Investigating the performance of a solid oxide electrolyzer multi-stack module with a multiphysics homogenized model
Source abstract
Abstract
Limited by the lower power of a solid oxide electrolyzer (SOE) stack, the scaling-up of the SOE technology requires multiple stacks to be integrated into a hotbox to form a multi-stack module (MSM). It is critical to guarantee the uniformity of stacks in an MSM, which has a prominent impact on its performance and durability. However, the thermo-fluid-electrical couplings between different stacks in an MSM are highly dependent on its structure and stack arrangement, which flowsheet models with lumped parameters cannot describe. This study proposes a three-dimensional (3D) multiphysics MSM model accelerated by the homogenization approach to investigate the MSM performances. By simplifying the stack structure using the homogenization method, the number of mesh elements is remarkably reduced, making it possible to complete the simulation of a four-stack MSM model within 3 min. Simulation shows that a 33% drop in maximum power and a 30 °C increase in temperature difference are induced by uneven gas distribution and unequal stack resistances for an MSM with serial electrical arrangement. It is also shown that the parallel arrangement is less susceptible to non-ideal factors than the serial arrangement, which enlightened the possibility of optimizing the stack arrangement to improve the MSM’s performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Technologies Research · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Breaking the hard-to-abate bottleneck in China’s path to carbon neutrality with clean hydrogen10.1038/s41560-022-01114-6 ↗
2. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
3. Hydrogen carriers10.1038/natrevmats.2016.59 ↗
4. Optimal planning for electricity-hydrogen integrated energy system considering power to hydrogen and heat and seasonal storage10.1109/TSTE.2020.2970078 ↗
5. IEA · 2022
6. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review10.1016/j.rser.2017.09.003 ↗
7. Hydrogen production from water electrolysis: Current status and future trends10.1109/JPROC.2011.2156750 ↗
8. J. Aicart, A. Surrey, L. Champelovier, K. Henault, C. Geipel, O. Posdziech, J. Mougin, Benchmark study of performances and durability between different stack technologies for high temperature electrolysis, Fuel Cells http://dx.doi.org/10.1002/fuce.202300028.10.1002/fuce.202300028 ↗
9. Optimal sizing and pricing of grid-connected renewable power to ammonia systems considering the limited flexibility of ammonia synthesis
10. System development and demonstration of large-scale high-temperature electrolysis10.1149/09101.2537ecst ↗
11. ECOs - A commercial CO2 electrolysis system developed by haldor topsoe10.1149/07801.2879ecst ↗
12. Three-dimensional multi-physics modelling and structural optimization of SOFC large-scale stack and stack tower10.1016/j.ijhydene.2022.10.146 ↗
13. Experimental results of a 10/40 kW-class reversible solid oxide cell demonstration system at forschungszentrum jülich10.1149/1945-7111/accbf0 ↗
14. Networked solid oxide fuel cell stacks combined with a gas turbine cycle10.1016/S0378-7753(01)01051-5 ↗
15. Cycle analysis of planar SOFC power generation with serial connection of low and high temperature SOFCs10.1016/j.jpowsour.2005.09.003 ↗
16. Experimental and numerical analysis of a serial connection of two SOFC stacks in a micro-CHP system fed by biogas10.1016/j.ijhydene.2016.07.222 ↗
17. Non-uniform, multi-stack solid oxide fuel cell (SOFC) system design for small system size and high efficiency10.1016/j.jpowsour.2019.04.037 ↗
18. Thermoelectrical comprehensive analysis and optimization of multi-stack solid oxide fuel cell system10.1016/j.enconman.2023.117297 ↗
19. An operation strategy for mitigating the degradation of solid oxide electrolysis cells for syngas production10.1016/j.jpowsour.2021.230136 ↗
20. Influence of stack arrangement on performance of multiple-stack solid oxide fuel cells with non-uniform potential operation10.1016/j.jpowsour.2008.10.114 ↗
21. Heat up impact on thermal stresses in SOFC for mobile APU applications: Thermo-structural analysis
22. Reduced-order transient thermal modeling for SOFC heating and cooling10.1016/j.jpowsour.2005.11.072 ↗
23. Progress in macro scale mechanical effects investigation of solid oxide fuel cells
24. 3D CFD/FEM analysis of thermomechanical long-term behaviour in SOFCs: Furnace operation with different fuel gases10.1016/j.ijhydene.2015.07.018 ↗
25. Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration10.1016/j.jpowsour.2018.01.021 ↗
26. Numerical simulation of cell-to-cell performance variation within a syngas-fuelled planar solid oxide fuel cell stack10.1016/j.applthermaleng.2016.12.014 ↗
27. Parametric study of kw-class solid oxide fuel cell stacks fueled by hydrogen and methane with fully multiphysical coupling model10.1016/j.ijhydene.2020.12.092 ↗
28. Investigation of proper external air flow path for tubular fuel cell stacks with an anode support feature10.1016/j.enconman.2018.06.036 ↗
29. Optimization of manifold design for 1 kW-class flat-tubular solid oxide fuel cell stack operating on reformed natural gas10.1016/j.jpowsour.2016.07.077 ↗
30. Optimizing solid oxide fuel cell performance to re-evaluate its role in the mobility sector10.1021/acsenvironau.1c00014 ↗
31. Numerical simulation acceleration of flat-chip solid oxide cell stacks by data-driven surrogate cell submodels10.1016/j.jpowsour.2022.232255 ↗
32. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 co-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
33. Wall-function method used to simplify the solid oxide fuel cell model10.1016/j.jpowsour.2021.230396 ↗
34. A novel multi-physics and multi-dimensional model for solid oxide fuel cell stacks based on alternative mapping of BP neural networks10.1016/j.jpowsour.2021.229784 ↗
35. Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks10.1016/j.ijhydene.2016.05.103 ↗
36. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
37. Benchmarking solid oxide electrolysis cell-stacks for industrial power-to-methane systems via hierarchical multi-scale modelling10.1016/j.apenergy.2022.119143 ↗
38. Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system10.1016/j.pecs.2017.12.002 ↗
39. Optimizing the homogeneity and efficiency of a solid oxide electrolysis cell based on multiphysics simulation and data-driven surrogate model10.1016/j.jpowsour.2023.232760 ↗
40. Fardadi · 2013 · 241
41. System approach of a pressurized high-temperature electrolysis10.1149/07801.2987ecst ↗
42. Experimental design, operation, and results of a 4 kW high temperature steam electrolysis experiment10.1016/j.jpowsour.2015.07.098 ↗
43. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks10.1016/j.apenergy.2020.115899 ↗
44. Multiscale modeling of degradation of full solid oxide fuel cell stacks10.1016/j.ijhydene.2021.05.204 ↗
45. Modelling of local mechanical failures in solid oxide cell stacks10.1016/j.apenergy.2021.116901 ↗
46. Chapter 3 - mass transfer in distillation
47. New method for prediction of binary gas-phase diffusion coefficients10.1021/ie50677a007 ↗
48. NIST · 1998