journal article·2023-02Open access

Synergistic role of functional electrolyte additives containing phospholane-based derivative to address interphasial chemistry and phenomena in NMC811||Si-graphite cells

Bahareh A. Sadeghi, Christian Wölke, Felix Pfeiffer, Masoud Baghernejad, Martin Winter, Isidora Cekic-Laskovic

Abstract

Herein, we report on the 2-phenoxy-1,3,2-dioxaphospholane (PhEPi) molecule as a novel functional phospholane-based electrolyte additive. The presence of PhEPi in optimal concentration in the baseline electrolyte (EC:EMC 3:7, 1 M LiPF6) significantly enhances the electrochemical performance of the NMC811||Si-graphite cell chemistry. To further optimize the cell's overall performance, two well-known film-forming additives, namely, vinylene carbonate (VC) and fluoroethylene carbonate (FEC), were used as co-additives with PhEPi, and the resulting cells thoroughly characterized by selected electrochemical and spectroscopic techniques. The addition of PhEPi to the VC-containing electrolytes showed the complementary advantages of high specific discharge capacity and prolonged cycle life of the considered cells and outperformed the overall performance of the FEC counterpart. To gain better understanding of the role of each additive on the individual positive and negative electrode interphases, we conducted a systematic investigation of both electrodes, which were pre-cycled against Li-metal electrode. Post mortem spectroscopic investigations of the corresponding interphases provided insights into the synergistic effect of VC and PhEPi in the NMC811||Si-graphite cell chemistry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. The Battery Component Readiness Level (BC-RL) framework: a technology-specific development framework10.1016/j.powera.2022.100089 ↗
2. Characterization of the lithium surface by infrared and Raman spectroscopies10.1016/S0378-7753(03)00798-5 ↗
3. In-operando X-ray tomography study of lithiation induced delamination of Si based anodes for lithium-ion batteries10.1149/2.0081407eel ↗
4. Advanced multiphase silicon-based anodes for high-energy-density Li-ion and Li-air batteries10.1149/MA2014-04/2/451 ↗
5. 10 - ceramics for electrochemical storage
6. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
7. Magnesium substitution in Ni-rich NMC layered cathodes for high-energy lithium ion batteries
8. Interfacing Si‐based electrodes: impact of liquid electrolyte and its components
9. Practical implementation of silicon-based negative electrodes in lithium-ion full-cells—challenges and solutions, Lithium-Ion Batter
10. Challenges and recent progress in the development of Si anodes for lithium-ion battery10.1002/aenm.201700715 ↗
11. Electrolyte decomposition reactions on tin- and graphite-based anodes are different10.1149/1.1739312 ↗
12. Studies on the anode/electrolyte interfacein lithium ion batteries10.1007/s007060170110 ↗
13. The solid electrolyte interphase – the most important and the least understood solid electrolyte in rechargeable Li batteries10.1524/zpch.2009.6086 ↗
14. Interfaces and materials in lithium ion batteries: challenges for theoretical electrochemistry
15. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
16. New insights into the structure-property relationship of high-voltage electrolyte components for lithium-ion batteries using the pKa value10.1016/j.electacta.2015.10.002 ↗
17. Electrolyte-additive-driven interfacial engineering for high-capacity electrodes in lithium-ion batteries: promise and challenges10.1021/acsenergylett.0c00468 ↗
18. Running out of lithium? A route to differentiate between capacity losses and active lithium losses in lithium-ion batteries10.1039/C7CP05405J ↗
19. Face to face at the cathode electrolyte interphase: from interface features to interphase formation and dynamics
20. All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents10.1038/s41560-019-0474-3 ↗
21. Lithium metal batteries enabled by synergetic additives in commercial carbonate electrolytes10.1021/acsenergylett.1c00365 ↗
22. Electrolyte additive strategy enhancing the electrochemical performance of a soft-packed LiCoO2//graphite full cell10.1039/D2DT01088G ↗
23. Confronting the challenges of next‐generation silicon anode‐based lithium‐ion batteries: role of designer electrolyte additives and polymeric binders10.1002/cssc.201900209 ↗
24. Re-evaluating common electrolyte additives for high-voltage lithium ion batteries
25. Toward green battery cells: perspective on materials and technologies
26. Jow · 2014
27. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries10.1016/S0013-4686(01)00858-1 ↗
28. Effect of vinylene carbonate additive in Li-ion batteries: comparison of LiCoO2 ∕ C , LiFePO4 ∕ C , and LiCoO2 ∕ Li4Ti5O12 systems10.1149/1.3111891 ↗
