Study on durability of proton exchange membrane fuel cell stack based on mesoporous carbon supported platinum catalysts under dynamic cycles conditions
Source abstract
Abstract
Insufficient durability still restricts the large-scale commercialization of fuel cells, rapid degradation of catalyst is considered to be the main reason, while support also plays an important role. In this study, the cyclic potential scanning with varies harshness to the catalysts are performed firstly. The membrane electrode assemblies (MEAs) are assembled to stack to perform the accelerate durability test (ADT) under New European Driving Cycle (NEDC) for 1000 h. The results show that, the durability of self-made catalysts is better than the commercial, and the voltage decay rate of commercial-MEA-Stack (35 μV h −1) is significantly higher than the self-made-MEA-Stack (5 μV h −1 ). Before and after the durability test, the charge and mass transfer impedance of S-MEA-Stack changes little, while that of C-MEA-Stack increases. Post-characterizations show that the self-made catalysts have better stability. In conclusion, the catalyst layer binding network based on mesoporous carbon has a more stable structure, which ensures the effective gas transport, while the high specific surface area structure is conducive to uniform distribution and stability of ionomers. Pt nanoparticles in mesoporous carbon can avoid the agglomeration and sintering, and the poisoning effect of sulfonate, thus improves the durability of the catalyst layer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effect of rotational control for accelerating water discharge on the performance of a circular polymer electrolyte membrane fuel cell10.3390/en15082843 ↗
2. Hierarchical sizing and power distribution strategy for hybrid energy storage system10.1007/s42154-021-00164-y ↗
3. Experimental study on hydrogen leakage and emission of fuel cell vehicles in confined spaces10.1007/s42154-020-00096-z ↗
4. Air-side fin geometry of a tube-strip heat exchanger for fuel cell vehicles10.1007/s42154-021-00147-z ↗
5. Experimental investigation on local behaviors of PEMFC with segmented cell10.1007/s42154-021-00145-1 ↗
6. Control strategy assessment for improving PEM fuel cell system efficiency in fuel cell hybrid vehicles10.3390/en15062004 ↗
7. Cathode design for proton exchange membrane fuel cells in automotive applications10.1007/s42154-021-00148-y ↗
8. Understanding the Ebalance for water management in hydroxide exchange membrane fuel cells10.1016/j.jpowsour.2022.231514 ↗
9. Recent advances in electrocatalysts for oxygen reduction reaction10.1021/acs.chemrev.5b00462 ↗
10. Proton exchange membrane (PEM) fuel cells with platinum group metal (PGM)-Free cathode10.1007/s42154-021-00146-0 ↗
11. Pt-based intermetallic nanocrystals in cathode catalysts for proton exchange membrane fuel cells: from precise synthesis to oxygen reduction reaction strategy10.3390/catal11091050 ↗
12. Electrochemiluminescence imaging-based high-throughput screening platform for electrocatalysts used in fuel cells10.1021/ac300875x ↗
13. Investigation of polymer electrolyte membrane fuel cell internal behaviour during long term operation and its use in prognostics10.1016/j.jpowsour.2017.07.018 ↗
14. Defect engineering in carbon‐based electrocatalysts: insight into intrinsic carbon defects10.1002/adfm.202001097 ↗
15. Defects on carbons for electrocatalytic oxygen reduction10.1039/C7CS00690J ↗
16. Design criteria for stable Pt/C fuel cell catalysts10.3762/bjnano.5.5 ↗
17. Models of strong metal-support interaction (SMSI) in Pt on TiO2 catalysts10.1016/0021-9517(85)90169-1 ↗
18. Carbon application in chemical power sources10.1007/BF02756940 ↗
19. Composite carbon nanotube and titania catalyst supports for enhanced activity and durability
20. Nanostructured Ti0.7Mo0.3O2 support enhances electron transfer to Pt: high-performance catalyst for oxygen reduction reaction10.1021/ja2039562 ↗
21. Progress in modified carbon support materials for Pt and Pt-alloy cathode catalysts in polymer electrolyte membrane fuel cells10.1016/j.pmatsci.2016.06.002 ↗
22. Preparation of a graphitized-carbon-supported PtNi octahedral catalyst and application in a proton-exchange membrane fuel cell10.1021/acsami.9b17248 ↗
23. Study on durability of Pt supported on graphitized carbon under simulated start-up/shut-down conditions for polymer electrolyte membrane fuel cells10.1016/j.jechem.2017.05.012 ↗
24. Oxygen reduction reaction activity of platinum nanoparticles decorated nitrogen doped carbon in proton exchange membrane fuel cell under real operating conditions10.1016/j.ijhydene.2016.05.146 ↗
25. Metal-organic frameworks derived platinum-cobalt bimetallic nanoparticles in nitrogen-doped hollow porous carbon capsules as a highly active and durable catalyst for oxygen reduction reaction10.1016/j.apcatb.2017.11.077 ↗
26. The impact of the morphology of the carbon support on the activity and stability of nanoparticle fuel cell catalysts10.1039/C6CY01679K ↗
27. Mesoporous carbon confined intermetallic nanoparticles as highly durable electrocatalysts for the oxygen reduction reaction10.1039/D0TA01437K ↗
28. Electrochemical activity and durability of platinum nanoparticles supported on ordered mesoporous carbons for oxygen reduction reaction10.1016/j.ijhydene.2009.12.183 ↗
29. Enhancing stability and efficiency of oxygen reduction reaction in polymer electrolyte fuel cells with high surface area mesoporous carbon synthesized from spent mushroom compost10.1039/C8SE00520F ↗
30. Development of MEAs with Pt/mesoporous carbon as a cathode catalyst10.1149/06403.0137ecst ↗
31. Durability of Pt catalysts supported on ordered mesoporous carbon for proton exchange membrane fuel cells10.1149/05801.1277ecst ↗
32. Highly ordered mesoporous carbons as the support for Pt catalysts towards alcohol electrooxidation: the combined effect of pore size and electrical conductivity10.1016/j.ijhydene.2012.11.029 ↗
33. Ordered porous carbons with tunable pore sizes as catalyst supports in direct methanol fuel cell10.1021/jp0370472 ↗
34. A high-durability graphitic black pearl supported Pt catalyst for a proton exchange membrane fuel cell stack
35. Effect of mesoporous carbon on oxygen reduction reaction activity as cathode catalyst support for proton exchange membrane fuel cell10.1016/j.ijhydene.2022.06.131 ↗
36. Yoshizumi · 2021