Adaptive fast charging control using impedance-based detection of lithium deposition
Source abstract
Abstract
The recently introduced impedance-based detection method for the retrospective identification of lithium deposition is used in a long-term ageing study. Six lithium-ion cells are fast charged for 250 cycles with two different strategies, (i) constant-current constant-voltage and (ii) detection-based, adaptive charging control in which the current of the following step is controlled by the detection result of the previous step. The adaptive charging control leads intentionally to critical charging currents with minor lithium deposition effects for the majority of cases. Nevertheless, only marginal capacity fade can be observed after the whole long-term experiment, proving that the detection method reacts sensitively and reliably on minor lithium deposition. On the other hand, the adaptive charge control leads to significantly higher currents, thus reduced charging durations. Hence, the method qualifies for both adaptive fast charging control and for the identification of charging rate limits. A differential voltage analysis is performed before and after the long-term study, identifying the loss of lithium inventory, as well as the loss of anode active material as dominant degradation modes. Additionally, a sensitivity analysis with varying detection time and measurement accuracy is carried out to identify minimum measurement requirements and to increase the method’s time- and cost-efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Re-examining rates of lithium-ion battery technology improvement and cost decline10.1039/D0EE02681F ↗
2. Development of electromobility in European union countries under COVID-19 conditions10.3390/en15010009 ↗
3. In-situ detection of lithium plating using high precision coulometry10.1149/2.0621506jes ↗
4. In situ detection of lithium metal plating on graphite in experimental cells10.1016/j.jpowsour.2015.01.046 ↗
5. Optimization of charging strategy by prevention of lithium deposition on anodes in high-energy lithium-ion batteries – Electrochemical experiments10.1016/j.electacta.2015.08.056 ↗
6. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells10.1016/j.jpowsour.2015.11.044 ↗
7. Interplay of operational parameters on lithium deposition in lithium-ion cells: Systematic measurements with reconstructed 3-electrode pouch full cells10.1149/2.0591607jes ↗
8. Fast-charging effects on ageing for energy-optimized automotive LiNi1/3Mn1/3Co1/3O2/graphite prismatic lithium-ion cells10.1016/j.jpowsour.2019.02.095 ↗
9. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
10. Lithium plating in a commercial lithium-ion battery – A low-temperature aging study10.1016/j.jpowsour.2014.11.065 ↗
11. Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study10.1016/j.jpowsour.2014.03.112 ↗
12. Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries10.1016/j.jpowsour.2014.08.135 ↗
13. Mechanisms of dendritic growth investigated by in situ light microscopy during electrodeposition and dissolution of lithium10.1016/j.jpowsour.2014.03.029 ↗
14. Lithium plating detection using dynamic electrochemical impedance spectroscopy in lithium-ion batteries
15. A new on-line method for lithium plating detection in lithium-ion batteries10.1016/j.jpowsour.2020.227798 ↗
16. Detection of lithium plating in li-ion cell anodes using realistic automotive fast-charge profiles10.3390/batteries7030046 ↗
17. Analyses of polarisation effects and operando detection of lithium deposition in experimental half- and commercial full-cells10.1016/j.electacta.2022.141401 ↗
18. Effects of electrolyte composition on lithium plating in lithium-ion cells10.1149/1.3544439 ↗
19. Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction10.1016/j.jpowsour.2014.07.168 ↗
20. Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction10.1016/j.jpowsour.2016.12.032 ↗
21. How observable is lithium plating? Differential voltage analysis to identify and quantify lithium plating following fast charging of cold lithium-ion batteries10.1149/2.0821904jes ↗
22. Model-based lithium deposition detection method using differential voltage analysis
23. Application of the differential charging voltage analysis to determine the onset of lithium-plating during fast charging of lithium-ion cells
24. Combined dilatometry and voltage analysis for a reliable detection of lithium deposition on graphitic anodes10.1016/j.jpowsour.2021.230870 ↗
25. Novel non-destructive detection methods of lithium plating in commercial lithium-ion batteries under dynamic discharging conditions10.1016/j.jpowsour.2022.231075 ↗
26. Lithium plating detection using differential charging current analysis in lithium-ion batteries10.1016/j.est.2022.105345 ↗
27. Li plating as unwanted side reaction in commercial Li-ion cells – A review10.1016/j.jpowsour.2018.02.063 ↗
28. The development of optimal charging strategies for lithium-ion batteries to prevent the onset of lithium plating at low ambient temperatures10.1016/j.est.2019.100798 ↗
29. Analysis and detection of lithium deposition after fast charging of lithium-ion batteries by investigating the impedance relaxation10.1016/j.jpowsour.2021.230009 ↗
30. Differential voltage analyses of high-power, lithium-ion cells10.1016/j.jpowsour.2004.07.021 ↗
31. A novel mechanistic modeling framework for analysis of electrode balancing and degradation modes in commercial lithium-ion cells10.1016/j.jpowsour.2017.01.026 ↗
32. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
33. Differential voltage analysis as a tool for analyzing inhomogeneous aging: A case study for LiFePO4—Graphite cylindrical cells10.1016/j.jpowsour.2017.09.059 ↗
34. Operando lithium plating quantification and early detection of a commercial LiFePO4 cell cycled under dynamic driving schedule10.1016/j.jpowsour.2017.04.072 ↗
35. A method for improving the robustness of linear Kramers-Kronig validity tests10.1016/j.electacta.2014.01.034 ↗
36. Detecting onset of lithium plating during fast charging of Li-ion batteries using operando electrochemical impedance spectroscopy
37. Fast charging technique for high power LiFePO 4 batteries: A mechanistic analysis of aging10.1016/j.jpowsour.2016.04.140 ↗
38. A study on the influence of lithium plating on battery degradation10.3390/en13133458 ↗
39. Generalized distribution of relaxation times analysis for the characterization of impedance spectra10.3390/batteries5030053 ↗
40. Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling10.1016/j.jpowsour.2013.06.130 ↗
41. Model predictive fast charging control by means of a real-time discrete electrochemical model10.1016/j.est.2021.103056 ↗
42. Calendar aging of lithium-ion batteries10.1149/2.0411609jes ↗
43. Insertion electrode materials for rechargeable lithium batteries10.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
44. Investigation of path–dependent degradation in lithium–Ion batteries**10.1002/batt.202000160 ↗