29. FTIR and DEMS investigations on the electroreduction of chloroethylene carbonate-based electrolyte solutions for lithium-ion cells10.1016/S0378-7753(99)00116-0 ↗
30. Understanding the influence of electrolyte additives on the electrochemical performance and morphology evolution of silicon nanowire based lithium-ion battery anodes10.1016/j.jpowsour.2017.05.093 ↗
31. Enhanced thermal stability of a lithiated nano-silicon electrode by fluoroethylene carbonate and vinylene carbonate10.1016/j.jpowsour.2012.08.066 ↗
32. The role of electrolyte additives on the interfacial chemistry and thermal reactivity of Si-Anode-Based Li-ion battery10.1021/acsaem.9b01094 ↗
33. Fluorinated cyclic phosphorus(III)-Based electrolyte additives for high voltage application in lithium-ion batteries: impact of structure–reactivity relationships on CEI formation and cell performance10.1021/acsami.9b03359 ↗
34. High-voltage liquid electrolytes for Li batteries: progress and perspectives10.1039/D1CS00450F ↗
35. Understanding the effectiveness of phospholane electrolyte additives in lithium‐ion batteries under high‐voltage conditions10.1002/celc.202100107 ↗
36. A reality check and tutorial on electrochemical characterization of battery cell materials: how to choose the appropriate cell setup10.1016/j.mattod.2019.07.002 ↗
37. Study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells10.1149/2.005302jes ↗
38. Lithium-metal foil surface modification: an effective method to improve the cycling performance of lithium-metal batteries
39. Effects of carbonate solvents and lithium salts on morphology and coulombic efficiency of lithium electrode10.1149/2.100310jes ↗
40. Surface analysis using shell-isolated nanoparticle-enhanced Raman spectroscopy10.1038/nprot.2012.141 ↗
41. Impact of triethyl borate on the performance of 5 V spinel/graphite lithium-ion batteries10.1021/acsaem.2c00861 ↗
42. Decrease in capacity in Mn-Based/Graphite commercial lithium-ion batteries: I. Imbalance proof of electrode operation capacities by cell disassembly10.1149/2.071308jes ↗
43. The chemical evolution of solid electrolyte interface in sodium metal batteries10.1126/sciadv.abm4606 ↗
44. The effect of pre-analysis washing on the surface film of graphite electrodes10.1016/j.electacta.2016.04.133 ↗
45. Electrochemical characterization and post-mortem analysis of aged LiMn2O4–Li(Ni0.5Mn0.3Co0.2)O2/graphite lithium ion batteries. Part I: cycle aging10.1016/j.jpowsour.2013.11.080 ↗
46. Review—post-mortem analysis of aged lithium-ion batteries: disassembly methodology and physico-chemical analysis techniques10.1149/2.1211609jes ↗
47. Reproducibility of Li-ion cell reassembling processes and their influence on coin cell aging10.1016/j.est.2019.04.006 ↗
48. Disassembly methodology for conducting failure analysis on lithium–ion batteries10.1007/s10854-011-0452-4 ↗
49. Fluoroethylene carbonate and vinylene carbonate reduction: understanding lithium-ion battery electrolyte additives and solid electrolyte interphase formation10.1021/acs.chemmater.6b02282 ↗
50. Understanding fluoroethylene carbonate and vinylene carbonate based electrolytes for Si anodes in lithium ion batteries with NMR spectroscopy10.1021/jacs.8b03408 ↗
51. 4D-resolved physical model for Electrochemical Impedance Spectroscopy of Li(Ni1-x-yMnxCoy)O2-based cathodes in symmetric cells: consequences in tortuosity calculations10.1016/j.jpowsour.2020.227871 ↗
52. Investigation of the solid electrolyte interphase formation at graphite anodes in lithium-ion batteries with electrochemical impedance spectroscopy10.1016/j.electacta.2017.01.128 ↗
53. Surface-enhanced Raman spectroscopy (SERS): a powerful technique to study the SEI layer in batteries10.1039/D0CC08001B ↗
54. Solid electrolyte interphase instability in operating lithium-ion batteries unraveled by enhanced-Raman spectroscopy10.1021/acsenergylett.1c00436 ↗
55. Further identification to the SEI film on Ag electrode in lithium batteries by surface enhanced Raman scattering (SERS)10.1016/S0378-7753(01)00908-9 ↗
56. Socrates · 2010 · vol. 3
57. Using a lithium bis(oxalato) borate additive to improve electrochemical performance of high-voltage spinel LiNi0.5Mn1.5O4 cathodes at 60°C10.1016/j.electacta.2013.04.082 ↗
58. Infrared and Raman characteristic group frequencies: tables and charts10.1007/s00396-004-1164-6 ↗
59. Analysis of vinylene carbonate derived SEI layers on graphite anode10.1149/1.1785795 ↗
60. Applications of XPS in the characterization of Battery materials10.1016/j.elspec.2018.05.005 ↗
61. Interfacial reactivity of silicon electrodes: impact of electrolyte solvent and presence of conductive carbon10.1021/acsami.1c22044 ↗
62. An electrochemical surface-enhanced Raman spectroscopic study on nanorod-structured lithium prepared by electrodeposition10.1002/jrs.4970 ↗