journal article·2024-03Open access

A perspective on the design, manufacturing, and energy content of oxide all-solid-state batteries with scaffold-based composite cathodes

Johannes Kriegler, Martin Finsterbusch, Yunhao Liang, Elena Jaimez-Farnham, Michael F. Zaeh

Abstract

Oxide all-solid-state batteries (ASSBs) are researched as promising substitutes for conventional lithium-ion batteries (LIBs) due to enhanced safety and performance. However, challenges persist from the limited thermal processing window for sintering oxide composite cathodes, causing high electrode-electrolyte interfacial resistances. As an alternative, infiltrating porous oxide electrolyte scaffolds with cathode active materials has been demonstrated successfully on a laboratory scale. Nevertheless, the high densities of oxide solid electrolytes challenge high specific energies and energy densities in industry-relevant cell concepts. This article provides a perspective on the expected gravimetric and volumetric energy densities of all-solid-state batteries with composite cathodes fabricated by oxide electrolyte scaffold infiltration. Firstly, various manufacturing approaches for scaffold-based oxide all-solid-state batteries are reviewed, comparing the achievable cell design parameters. Subsequently, the energy contents attained in existing studies are calculated at electrode and stack levels. Finally, cell designs based on the two most prominent oxide solid electrolytes Li1.5Al0.5Ti1.5(PO4)3 (LATP) and Li7La3Zr2O12 (LLZO) are benchmarked concerning their potential energy content by model calculations and sensitivity analyses, revealing feasible levers for improvement. This work facilitates the commercial application of the scaffold approach by highlighting relevant research directions and designing cells with competitive energy content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Current status and future perspectives of lithium metal batteries10.1016/j.jpowsour.2020.228803 ↗
2. A solid future for battery development10.1038/nenergy.2016.141 ↗
3. Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteries10.1039/C6TA07384K ↗
4. The interplay between solid electrolyte interface (SEI) and dendritic lithium growth10.1016/j.nanoen.2017.08.005 ↗
5. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries10.1038/s41560-021-00852-3 ↗
6. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
7. Hybrid electrolytes for lithium metal batteries10.1016/j.jpowsour.2018.04.099 ↗
8. Solid-state batteries: from 'all-solid' to 'almost-solid'10.1093/nsr/nwad098 ↗
9. Recent progress of the solid-state electrolytes for high-energy metal-based batteries10.1002/aenm.201702657 ↗
10. Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure10.1038/s41560-020-00748-8 ↗
11. All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production10.1016/j.jpowsour.2018.02.062 ↗
12. Prospects on large-scale manufacturing of solid state batteries10.1557/s43581-021-00004-w ↗
13. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
14. Sulfide and oxide inorganic solid electrolytes for all-solid-state Li batteries: a review10.3390/nano10081606 ↗
15. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
16. Scaling up high-energy-density sulfidic solid-state batteries: a lab-to-pilot perspective10.1016/j.joule.2022.07.002 ↗
17. Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries
18. Processing and manufacturing of next generation lithium-based all solid-state batteries10.1016/j.cossms.2022.101003 ↗
19. Toward the scale‐up of solid‐state lithium metal batteries: the gaps between lab‐level cells and practical large‐format batteries
20. Benchmarking the performance of all-solid-state lithium batteries
21. Tape-casting Li0.34La0.56TiO3 ceramic electrolyte films permit high energy density of lithium-metal batteries
22. Processing thin but robust electrolytes for solid-state batteries10.1038/s41560-020-00759-5 ↗
23. Solid electrolyte: the key for high-voltage lithium batteries10.1002/aenm.201401408 ↗
24. Development of an all-solid-state lithium battery by slurry-coating procedures using a sulfidic electrolyte10.1016/j.ensm.2018.11.011 ↗
25. Slurry-based processing of solid electrolytes: a comparative binder study10.1149/2.0961816jes ↗
26. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
27. About the compatibility between high voltage spinel cathode materials and solid oxide electrolytes as a function of temperature10.1021/acsami.6b09059 ↗
28. Compatibility study of oxide and olivine cathode materials with lithium aluminum titanium phosphate10.1007/s11581-017-2276-6 ↗
