Quantifying morphological variability and operating evolution in SOFC anode microstructures
Source abstract
Abstract
Abstract Direct correlation of SOFC performance with electrode evolution requires compared electrodes to have quantifiably similar initial microstructures. Commercial SOFCs do not satisfy this requirement. Therefore, methods are explored to quantify morphological differences between many micro-scale sub-volumes taken from large meso-scale volumes of commercial anodes exposed to different operating conditions. Three microstructures were reconstructed in 3D using plasma-FIB SEM serial sectioning data (≈1002 μm2 in-plane and 6–9 μm in thickness, t) from two anodes exposed to different operating histories. 50 to 100 rectangular prism sub-volumes (122 μm2 x t μm) from each are compared using ANOVA methods. Variations in the local volume fractions and/or particles sizes render each of the three reconstructions statistically non-overlapping for many of their global averages, mesoscale distributions, and comparisons using ANOVA. However, the YSZ backbones are self-similar and scale adjusted electrodes are shown to have many comparable ANOVA sub-volumes, which allows for a quantification of relative microstructural changes in Ni/pore distributions. Ni coarsening and de-wetting of the YSZ phase are consistent with relative changes observed in the operated anode. Caution is nevertheless required in comparing commercial electrodes because spatial variations in the microstructural distributions are as significant as, or greater than, those from operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Impact of anode microstructure on SOFC10.1126/science.1176404 ↗
2. Effect of composition of La0.8Sr0.2MnO3-Y2O3-stabilized ZrO2cathodes. Correlating three-dimensional microstructure and polarization resistance10.1016/j.jpowsour.2009.09.074 ↗
3. Simulation of the diffusional impedance and application to the characterization of electrodes with complex microstructures10.1016/j.electacta.2020.136534 ↗
4. Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells10.1016/j.jpowsour.2018.11.095 ↗
5. Numerical simulation of La0.6Sr0.4Co0.2Fe0.8O3- Gd0.1Ce0.9O1.95 composite cathodes with micro pillars10.1016/j.ijhydene.2019.01.171 ↗
6. Modeling of solid oxide fuel cell ( SOFC ) electrodes from fabrication to operation : microstructure optimization via arti fi cial neural networks and multi-objective genetic algorithms10.1016/j.enconman.2019.111916 ↗
7. Linking the microstructure, performance and durability of Ni-yttria-stabilized zirconia solid oxide fuel cell anodes using three-dimensional focused ion beam-scanning electron microscopy imaging10.1016/j.scriptamat.2010.09.025 ↗
8. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
9. Microstructural design considerations for Li-ion battery systems10.1016/j.cossms.2012.03.002 ↗
10. A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells10.1016/j.jpowsour.2009.06.073 ↗
11. Resolving electrode morphology ’ s impact on platinum group metal- free cathode performance using nano-CT of 3D hierarchical pore and ionomer distribution10.1021/acsami.6b08844 ↗
12. Durability and Stability of LSCF Composite Cathode for Intermediate-Low Durability and stability of LSCF composite cathode for intermediate-low temperature of solid oxide fuel cell ( IT-LT SOFC ): short Review10.4028/www.scientific.net/AMR.893.732 ↗
13. Morphological analysis of polymer electrolyte fuel cell electrode using high resolution X-ray computed tomography and subsequent performance analysis10.1149/05801.0481ecst ↗
14. Evaluation of La0.6Sr0.4Co0.2Fe0.8O3-Gd0.1Ce0.9O1.95 composite cathode with three dimensional microstructure reconstruction10.1016/j.jpowsour.2016.12.113 ↗
15. O’hayre · 2016
16. 2004
17. Minh · 1995
18. Solid oxide electrolyte fuel cell review10.1016/0272-8842(95)00101-8 ↗
19. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
20. Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
21. Microstructure degradation of LSM-YSZ cathode in SOFCs operated at various conditions10.1016/j.ssi.2011.10.020 ↗
22. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
23. Fundamental mechanisms involved in the degradation of nickel – yttria stabilized zirconia ( Ni – YSZ ) anode during solid oxide fuel cells operation : a review10.1016/j.ceramint.2015.09.006 ↗
24. Microstructure degradation of cermet anodes for solid oxide fuel cells : quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
25. Degradation mechanisms of La – Sr – Co – Fe – O 3 SOFC cathodes10.1149/1.2266160 ↗
26. A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells10.1016/j.ijhydene.2013.09.045 ↗
27. Tailoring SOFC electrode microstructures for improved performance10.1002/aenm.201800120 ↗
28. Evaluating microstructure evolution in an SOFC electrode using digital volume correlation10.1039/C8SE00292D ↗
29. Simulation-based microstructural optimization of solid oxide fuel cell for low temperature operation10.1016/j.ijhydene.2016.05.177 ↗
30. Solid oxide electrochemical systems: material degradation processes and novel mitigation approaches10.3390/ma11112169 ↗
31. Modelling the effects of measured anode triple-phase boundary densities on the performance of micro-tubular hollow fiber SOFCs10.1016/j.ssi.2009.10.013 ↗
