.090 ↗
35. Novel efficient synthesis of nanosized carbon coated LiMnPO4 composite for lithium ion batteries and its electrochemical performance10.1016/j.jpowsour.2014.06.020 ↗
36. High-performance, nanostructure LiMnPO4/C composites synthesized via one-step solid state reaction10.1016/j.jpowsour.2015.02.048 ↗
37. Enhanced electrochemical performance of different morphological C/LiMnPO4 nanoparticles from hollow-sphere Li3PO4 precursor via a delicate polyol-assisted hydrothermal method10.1016/j.jpowsour.2013.10.036 ↗
38. A precursor route to synthesize mesoporous γ-MnO2 microcrystals and their applications in lithium battery and water treatment10.1016/j.jallcom.2011.07.064 ↗
39. Microstructure control of MnO2/CNT hybrid under in-situ hydrothermal conditions10.1016/j.solidstatesciences.2010.07.026 ↗
40. Nano-iron oxide (Fe2O3)/three-dimensional graphene aerogel composite as supercapacitor electrode materials with extremely wide working potential window10.1016/j.matlet.2015.01.040 ↗
41. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
42. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