journal article·2024-06Open access

A novel carbon coating by electrochemical deposition in deep eutectic solvent with the assistance of ammonium chloride for stainless steel bipolar plates

Wei Liu, Wenruo Li, Wenjing Dong, Likui Guo, Yue Zou, Chufan Yu, Chuyan Sun, Naibao Huang, Xiannian Sun

Abstract

In this work, pulse electrodeposition method was proposed to directly deposit amorphous carbon coating (ACC) onto 316L stainless steel substrate in choline chloride-ethylene glycol deep eutectic solvent (DES) mixed with ammonium chloride (NH 4 Cl) to fabricate bipolar plates . The obtained dense ACC has a thickness of ∼400 nm. Potentiodynamic and potentiostatic polarization tests demonstrated that the corrosion current density of ACC coated 316L steel was of the order of 10 −7 A cm −2 in the simulated proton exchange membrane fuel cells (PEMFC) working environment, and the self-corrosion potential of the coating positively shifted by 0.4V, indicating a significant improvement on corrosion resistance of the coated steel plate due to excellent electrochemical stability of ACC. The Rockwell C indentation test showed that the as-obtained ACC was strongly bonded to the substrate and also had high in-plane strength . Further numerical simulation and comparison experiments showed that C was chemically bonded with Fe in the substrate, which was boosted by the assistance of NH 4 Cl. The intact and strong bonding between ACC and the substrate is highly helpful to improve corrosion resistance . The success in coating stainless steel plate with ACC by pulse electrodeposition method provides a promising alternation for coating of proton exchange membrane electrolyzer cell (PEMEC) and PEMFC metal bipolar plates .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ionic liquids properties and applications · CO2 Reduction Techniques and Catalysts · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Anion-exchange membrane water electrolyzers and fuel cells10.1039/D2CS00038E ↗
2. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2017.09.006 ↗
3. Electrodeposited Ni–Mo–Cr–P coatings for AISI 1020 steel bipolar plates10.1016/j.ijhydene.2020.06.014 ↗
4. Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC10.1016/j.ijhydene.2020.01.203 ↗
5. Boronization of nickel and nickel clad materials for potential use in polymer electrolyte membrane fuel cells10.1016/j.surfcoat.2006.08.039 ↗
6. Effect of annealing on mechanical property and formability of Cu/Al clad bipolar plates in proton exchange10.1002/adem.201600289 ↗
7. Assessment of the durability of low-cost Al bipolar plates for High Temperature PEM fuel cells10.1016/j.ijhydene.2018.07.070 ↗
8. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2017.09.006 ↗
9. Performance of gold-coated titanium bipolar plates in unitized regenerative fuel cell operation10.1016/j.jpowsour.2009.06.030 ↗
10. Development and evaluation of nitride coated titanium bipolar plates for PEM fuel cells10.1016/j.ijhydene.2020.09.217 ↗
11. In-situ electrodeposition of conductive polypyrrole-graphene oxide composite coating for corrosion protection of 304SS bipolar plates10.1016/j.jallcom.2018.07.277 ↗
12. Superior conducting polypyrrole anti-corrosion coating containing functionalized carbon powders for 304 stainless steel bipolar plates in proton exchange membrane fuel cells10.1016/j.cej.2020.124675 ↗
13. Synthesis and Ex-Situ characterizations of diamond-like carbon coatings for metallic bipolar plates in PEM fuel cells10.1016/j.ijhydene.2020.09.259 ↗
14. Ultrathin effective TiN protective films prepared by plasma-enhanced atomic layer deposition for high performance metallic bipolar plates of polymer electrolyte membrane fuel cells10.1016/j.apsusc.2020.146215 ↗
15. Coated stainless steels evaluation for bipolar plates in PEM water electrolysis conditions10.1016/j.ijhydene.2021.03.100 ↗
16. Effect of preoxidation of titanium on the titanium–ceramic bonding10.1016/j.surfcoat.2007.05.056 ↗
17. Amorphous carbon film growth on Si: correlation between stress and generation of defects into the substrate10.1063/1.1940738 ↗
18. Man-made diamonds10.1038/176051a0 ↗
19. Influence of dc bias voltage on the refractive index and stress of carbon-diamond films deposited from a CH4/Ar rf plasma10.1063/1.350219 ↗
20. Erratum: ‘‘Nanocrystallites in tetrahedral amorphous carbon films’’10.1063/1.118154 ↗
21. Effect of deposition voltage on the microstructure of electrochemically deposited hydrogenated amorphous carbon films10.1016/j.carbon.2004.07.016 ↗
22. Effect of electrolyte type on properties of diamond - like carbon films electrodeposited onto N-type Si substrate, application as electrode for supercapacitors10.1007/s12633-019-00341-z ↗
23. Synthesis of copper nanoparticles containing diamond-like carbon films by electrochemical method10.1016/j.elecom.2005.11.011 ↗
24. Synthesis of DLC films by electrolysis of dimethyl sulfoxide10.1149/1.1807531 ↗
25. Effect of carbon chain length of chlorinated carboxylic acids on morphology of the carbon films electrodeposited from aqueous solutions10.1016/j.colsurfa.2021.126943 ↗
26. Low voltage electrodeposition of diamond-like carbon films10.1016/S0167-577X(03)00102-2 ↗
27. Eutectic electrolyte with unique solvation structure for high-performance zinc-ion batteries10.1002/anie.202206717 ↗
28. Electrical double layer model and thermodynamic coupling for electrochemically deposited hydrogenated amorphous carbon films10.1149/2.034212jes ↗
29. Ternary eutectic electrolytes attune the electrode/electrolyte interphase layer toward long-life zinc ion batteries
30. Electrochemical decomposition of choline chloride based ionic liquid analogues10.1039/b906318h ↗
31. Hardness of DLC films deposited on stainless steel
32. Metal concentration dependent mechanical properties of electrodeposited nickel incorporated diamond like carbon (Ni-DLC) thin films studied by nanoindentation10.1016/j.apsusc.2019.05.256 ↗
33. Deposition of WO3 doped amorphous hydrogenated carbon film by using liquid phase electrodeposition technique and its mechanical properties10.1016/j.solidstatesciences.2010.12.012 ↗
34. Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells10.1016/j.jpowsour.2009.02.029 ↗
35. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/S0378-7753(03)00023-5 ↗
36. cp2k: atomistic simulations of condensed matter systems10.1002/wcms.1159 ↗
37. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
38. Separable dual-space Gaussian pseudopotentials10.1103/PhysRevB.54.1703 ↗
39. Relativistic separable dual-space Gaussian pseudopotentials from H to Rn10.1103/PhysRevB.58.3641 ↗
40. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
41. Interaction region indicator: a simple real space function clearly revealing both chemical bonds and weak interactions
42. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
43. VMD: visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
44. Superhydrophobic Fe-based amorphous coating fabricated by detonation spraying with excellent anti-corrosion and self-cleaning properties10.1007/s12598-022-02130-x ↗
45. Improved interfacial interactions of dip coatings by in situ introducing silica to enhance corrosion resistance and metal bonding strength10.1021/acs.langmuir.2c02510 ↗