journal article·2024-09Open access

Mastering the synthesis of high Na-content, moisture-stable layered oxide cathode for Na-ion batteries

Elisa Grépin, Quentin Jacquet, Ivan A. Moiseev, Antonella Iadecola, Gwenaëlle Rousse, Maxim Avdeev, Artem M. Abakumov, Jean-Marie Tarascon, Sathiya Mariyappan

Abstract

Sodium layered oxides NaxMO2 (x ≤ 1 and M = transition metal) are of great interest for sodium-ion batteries due to their high energy density and cost-effectiveness. However, these materials, whether they are stoichiometric (Na/M  1 as in O3 NaMO2) or not (Na/M  0.7 as in P3/P2 NaxMO2), have certain disadvantages, namely sensitivity to humidity or inadequate capacity, respectively. Herein, we propose an intermediate composition Na0.85Ni0.38Zn0.04Mn0.48Ti0.1O2 that we succeed to stabilize in either O3 or a nanoscale mixture of O3-P3 or O3-P2 phases as proven by X-ray diffraction and transmission electron microscopy, through complex synthesis approaches including quenching, slow cooling and annealing in different atmospheres (Ar, air, O2 etc). We rationalize the stabilization of different phases and microstructure as a function of synthesis conditions and show how it influences the electrochemical performance. Through this study we identified a single phase O3 Na0.85Ni0.38Zn0.04Mn0.48Ti0.1O2 synthesized at 1000 °C in air, which exhibits a high capacity of ~170 mAh/g and good moisture stability. Furthermore, thanks to the synthesis- structure- electrochemical performance relationship identified here, we believe that this study will provide a reliable basis for optimizing the synthesis for best performing sodium layered oxides for commercialization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. X. Liang, J.-Y. Hwang, and Y.-K. Sun, “Practical cathodes for sodium-ion batteries: who will take the crown?,” Adv. Energy Mater., vol. n/a, no. n/a, p. 2301975, doi: 10.1002/aenm.202301975.10.1002/aenm.202301975 ↗
2. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
3. Will sodium layered oxides ever Be competitive for sodium ion Battery applications?10.1149/2.0201816jes ↗
4. Hierarchical O3/P2 heterostructured cathode materials for advanced sodium-ion batteries10.1016/j.ensm.2022.02.043 ↗
5. P. A. Maughan, A. B. Naden, J. T. S. Irvine, and A. R. Armstrong, “High energy density Li/Ni/Co-free O3/P2 sodium layered oxide intergrowth for sodium-ion batteries,” Batter. Supercaps, vol. n/a, no. n/a, p. e202300089, doi: 10.1002/batt.202300089.10.1002/batt.202300089 ↗
6. Manipulating O3/P2 phase ratio in bi-phasic sodium layered oxides via ionic radius control10.1038/s43246-023-00337-8 ↗
7. Enhanced cycle stability of Na0.9Ni0.45Mn0.55O2 through tailoring O3/P2 hybrid structures for sodium-ion batteries10.1016/j.jpowsour.2018.10.058 ↗
8. Z. Cheng et al., “A rational biphasic tailoring strategy enabling high-performance layered cathodes for sodium-ion batteries,” Angew. Chem. Int. Ed., vol. n/a, no. n/a, p. e202117728, doi: 10.1002/anie.202117728.10.1002/anie.202117728 ↗
9. Studies of the layered manganese bronzes, Na2/3[Mn1−xMx]O2 with M=Co, Ni, Li, and Li2/3[Mn1−xMx]O2 prepared by ion-exchange10.1016/S0167-2738(99)00147-2 ↗
10. A general strategy for batch development of high-performance and cost-effective sodium layered cathodes10.1016/j.nanoen.2021.106371 ↗
11. Synthesis and stoichiometry of different layered sodium cobalt oxides10.1021/cm5021788 ↗
12. Rational design of layered oxide materials for sodium-ion batteries10.1126/science.aay9972 ↗
13. Fundamental principles toward designing high Na-containing P2-structured ‘layered’ Na-transition metal oxides as high-performance cathode materials for Na-ion batteries10.1021/acs.chemmater.2c02478 ↗
14. The role of divalent (Zn 2+/Mg 2+/Cu 2+) substituents in achieving full capacity of sodium layered oxides for Na-ion Battery applications10.1021/acs.chemmater.9b05205 ↗
15. Rational selection of sodium layered oxides for high performance Na-ion batteries: P2 vs O3 vs P2-O3 intergrowths10.1149/1945-7111/acec66 ↗
16. Rodriguez-Carvajal · 1990
17. ROCK: the new Quick-EXAFS beamline at SOLEIL
18. ATHENA, artemis, hephaestus: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗
19. New tools for calibrating diffraction setups10.1107/S1600577520000776 ↗
20. On the origin of the 3.3 and 4.5 V steps observed in LiMn2 O 4 ‐ based spinels10.1149/1.1393281 ↗
21. Cooling induced surface reconstruction during synthesis of high-Ni layered oxides
22. Annealing in argon universally upgrades the Na-storage performance of Mn-based layered oxide cathodes by creating bulk oxygen vacancies10.1002/anie.202219230 ↗
23. Influence of synthesis conditions on electrochemical properties of P2-type Na2/3Fe2/3Mn1/3O2 for rechargeable Na batteries10.1002/smtd.201800032 ↗
24. Optimization of the composition of the Li1 − z Ni1 + z O 2 electrode materials: structural, magnetic, and electrochemical studies10.1149/1.1836614 ↗
25. The stability of P2-layered sodium transition metal oxides in ambient atmospheres10.1038/s41467-020-17290-6 ↗