32. The relationship between overpotential and the three phase boundary length10.1016/0167-2738(96)00284-6 ↗
33. Reaction kinetics and microstructure of the solid oxide fuel cells air electrode Lao.6Cao.4MnO3/YSZ10.1149/1.2085891 ↗
34. Solid oxide fuel cell Ni – YSZ Anodes : effect of composition on microstructure and performance10.1149/1.2960528 ↗
35. 3D electrode microstructure reconstruction and modelling10.1149/1.3205650 ↗
36. Microstructural analysis of a solid oxide fuel cell anode using focused ion beam techniques coupled with electrochemical simulation10.1016/j.jpowsour.2010.02.047 ↗
37. Microstructure degradation of Ni/CGO anodes for solid oxide fuel cells after long operation time using 3D reconstructions by FIB tomography10.1039/C7CP02186K ↗
38. Experimental and theoretical investigation of degradation mechanisms by particle coarsening in sofc electrodes10.1002/fuce.200800192 ↗
39. 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 Year of electrolysis testing 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 Year of electrolysis testing10.1149/2.1281902jes ↗
40. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
41. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
42. Studies of solid oxide fuel cell electrode evolution using 3D tomography10.1002/fuce.201200177 ↗
43. Degradation study by 3D reconstruction of a nickel-yttria stabilized zirconia cathode after high temperature steam electrolysis operation10.1016/j.jpowsour.2014.07.066 ↗
44. Quantitative characterization of SOFC nickel-YSZ anode microstructure degradation based on focused-ion-beam 3D-reconstruction technique10.1149/2.045203jes ↗
45. Microstructure degradation of LSM/YSZ cathodes for solid oxide fuel cells aged in stack after long operation time10.1149/2.0581713jes ↗
46. Quantitative characterization of SOFC nickel-YSZ anode microstructure degradation based on focused-ion-beam 3D-reconstruction technique10.1149/2.045203jes ↗
47. Phase wettability and microstructural evolution in solid oxide fuel cell anode materials10.1016/j.actamat.2014.06.037 ↗
48. Three dimensional characterization of nickel coarsening in solid oxide cells via ex-situ ptychographic nano-tomography10.1016/j.jpowsour.2018.02.031 ↗
49. Three-dimensional microstructural evolution of Ni- Yttria-Stabilized Zirconia solid oxide fuel cell anodes at elevated temperatures10.1149/2.084311jes ↗
50. Observing the microstructural evolution of Ni-Yttria-stabilized zirconia solid oxide fuel cell anodes10.1016/j.actamat.2015.09.055 ↗
51. Quantifying intermediate-frequency heterogeneities of SOFC electrodes using X-ray computed tomography10.1111/jace.14775 ↗
52. The orientation distributions of lines, surfaces, and interfaces around three-phase boundaries in solid oxide fuel cell cathodes10.1111/j.1551-2916.2011.04673.x ↗
53. Mesoscale characterization of local property distributions in heterogeneous electrodes10.1016/j.jpowsour.2018.03.025 ↗
54. Towards quantification of local electrochemical parameters in microstructures of solid oxide fuel cell electrodes using high performance computations10.1149/07801.2711ecst ↗
55. Quantitative analysis of multi-scale heterogeneities in complex electrode microstructures10.1149/2.0102005JES ↗
56. An efficient approach for prediction of Warburg-type resistance under working currents10.1016/j.ijhydene.2018.06.076 ↗
57. Degradation of anode supported SOFCs as a function of temperature and current load10.1149/1.2193400 ↗
58. A method for quantitative 3D mesoscale analysis of solid oxide fuel cell microstructures using Xe-plasma focused ion beam (PFIB) coupled with SEM10.1149/07801.2159ecst ↗
59. Determining the representative volume element size for three-dimensional microstructural material characterization. Part 2: application to experimental data10.1016/j.jpowsour.2015.02.052 ↗
60. Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data10.1016/j.electacta.2012.04.133 ↗
61. Determining the representative volume element size for three-dimensional microstructural material characterization. Part 1: predictive models10.1016/j.jpowsour.2015.02.035 ↗
62. Methodology and application of oneway ANOVA
63. Montgomery · 2003
64. Stephens · 2013
65. Smalheiser · 2017
66. Understanding one-way ANOVA using conceptual figures10.4097/kjae.2017.70.1.22 ↗
67. Rational design of hierarchically nanostructured electrodes for solid oxide fuel cells10.1016/j.jpowsour.2016.09.156 ↗
68. Connecting microstructural coarsening processes to electrochemical performance in solid oxide fuel cells : an integrated modeling approach10.1016/j.jpowsour.2013.10.121 ↗
69. Effect of preparation variables of plaster molds for slip casting of sanitary ware10.1016/j.bsecv.2017.06.001 ↗
70. Influence of slip preparation and casting conditions on aqueous tape casting of Al2O310.1016/S0025-5408(01)00683-3 ↗
71. Fundamental mechanisms involved in the degradation of nickel–yttria stabilized zirconia (Ni–YSZ) anode during solid oxide fuel cells operation: a review10.1016/j.ceramint.2015.09.006 ↗
72. Comparative study on performance stability of Ni–oxide cermet anodes under humidified atmospheres in solid oxide fuel cells10.1149/2.053208jes ↗
73. Quantification of the degradation of Ni-YSZ anodes upon redox cycling10.1016/j.jpowsour.2017.11.024 ↗