Spray-dried K3V(PO4)2/C composites as novel cathode materials for K-ion batteries with superior electrochemical performance
Source abstract
Abstract
Abstract Intensive efforts are needed to find an alternative to replace Li-ion batteries. Among the potential candidates, K-ions batteries (KIBs) have received a lot of interest thanks to the low reduction potential and low cost of potassium due to the high abundance and broad distribution of potassium sources. In this regard, the development of high performance cathode materials has raised some challenges. Phosphate-based materials are considered as the most promising cathode materials for KIBs owing to their high structural stability upon cycling, high ionic conductivity and high insertion potential. Here, K3V(PO4)2 (KVP) and K3V(PO4)2/C composites are reported as new cathode materials for KIBs with a high theoretical capacity (150 mAh.g−1) and a high working potential (3.5–4 V). The pristine KVP and KVP/C composite materials are obtained by spray-drying process. The influence of grinding process on the structural, morphological and the electrochemical properties is investigated. The composite with carbon nanotubes (KVP/20CNT) demonstrates the best reversible capacity of 101 mAh.g−1 at C/40 using 0.8 M KPF6 in PC +10 wt% FEC as electrolyte. Different characterization techniques are combined to investigate the structural and morphological properties of the materials such as XRD, SEM, TEM and Laser granulometry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Chemistry and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Research development on sodium-ion batteries10.1021/cr500192f ↗
2. Towards K-ion and Na-ion batteries as “beyond Li-ion10.1002/tcr.201700057 ↗
3. Emerging non-aqueous potassium-ion batteries: challenges and opportunities10.1021/acs.chemmater.7b01764 ↗
4. Recent progress and perspective in electrode materials for K-ion batteries
5. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors10.1016/j.elecom.2015.09.002 ↗
6. A novel K-ion battery: hexacyanoferrate(ii)/graphite cell10.1039/C7TA00220C ↗
7. Organic electrode for non-aqueous potassium-ion batteries10.1016/j.nanoen.2015.10.015 ↗
8. P2- and P3-KxCoO2 as an electrochemical potassium intercalation host10.1039/C7CC00806F ↗
9. Improving potassium-ion batteries by optimizing the composition of prussian blue cathode10.1021/acsaem.9b01097 ↗
10. Crystallite size control of prussian white analogues for nonaqueous potassium-ion batteries10.1021/acsenergylett.7b00179 ↗
11. Earth abundant Fe/Mn-based layered oxide interconnected nanowires for advanced K-ion full batteries10.1021/acs.nanolett.6b04611 ↗
12. Sodium iron sulfate alluaudite solid solution for Na-ion batteries: moving towards stoichiometric Na2Fe2(SO4)310.1039/C9TA00116F ↗
13. Sodium vanadium (III) fluorophosphate/carbon nanotubes composite (NVPF/CNT) prepared by spray-drying: good electrochemical performance thanks to well-dispersed CNT network within NVPF particles10.1016/j.electacta.2017.01.026 ↗
14. Na2FePO4F/multi-walled carbon nanotubes for lithium-ion batteries: operando Mössbauer study of spray-dried composites10.1016/j.solmat.2015.09.005 ↗
15. Spray-drying as a tool to disperse conductive carbon inside Na2FePO4F particles by addition of carbon black or carbon nanotubes to the precursor solution
16. Amorphous iron phosphate: potential host for various charge carrier ions10.1038/am.2014.98 ↗
17. Potassium-ion intercalation in anti-NASICON-type iron molybdate Fe2(MoO4)3, Electrochem
18. A vanadium-based metal-organic phosphate framework material K 2 [(VO) 2 (HPO 4 ) 2 (C 2 O 4 )] as a cathode for potassium-ion batteries10.1039/C8CC08734B ↗
19. Partial replacement of K by Rb to improve electrochemical performance of K3V2(PO4)3 cathode material for potassium-ion batteries10.1016/j.jallcom.2019.152379 ↗
20. K3V2(PO4)2F3as a robust cathode for potassium-ion batteries10.1016/j.ensm.2018.04.026 ↗
