journal article·2022-07Open access

A high-fidelity real-time capable dynamic discretized model of proton exchange membrane fuel cells for the development of control strategies

Yingxu Liu, Steffen Dirkes, Markus Kohrn, Maximilian Wick, Stefan Pischinger

Abstract

Advanced modeling tools are widely applied to enhance control strategies of proton exchange membrane fuel cells. Existing dynamic fuel cell models, however, still face a conflict between computational speed and simulation accuracy. To overcome this contradiction, a novel discretized fuel cell model is presented based on existing segmented modeling approaches. With a new twofold subdivision method and a newly designed interpolation algorithm, this model allows accurate investigation of the dynamic temperature, two-phase water, and current density distribution. Compared to the finite element method, the simulation duration of hours is reduced to minutes, while the characteristic of high-fidelity is maintained. Model validations are performed on both cell-level and stack-level to demonstrate the model's high accuracy and real-time simulation capability, illustrating the high potential for applying the model in the development of fuel cell control strategies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Barbir · 2013
2. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
3. A review of recent development: transport and performance modeling of PEM fuel cells10.1016/j.apenergy.2015.12.075 ↗
4. Fuel cells: current technology challenges and future research needs
5. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
6. Effect of flow and temperature distribution on the performance of a PEM fuel cell stack10.1016/j.jpowsour.2006.07.030 ↗
7. Experimental investigation on water and heat management in a PEM fuel cell using response surface methodology10.1016/j.ijhydene.2014.04.195 ↗
8. Portable pem fuel cell system: water and heat management
9. Gou · 2010
10. A review on temperature control of proton exchange membrane fuel cells10.3390/pr9020235 ↗
11. New perspectives on fuel cell technology: a brief review10.3390/membranes10050099 ↗
12. Humidification strategy for polymer electrolyte membrane fuel cells – a review10.1016/j.apenergy.2018.08.125 ↗
13. Numerical models for PEMFC cold start: a review10.4271/2017-01-1182 ↗
14. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
15. Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells10.1016/j.jpowsour.2003.07.007 ↗
16. Three dimensional computations and experimental comparisons for a large-scale proton exchange membrane fuel cell10.1149/2.1461607jes ↗
17. Investigation of current density spatial distribution in PEM fuel cells using a comprehensively validated multi-phase non-isothermal model10.1016/j.ijheatmasstransfer.2019.119294 ↗
18. Numerical investigation of water and temperature distributions in a proton exchange membrane electrolysis cell10.1007/s11431-021-1810-9 ↗
19. Three-dimensional numerical simulation of full-scale proton exchange membrane fuel cells at high current densities10.1016/j.jpowsour.2020.229412 ↗
20. Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance10.1016/j.renene.2009.08.017 ↗
21. A dynamic scalable segmented model of PEM fuel cell systems with two-phase water flow10.1016/j.matcom.2018.05.006 ↗
22. Numerical modeling of anode-bleeding PEM fuel cells: effects of operating conditions and flow field design10.1016/j.ijhydene.2020.10.228 ↗
23. A segmented model for studying water transport in a PEMFC10.1016/j.jpowsour.2008.07.018 ↗
24. Predicting current density distribution of proton exchange membrane fuel cells with different flow field designs10.1016/j.jpowsour.2010.09.094 ↗
25. Quasi-three dimensional dynamic modeling of a proton exchange membrane fuel cell with consideration of two-phase water transport through a gas diffusion layer10.1016/j.energy.2015.06.076 ↗
26. Spiegel · 2007
27. 2009
28. Estimating the end-of-life of PEM fuel cells: guidelines and metrics10.1016/j.apenergy.2016.05.076 ↗
29. Performance and degradation of proton exchange membrane fuel cells: state of the art in modeling from atomistic to system scale10.1016/j.jpowsour.2015.11.041 ↗
30. In-situ diagnostic tools for hydrogen transfer leak characterization in PEM fuel cell stacks part II: operational applications10.1016/j.jpowsour.2016.05.019 ↗
31. O'Hayre · 2016
32. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
33. Two-phase flow and droplet behavior in microchannels of PEM fuel cell10.1016/j.ijhydene.2016.09.043 ↗
34. Gas–liquid two-phase flow in microchannels Part I: two-phase flow patterns10.1016/S0301-9322(98)00054-8 ↗
35. On gas-liquid two-phase flow regimes in microchannels
36. Experimental study on two-phase flow and pressure drop in millimeter-size channels10.1016/j.applthermaleng.2005.12.010 ↗
37. Gas–liquid two-phase flow patterns in parallel channels for fuel cells10.1016/j.jpowsour.2008.05.080 ↗
38. Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes10.1021/j100168a060 ↗
39. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
40. Modeling liquid water effects in the gas diffusion and catalyst layers of the cathode of a PEM fuel cell10.1149/1.1808633 ↗
41. A fuzzy model to manage water in polymer electrolyte membrane fuel cells10.3390/pr9060904 ↗
42. Knudsen diffusivity and permeability of pemfc microporous coated gas diffusion layers for different polytetrafluoroethylene loadings10.1149/2.036302jes ↗
43. Performance comparison of Fick's, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode10.1016/S0378-7753(02)00724-3 ↗
44. Modeling transient organic vapor transport in porous media with the dusty gas model10.1016/S0309-1708(98)00011-6 ↗
45. Three-dimensional modeling of planar solid oxide fuel cells and the rib design optimization10.1016/j.jpowsour.2009.06.056 ↗
46. J.C. Amphlett, R.M. Baumert, R.F. Mann, B.A. Peppley, P.R. Roberge, T.J. Harris, Performance Modeling of the Ballard Mark IV Solid Polymer Electrolyte Fuel Cell, (n.d.) vol. 9.10.1149/1.2043959 ↗
47. Mann · 2000 · 8
48. Experimental and numerical studies of local current mapping on a PEM fuel cell10.1016/j.ijhydene.2008.07.035 ↗
49. A parametric study of stack performance for a 4.8 kw PEM fuel cell stack, Thesis Present
50. 2006
51. Analysis of optimal heat transfer in a pem fuel cell cooling plate10.1002/fuce.200330112 ↗
52. Three-dimensional multiphase modeling of cold start processes in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.072 ↗
53. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
54. Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC10.1016/j.enconman.2009.11.011 ↗
55. Direct three-dimensional reconstruction of a nanoporous catalyst layer for a polymer electrolyte fuel cell10.1016/j.jpowsour.2010.09.044 ↗
56. Thermal management issues in a PEMFC stack – a brief review of current status10.1016/j.applthermaleng.2008.05.009 ↗
57. 3D CFD modeling of a PEM fuel cell stack10.1016/j.ijhydene.2016.10.065 ↗
58. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells10.1016/j.jpowsour.2018.12.008 ↗
59. S.J.C. Cleghorn, C.R. Derouin, M.S. Wilson, S. Gottesfeld, A Printed Circuit Board Approach to Measuring Current Distribution in a Fuel Cell, (n.d.) 10.
60. In-situ methods for the determination of current distributions in PEM fuel cells10.1016/S0013-4686(98)00137-6 ↗
61. In situ current distribution measurements in polymer electrolyte fuel cells10.1149/1.1584440 ↗