On the rate capability of supercapacitors characterized by a constant-phase element
Source abstract
Abstract
Abstract The capacitances of electrochemical systems determined from cyclic voltammetry (CV) are difficult to compare due to the unavoidable constant-phase element (CPE) behavior of such systems. These difficulties can be illustrated by simulated voltammograms of simplified circuits composed of a resistor in series with a CPE (R-CPE circuits). The capacitance extracted from CV of R-CPE circuits follows a power law relationship with sweep rate. By comparing the CV-obtained capacitance with that obtained from electrochemical impedance spectroscopy (EIS) data, a critical sweep rate can be defined as the rate where these capacitances intersect. This critical rate can be used to formulate an effective time constant for R-CPE circuits. Sweep rates at least two orders of magnitude below the critical rate should be used in CV to mitigate the influence of the system's time constant on the measured capacitance. To allow for more accurate comparisons of supercapacitors, the CPE parameters R, Q, and α should be reported, rather than the capacitance vs. sweep rate data from CV measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Fuel Cells and Related Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Materials for electrochemical capacitors10.1038/nmat2297 ↗
2. How to measure and report the capacity of electrochemical double layers, supercapacitors, and their electrode materials10.1007/s10008-020-04804-x ↗
3. Towards establishing standard performance metrics for batteries, supercapacitors and beyond10.1039/C8CS00581H ↗
4. Highlighting a common confusion in the computation of capacitance of electrochemical energy storage devices10.1021/acs.jpcc.1c01288 ↗
5. Integration of electrochemical microsupercapacitors with thin film electronics for on-chip energy storage
6. Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
7. Time domain responses of constant phase electrodes10.1016/0013-4686(93)80339-2 ↗
8. Intrinsic limitations of impedance measurements in determining electric double layer capacitances10.1016/j.electacta.2011.12.051 ↗
9. Reevaluation of performance of electric double-layer capacitors from constant-current charge/discharge and cyclic voltammetry10.1038/srep38568 ↗
10. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
11. LSV/CV modelling of electrochemical reactions with interfacial CPE behaviour, using the generalised Mittag-Leffler function10.1016/j.jelechem.2011.12.010 ↗
12. Dead matter has memory10.1088/0031-8949/43/2/011 ↗
13. Single step bonding of thick anodized aluminum oxide templates to silicon wafers for enhanced system-on-a-chip performance10.1016/j.jpowsour.2020.228643 ↗
14. Watson · 2020
15. The RC time “constant” at a disk electrode10.1016/j.elecom.2003.12.002 ↗
16. High power density supercapacitors based on the carbon dioxide activated d-glucose derived carbon electrodes and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid10.1016/j.jpowsour.2015.01.157 ↗
17. Revisiting cyclic voltammetry and electrochemical impedance spectroscopy analysis for capacitance measurements10.1016/j.electacta.2020.136109 ↗
18. Physical interpretation of cyclic voltammetry for measuring electric double layer capacitances10.1016/j.electacta.2011.12.118 ↗
19. Behavior of molybdenum nitrides as materials for electrochemical capacitors: comparison with ruthenium oxide10.1149/1.1838571 ↗
20. The effect of crystallinity on the rapid pseudocapacitive response of Nb2O510.1002/aenm.201100494 ↗
21. Modelling voltametric data from electrochemical capacitors10.1016/j.jpowsour.2018.11.078 ↗
22. Impedance analysis of porous carbon electrodes to predict rate capability of electric double-layer capacitors10.1016/j.jpowsour.2014.05.058 ↗
23. Power limitations of supercapacitor operation associated with resistance and capacitance distribution in porous electrode devices10.1016/S0378-7753(01)00936-3 ↗
24. Electrochemical impedance spectroscopy of porous electrodes : the effect of pore size distribution10.1016/S0013-4686(99)00121-8 ↗
25. The effect of pore size distribution on the frequency dispersion of porous electrodes10.1016/S0013-4686(99)00436-3 ↗
26. Power and energy analysis of fractional-order electrical energy storage devices10.1016/j.energy.2016.05.104 ↗
27. Evaluation of the pseudocapacitance in RuO2 with a RuO2/GC thin film electrode10.1016/j.electacta.2003.08.013 ↗
28. Electrochemical fabrication of monolithic electrodes with core/shell sandwiched transition metal oxide/oxyhydroxide for high-performance energy storage10.1021/acsami.6b06073 ↗
29. Flute type micropores activated carbon from cotton stalk for high performance supercapacitors10.1016/j.jpowsour.2017.05.054 ↗
30. Improved conductivity and capacitance of interdigital carbon microelectrodes through integration with carbon nanotubes for micro-supercapacitors10.1007/s12274-016-1137-3 ↗
31. High performance asymmetric supercapacitor based on polypyrrole/graphene composite and its derived nitrogen-doped carbon nano-sheets10.1016/j.jpowsour.2017.02.034 ↗
32. Cation molecular structure affects mobility and transport of electrolytes in porous carbons10.1149/2.0131904jes ↗
33. High-performance supercapacitor applications of NiO-Nanoparticle-Decorated millimeter-long vertically aligned carbon nanotube Arrays via an effective supercritical CO 2 -assisted method10.1002/adfm.201502711 ↗
34. Highly active ruthenium oxide coating via ALD and electrochemical activation in supercapacitor applications10.1039/C5TA03742E ↗
35. Influence of particle size on performance of a nickel oxide nanoparticle-based supercapacitor10.1039/C4RA16776G ↗
36. Amorphous nanostructured FeOOH and Co-Ni double hydroxides for high-performance aqueous asymmetric supercapacitors10.1016/j.nanoen.2015.12.029 ↗
37. Ultrathin MnO2 nanoflakes deposited on carbon nanotube networks for symmetrical supercapacitors with enhanced performance10.1016/j.jpowsour.2016.11.112 ↗
38. Influence of surface oxidation on ion dynamics and capacitance in porous and nonporous carbon electrodes10.1021/acs.jpcc.6b01204 ↗
39. Sputtered titanium nitride films with finely tailored surface activity and porosity for high performance on-chip micro-supercapacitors10.1016/j.jpowsour.2020.229406 ↗
40. Mn 3 O 4 nanoparticles anchored to multiwall carbon nanotubes: a distinctive synergism for high-performance supercapacitors10.1039/C5NJ00825E ↗
41. Inverse problem of reconstructing the capacitance of electric double-layer capacitors10.1016/j.electacta.2021.138848 ↗
42. Resistivity of mesopore-confined ionic liquid determined by electrochemical impedance spectroscopy10.1016/j.electacta.2021.138112 ↗
43. On the origin of capacitance dispersion of rough electrodes10.1016/S0013-4686(00)00574-0 ↗
44. Contribution of surface distributions to constant-phase-element (CPE) behavior: 1. Influence of roughness10.1016/j.electacta.2015.05.010 ↗
45. Impedance of blocking electrodes having parallel cylindrical pores with distributed radii
46. Constant-phase-element behavior caused by resistivity distributions in films, I. Theory10.1149/1.3499564 ↗
47. Contribution of surface distributions to constant-phase-element (CPE) behavior: 3. Adsorbed intermediates10.1016/j.electacta.2017.08.081 ↗
48. On a possible physical origin of the constant phase element10.1016/j.electacta.2015.11.142 ↗
49. The influence of anomalous diffusion on the impedance response of LiCoO2|C batteries10.1016/j.jpowsour.2015.05.047 ↗