21. Constructing the best symmetric full K-ion battery with the NASICON-type K 3 V 2 (PO 4 ) 310.1016/j.nanoen.2019.03.085 ↗
22. Nanocubic KTi2(PO4)3 electrodes for potassium-ion batteries10.1039/C6CC06177J ↗
23. Polyanionic compounds for potassium-ion batteries10.1002/tcr.201800143 ↗
24. Structural, electrochemical and magnetic properties of a novel KFeSO4F polymorph10.1039/C5TA05548B ↗
25. Preparation and characterization of a stable FeSO4F-based framework for alkali ion insertion electrodes10.1021/cm302428w ↗
26. KVP2O7 as a robust high-energy cathode for potassium-ion batteries: pinpointed by a full screening of the inorganic registry under specific search conditions10.1002/aenm.201703099 ↗
27. Effect of concentrated diglyme-based electrolytes on the electrochemical performance of potassium-ion batteries10.1021/acsaem.9b01173 ↗
28. KVPO4F and KVOPO4 toward 4 volt-class potassium-ion batteries10.1039/C6CC10280H ↗
29. AVPO4F (A = Li, K): a 4 v cathode material for high-power rechargeable batteries10.1021/acs.chemmater.5b04065 ↗
30. A general low-temperature synthesis route to polyanionic vanadium phosphate fluoride cathode materials: AVPO 4 F (A = Li, Na, K) and Na 3 V 2 (PO 4 ) 2 F 310.1039/C9QM00325H ↗
31. A new strategy for high-voltage cathodes for K-ion batteries: stoichiometric KVPO4F10.1002/aenm.201801591 ↗
32. Effect of the electrode/electrolyte interface structure on the potassium-ion diffusional and charge transfer rates: towards a high voltage potassium-ion battery10.1016/j.electacta.2017.11.131 ↗
33. A new vanadium III potassium phosphate with a cage structure: K6V2P4O1610.1016/0022-4596(91)90080-2 ↗
34. Novel K3V2(PO4)3/C bundled nanowires as superior sodium-ion battery electrode with ultrahigh cycling stability10.1002/aenm.201500716 ↗
35. Fundamental parameters approach to x-ray line-profile fitting10.1107/S0021889891010804 ↗
36. Boukamp, A package for impedance/admittance data analysis
37. Study of the structural and thermal stability of Li0.3Co 2/3Ni1/6Mn1/6O210.1016/j.electacta.2014.05.058 ↗
38. High temperature phase transition in NH4H2PO410.1016/0038-1098(79)90733-6 ↗
39. TGA-FTIR study of the pyrolysis of sodium citrate and its effect on the pyrolysis of tobacco and tobacco/SBA-15 mixtures under N2 and air atmospheres10.1002/jsfa.9121 ↗
40. Synthesis, characterization and gas sensing properties of graphene oxide-multiwalled carbon nanotube composite10.1016/j.jmst.2016.03.017 ↗
41. Structural evolution of hydrothermally derived reduced graphene oxide
42. Phosphorus and nitrogen dual doped and simultaneously reduced graphene oxide with high surface area as efficient metal-free electrocatalyst for oxygen reduction10.3390/catal5020981 ↗
43. Template-directed materials for rechargeable lithium-ion batteries10.1021/cm702091q ↗
44. Hydrothermal synthesis in presence of carbon black: particle-size reduction of iron hydroxyl phosphate hydrate for Li-ion battery10.1016/j.electacta.2017.08.006 ↗
45. Spray-drying as a tool to disperse conductive carbon inside Na2FePO4F particles by addition of carbon black or carbon nanotubes to the precursor solution10.1007/s10008-017-3717-x ↗
46. Modeling particle formation at spray drying using population balances10.1080/07373930600558912 ↗
47. Hydrothermal synthesis in presence of carbon black: particle-size reduction of iron hydroxyl phosphate hydrate for Li-ion battery10.1016/j.electacta.2017.08.006 ↗
48. Electrochemical impedance study of the solid electrolyte interphase in MnSn2 based anode for Li-ion batteries10.1016/j.electacta.2015.10.078 ↗
49. A high power − high energy Na 3 V 2 ( PO 4 ) 2 F 3 sodium Cathode : investigation of transport parameters
50. Process investigation, electrochemical characterization and optimization of LiFePO4/C composite from mechanical activation using sucrose as carbon source10.1016/j.electacta.2008.11.012 ↗
51. Optimized performances of core-shell structured LiFePO4/C nanocomposite10.1016/j.jpowsour.2011.05.046 ↗