29. Mechanism study on the interfacial stability of a lithium garnet-type oxide electrolyte against cathode materials10.1021/acsaem.8b01035 ↗
30. Wachsman · 2014
31. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes10.1021/acs.chemrev.0c00101 ↗
32. High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture10.1016/j.mattod.2018.04.004 ↗
33. Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework10.1073/pnas.1719758115 ↗
34. Enabling high-areal-capacity all-solid-state lithium-metal batteries by tri-layer electrolyte architectures10.1016/j.ensm.2019.06.006 ↗
35. Garnet-type oxide electrolyte with novel porous-dense bilayer configuration for rechargeable all-solid-state lithium batteries10.1007/s11581-017-2224-5 ↗
36. Design, production, and characterization of three-dimensionally-structured oxide-polymer composite cathodes for all-solid-state batteries10.1016/j.ensm.2023.03.008 ↗
37. All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries10.1039/D0EE02062A ↗
38. 3D vertically aligned microchannel three-layer all ceramic lithium ion battery for high-rate and long-cycle electrochemical energy storage10.1002/smll.202107442 ↗
39. Nanostructured solid oxide fuel cell electrodes10.1021/nl071007i ↗
40. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
41. A low-cost Al-doped garnet Li7La3Zr2O12 with high ionic conductivity for high-energy solid-state lithium metal batteries10.1063/5.0123632 ↗
42. Thermal properties and ionic conductivity of Li1.3Ti1.7Al0.3(PO4)3 solid electrolytes sintered by field-assisted sintering10.1007/s11581-015-1628-3 ↗
43. Ionic conductivity and ion transport mechanisms of solid‐state lithium‐ion battery electrolytes: a review10.1002/ese3.1163 ↗
44. Interfacial stability of Li metal-solid electrolyte elucidated via in situ electron microscopy10.1021/acs.nanolett.6b03223 ↗
45. Surface chemistry mechanism of ultra-low interfacial resistance in the solid-state electrolyte Li7La3Zr2O1210.1021/acs.chemmater.7b03002 ↗
46. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
47. Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries10.1016/j.ensm.2018.10.012 ↗
48. Impact of air exposure and surface chemistry on Li–Li7La3Zr2O12 interfacial resistance10.1039/C7TA03162A ↗
49. The origin of high electrolyte-electrode interfacial resistances in lithium cells containing garnet type solid electrolytes10.1039/C4CP02921F ↗
50. Controlling the lithium proton exchange of LLZO to enable reproducible processing and performance optimization10.1039/D0TA11096E ↗
51. Attainable gravimetric and volumetric energy density of Li-S and li ion battery cells with solid separator-protected Li metal anodes10.1021/acs.jpclett.5b01814 ↗
52. Theoretical versus practical energy: a plea for more transparency in the energy calculation of different rechargeable battery systems10.1002/aenm.201803170 ↗
53. Oxide ceramic electrolytes for all-solid-state lithium batteries – cost-cutting cell design and environmental impact10.1039/D2GC03368B ↗
54. Three-dimensional bilayer garnet solid electrolyte based high energy density lithium metal-sulfur batteries10.1039/C7EE01004D ↗
55. Interface-Engineered all-solid-state Li-ion batteries based on garnet-type fast Li+ conductors10.1002/aenm.201600736 ↗
56. Bilayer dense-porous Li7La3Zr2O12 membranes for high-performance Li-garnet solid-state batteries10.1002/advs.202205821 ↗
57. Lithium-ion conductive ceramic textile: a new architecture for flexible solid-state lithium metal batteries10.1016/j.mattod.2018.01.001 ↗
58. Three-Dimensional garnet framework-reinforced solid composite electrolytes with high lithium-ion conductivity and excellent stability10.1021/acsami.9b07830 ↗
59. Intermediate‐stage sintered LLZO scaffolds for Li‐garnet solid‐state batteries10.1002/aenm.202203509 ↗
60. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
61. Influence of lithium ion kinetics, particle morphology and voids on the electrochemical performance of composite cathodes for all-solid-state batteries10.1149/1945-7111/ac50df ↗
62. Oriented porous LLZO 3D structures obtained by freeze casting for battery applications10.1039/C9TA06520B ↗
63. Influence of laser structuring and calendering of graphite anodes on electrode properties and cell performance10.1149/1945-7111/ac725c ↗
64. Enhanced performance and lifetime of lithium-ion batteries by laser structuring of graphite anodes10.1016/j.apenergy.2021.117693 ↗
65. Modeling and simulation of pore morphology modifications using laser-structured graphite anodes in lithium-ion batteries10.1149/2.0062001JES ↗
66. Efficient fast-charging of lithium-ion batteries enabled by laser-patterned three-dimensional graphite anode architectures10.1016/j.jpowsour.2020.228475 ↗
