journal article·2022-10

Electrochemical Impedance Spectroscopy Setup based on Standard Measurement Equipment

Marcel Esser, Gunnar Rohde, Christian Rehtanz

Publisher page

Abstract

The approach of electrochemical impedance spectroscopy is widely used to analyze electrochemical systems such as batteries and fuel cells. The majority of commercial spectroscopes is however limited to the investigation of devices under test at laboratory scale. In this paper the development of a setup performing impedance spectroscopy of commercial lithium-ion battery cells and complete packs up to 42 V and 10S4P configuration is demonstrated which is entirely based on standard measurement equipment. Galvanostatic AC excitation of up to 5A peak-to-peak can be reached. The obtained impedance spectra qualitatively match the theoretical expectations and reference results from literature. Acquired results can be successfully fitted to a second-order Thevenin equivalent circuit model without requirement of specialized analysis software. OriginPro is used as an example for the presented setup. A similar sensitivity towards external factors such as temperature and probe contacting as it applies for commercial devices is observed. The described setup can be reproduced in most electrical laboratories with similar equipment and the application scenario is not limited to batteries. This gives access to a powerful analysis tool complementing commercial impedance spectroscopy devices by extending measurement ranges towards higher voltage and excitation current as well as lower impedance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Kanoun · 2019
2. 2018
3. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review
4. On the use of electrochemical impedance spectroscopy to characterize and model the aging phenomena of lithium-ion batteries: a critical review
5. Plett · 2015
6. From Li-ion single cell model to battery pack simulation
7. Impedance spectroscopy of battery cells: Theory versus experiment
8. Pack-level electrochemical impedance spectroscopy in EV batteries enabled by a DC fast charger
9. A critical review of improved deep learning methods for the remaining useful life prediction of lithium-ion batteries10.1016/j.egyr.2021.08.182 ↗
10. Generalized characterization methodology for performance modelling of lithium-ion batteries10.3390/batteries2040037 ↗
11. Online impedance measurement of batteries using the cross-correlation technique10.1109/TPEL.2019.2939269 ↗
12. A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as Li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems10.1016/j.jpowsour.2017.03.042 ↗
13. Prediction of overcharge-induced serious capacity fading in nickel cobalt aluminum oxide lithium-ion batteries using electrochemical impedance spectroscopy
14. A comparison of methodologies for the non-invasive characterisation of commercial li-ion cells10.1016/j.pecs.2019.01.001 ↗
15. Instruments · 2016
16. Applications of Kramers—Kronig transforms in the analysis of electrochemical impedance data—III. Stability and linearity10.1016/0013-4686(90)80010-L ↗
17. Die dispersion und absorption von röntgenstrahlen
18. On the theory of dispersion of X-Rays10.1364/JOSA.12.000547 ↗
19. Bode · 1945
20. Electrochemical impedance spectroscopy and its applications10.1007/0-306-46916-2_2 ↗
21. Battery impedance measurement using electrochemical impedance spectroscopy board
22. An electrochemical impedance spectroscopy measurement system for electric vehicle batteries
23. Impedance spectroscopy for battery monitoring with switched mode amplifiers
24. Christensen · 2016
25. Online and on-board battery impedance estimation of battery cells, modules or packs in a reconfigurable battery system or multilevel inverter
26. Embedded electrochemical impedance spectroscopy into battery management system
27. Electrochemical impedance spectroscopy measurement of lithium battery based on lock-in amplifier
28. An electrochemical impedance spectroscopy measurement method based on multi-frequency injection
29. Implementation of a low-cost electrochemical impedance spectroscope
30. . BRS Messtechnik, Products for professional battery measuring, B.R.S. Messtechnik, URL https://www.brs-messtechnik.de/en/battery-measuring/#BTC1.
31. . Digatron Power Electronics, Electrochemical impedance spectroscopy: EIS-Meter, in cooperation with ISEA-RWTH Aachen, Aachen, Digatron Power Electronics, URL https://www.digatron.com/Portals/38/Images/documents/PRODUKTBLATT_EIS_EN.PDF?ver=2019-06-12-091051-297×tamp=1561628176183.
32. . Gamry Instruments, Reference 3000 product brochure: Potentiostat/Galvanostat/ZRA, Gamry Instruments, URL https://www.gamry.com/assets/Uploads/Reference-3000-Product-Brochure-11-16-20.pdf.
33. A practical circuit-based model for Li-ion battery cells in electric vehicle applications
34. . Thunder Sky Winston, Datasheet TSWB-LYP160AHA-B, Winston Battery, URL https://en.winston-battery.com/static/upload/file/20220214/1644799480338423.pdf.
35. . Samsung SDI, Datasheet ICR18650-26J, akkuteile.de, URL https://www.akkuteile.de/lithium-ionen-akkus/18650/samsung/samsung-icr18650-26j-2600mah-3-6v-3-7v-ungeschuetzt100614_1215.
36. Cycle aging studies of lithium nickel manganese cobalt oxide-based batteries using electrochemical impedance spectroscopy10.1016/j.electacta.2018.04.045 ↗
37. An improved feedforward-long short-term memory modeling method for the whole-life-cycle state of charge prediction of lithium-ion batteries considering current-voltage-temperature variation10.1016/j.energy.2022.124224 ↗
38. Electrochemical impedance spectroscopy based state of health estimation for lithium-ion battery considering temperature and state of charge effect