Improving stability of high voltage LiCoO2 by synergetic surface modification via in situ surface conversion
Source abstract
Abstract
LiCoO 2 is a pivotal cathode material that is widely used in commercial lithium ion batteries, which can further increase energy density by charging to high voltages. However, the practical application of LiCoO 2 at voltages higher than 4.6 V is hindered by its structural instability and severe interfacial side reactions at a highly delithiated state. Herein, we improve the high-voltage performance of LiCoO 2 through a synergetic surface modification with a high-voltage-stable and ionic conductive integrated layer, which is realized by the surface coating and heat annealing of Li 2CoP 2O 7. It is discovered that nano-sized Li 2CoP 2O 7 reacts with LiCoO 2 and residual lithium-containing species on the surface at 650 °C to form spinel Co 3O 4 and Li 3PO 4, which accounts for the high-voltage-stability and high lithium-ion conductivity. The Li 2CoP 2O 7-modified LiCoO 2 delivers a high capacity of 203.8 mAh g −1 at 0.2C and a high capacity retention of 75.4% after 200 cycles with a cut-off voltage of 3.0–4.6 V. Moreover, the modified LiCoO 2 exhibits an excellent rate capability of 186.5 mAh g −1 at 5C rate, showing great potential in the application scenarios requiring high energy density and fast charging.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
2. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
3. Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries10.1016/j.jpowsour.2020.228062 ↗
4. Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density10.1039/C8CS00322J ↗
5. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminum doping10.1038/s41560-018-0180-6 ↗
6. New insight into the atomic structure of electrochemically delithiated O3-Li(1-x)CoO2 (0≤ x ≤ 0.5) nanoparticles10.1021/nl303036e ↗
7. LiCoO2 degradation behavior in the high-voltage phase transition region and improved reversibility with surface coating10.1149/2.0181701jes ↗
8. A surface Se-substituted LiCo[O2-δSeδ] cathode with ultrastable high-voltage cycling in pouch full-cells10.1002/adma.202005182 ↗
9. Enabling stable high-voltage LiCoO2 operation by using synergetic interfacial modification strategy10.1002/adfm.202004664 ↗
10. Dynamic evolution of cathode electrolyte interface (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode10.1016/j.ensm.2018.02.016 ↗
11. Outside-in nanostructure fabricated on LiCoO2 surface for high-voltage lithium-ion batteries10.1002/advs.202104841 ↗
12. Al2O3-surface modification of LiCoO2 cathode with improved cyclic performance10.1016/j.jelechem.2017.04.026 ↗
13. Lithium-rich manganese-based cathode materials with highly stable lattice and surface enabled by perovskite-type phase-compatible layer10.1016/j.nanoen.2021.106288 ↗
14. Improvement of structural and electrochemical properties of commercial LiCoO2 by coating with LaF310.1016/j.electacta.2011.03.017 ↗
15. Mg doping and zirconium oxyfluoride coating co-modification to enhance the high-voltage performance of LiCoO2 for lithium ion battery10.1016/j.jallcom.2014.09.147 ↗
16. Improved electrochemical performances of yttrium oxyfluoride-coated Li[Li0.2Mn0.54Ni0.13Co0.13]O2 for lithium ion batteries10.1016/j.jechem.2017.09.024 ↗
17. Enhanced electrochemical properties of Li(Ni0.4Co0.3Mn0.3)O2 cathode by surface modification using Li3PO4-based materials10.1016/j.jpowsour.2010.09.027 ↗
18. Olivine LiCoPO4 phase grown LiCoO2 cathode material for high density Li batteries10.1016/j.elecom.2006.08.058 ↗
19. Surface modification engineering enabling 4.6 V single‐crystalline Ni‐rich cathode with superior long‐term cyclability10.1002/adfm.202109421 ↗
20. Surface modification of LiNi0.5Mn1.5O4 by LiCoO2/Co3O4 composite for lithium-ion batteries10.1016/j.matlet.2012.07.110 ↗
21. High-performance, layered, 3D-LiCoO2 cathodes with a nanoscale Co3O4 coating via chemical etching10.1002/aenm.201100029 ↗
22. Ultrathin spinel membrane-encapsulated layered lithium-rich cathode material for advanced Li-ion batteries10.1021/nl501164y ↗
23. Improved electrochemical performances of LiCoO2 at elevated voltage and temperature with an in situ formed spinel coating layer10.1021/acsami.8b08264 ↗
24. Pushing lithium cobalt oxides to 4.7 V by lattice-matched interfacial engineering10.1002/aenm.202270095 ↗
25. Rational design of coating ions via advantageous surface reconstruction in high‐nickel layered oxide cathodes for Lithium‐ion batteries10.1002/aenm.202101112 ↗
26. Improved electrochemical performance of the LiNi0.8Co0.1Mn0.1O2 material with lithium-ion conductor coating for lithium-ion batteries10.1016/j.ssi.2017.10.017 ↗
27. Li3PO4 surface coating on Ni-rich LiNi0.6Co0.2Mn0.2O2 by a citric acid assisted sol-gel method: improved thermal stability and high-voltage performance10.1016/j.jpowsour.2017.05.042 ↗
28. Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries10.1016/j.jpowsour.2018.03.076 ↗
29. Understanding the role of temperature and cathode composition on interface and bulk: optimizing aluminum oxide coatings for Li-ion cathodes10.1021/acsami.7b00595 ↗
30. Microstructure of LiCoO2 with and without “AlPO4” nanoparticle coating: combined STEM and XPS studies10.1021/cm0715390 ↗
31. Engineering the interface between LiCoO2 and Li10GeP2S12 solid electrolytes with an ultrathin Li2CoTi3O8 interlayer to boost the performance of all-solid-state batteries10.1039/D0EE03212C ↗
32. XPS-surface analysis of SEI layers on Li-ion cathodes: Part I. Investigation of initials surface chemistry10.1149/2.0061805jes ↗
33. M3(PO4)2-Nanoparticle-coated LiCoO2 vs LiCo0.96M0.04O2 (M= Mg and Zn) on electrochemical and storage characteristics10.1149/1.2827993 ↗
34. Enhancing structure and cycling stability of Ni-rich layered oxide cathodes at elevated temperatures via dual-function surface modification10.1016/j.jechem.2022.08.010 ↗
35. Mg-Ti co-doping behavior of porous LiFePO4 microspheres for high-rate lithium-ion batteries
36. The film growth and electrochemical properties of rf-sputtered LiCoO2 thin films10.1016/j.jallcom.2006.07.033 ↗
37. Al2O3 surface coating on LiCoO2 through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages10.1039/C7TA07312G ↗
38. Probing the origin of enhanced stability of “AlPO4” nanoparticle coated LiCoO2 during cycling to high voltages: combined XRD and XPS studies10.1021/cm900862v ↗
39. One-step integrated Comodification to improve the electrochemical performances of high-voltage LiCoO2 for lithium-ion batteries10.1021/acssuschemeng.0c01491 ↗