67. Fabrication of all solid-state lithium-ion batteries with three-dimensionally ordered composite electrode consisting of Li0.35La0.55TiO3 and LiMn2O410.1016/j.jpowsour.2008.12.048 ↗
68. Preparation of three dimensionally ordered macroporous Li0.35La0.55TiO3 by colloidal crystal templating process10.1016/j.ssi.2005.05.018 ↗
69. A novel structure of ceramics electrolyte for future lithium battery10.1016/j.jpowsour.2011.07.005 ↗
70. Fabrication of three-dimensional battery using ceramic electrolyte with honeycomb structure by sol-gel process10.1149/1.3308459 ↗
71. Three-dimensionally ordered composite electrode between LiMn2O4 and Li1.5Al0.5Ti1.5(PO4)310.1007/s11581-007-0180-1 ↗
72. Scalable freeze-tape-casting fabrication and pore structure analysis of 3D LLZO solid-state electrolytes10.1021/acsami.9b11780 ↗
73. Dense freeze‐cast Li7La3Zr2O12 solid electrolytes with oriented open porosity and contiguous ceramic scaffold10.1111/jace.15938 ↗
74. A morphologically stable Li/electrolyte interface for all-solid-state batteries enabled by 3D-micropatterned garnet10.1002/adma.202104009 ↗
75. Interface modification of NASICON-structured Li1.5Al0.5Ge1.5(PO4)3 (LAGP) by femtosecond laser structuring and ionic liquid10.20964/2022.05.19 ↗
76. Scaling up picosecond laser ablation of a LATGP-type glass-ceramic solid electrolyte for all-solid-state battery production10.1016/j.jmapro.2023.09.072 ↗
77. 3D-Printing electrolytes for solid-state batteries10.1002/adma.201707132 ↗
78. Fabrication of all-solid-state lithium-ion cells using three-dimensionally structured solid electrolyte Li7La3Zr2O12 pellets10.3389/fenrg.2016.00032 ↗
79. Current status and challenges for automotive battery production technologies10.1038/s41560-018-0130-3 ↗
80. Li7La3Zr2O12 protonation as a means to generate porous/dense/porous-structured electrolytes for all-solid-state lithium-metal batteries10.1021/acsami.2c11375 ↗
81. Improved rate capability in composite solid-state battery electrodes using 3-D architectures10.1021/acsenergylett.3c00528 ↗
82. Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries10.1039/C7EE02723K ↗
83. Low temperature sintering of fully inorganic all-solid-state batteries – impact of interfaces on full cell performance10.1016/j.jpowsour.2020.228905 ↗
84. High-pressure field assisted sintering of half-cell for all-solid-state battery10.1016/j.matlet.2019.03.109 ↗
85. Low-temperature sintering of a garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte and an all-solid-state lithium-ion battery10.1021/acsami.3c01038 ↗
86. Preparing Li‐garnet electrodes with engineered structures by phase inversion and high shear compaction processes10.1111/jace.18037 ↗
87. Reaction mechanisms of Ta-substituted cubic Li7La3Zr2O12 with solvents during storage10.1021/acsami.1c10373 ↗
88. Conversion cathodes for rechargeable lithium and lithium-ion batteries10.1039/C6EE02326F ↗
89. Alloyable viscous fluid for interface welding of garnet electrolyte to enable highly reversible fluoride conversion solid state batteries10.1002/adfm.202208013 ↗
90. NASICON-based solid state Li-Fe-F conversion batteries enabled by multi-interface-compatible sericin protein buffer layer10.1016/j.ensm.2022.02.031 ↗
91. NASICON‐Based solid state Li‐fluoride conversion batteries enabled by constructing a fluorine‐rich trap for Ti 4+10.1002/aenm.202203679 ↗
92. Enable high reversibility of Fe/Cu based fluoride conversion batteries via interfacial gas release and detergency of garnet electrolytes10.1016/j.mattod.2022.10.019 ↗
93. All-in-one lithium-sulfur battery enabled by a porous-dense-porous garnet architecture10.1016/j.ensm.2018.08.009 ↗
94. Challenges in speeding up solid-state battery development10.1038/s41560-023-01208-9 ↗
95. 3D lithium metal anodes hosted in asymmetric garnet frameworks toward high energy density batteries10.1016/j.ensm.2018.04.015 ↗
96. The influence of void space on ion transport in a composite cathode for all-solid-state batteries10.1016/j.jpowsour.2018.06.041 ↗
97. Increasing the performance of all-solid-state Li batteries by infiltration of Li-ion conducting polymer into LFP-LATP composite cathode10.1016/j.jpowsour.2022.231822 ↗
98. Polymer–ceramic composite cathode with enhanced storage capacity manufactured by field-assisted sintering and infiltration10.1021/acsaem.1c02667 ↗
99. Oxide‐based solid‐state batteries: a perspective on composite cathode architecture10.1002/aenm.202201939 ↗
100. Capacity fade in solid-state batteries: interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes10.1021/acs.chemmater.7b00931 ↗