journal article·2019-11

Electrochemically activated Na–ZnCl2 battery using a carbon matrix in the cathode compartment

Younki Lee, Han-Jun Kim, Dong-Jin Byun, Kwon-Koo Cho, Jou-Hyeon Ahn, Chang-Sam Kim

Publisher page

Abstract

Abstract Sodium-metal chloride batteries have been highlighted as one of the massive energy storage systems for its intrinsically excellent safety and the use of abundant sodium. Nickel and sodium chloride have been the most studied for cathode materials because this chemistry allows high open-circuit voltage and high energy density among the candidates. However, there is a need to reduce the material cost due to costly nickel powders which are used in large quantities for the electrical connection in the cathode. This study proposes an electrochemically activated Na/ZnCl2 battery using less-expensive carbon felt to maintain efficient electron percolation in the cathode and evaluates the charge-discharge behavior and cell impedance. The Na/ZnCl2 cell, which has a capacity of 220 mAh with a new cathode configuration, significantly reduces the charge transfer resistance compared to conventional cells by approximately 42% and 62% at the 10th and 51st cycles, respectively. When the designed capacity increases to 440 mAh with the constant active area of an electrolyte, the reduction of resistance becomes apparent. This enhancement occurs because the carbon felt sufficiently conducts electrons in the cathode compartment and results in a uniform electrode reaction, which is also revealed in our analysis of the microstructure of the electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. The sodium/sulphur battery10.1016/0378-7753(84)80080-4 ↗
2. Electrochemical energy storage for green grid.pdf10.1021/cr100290v ↗
3. Electrical energy storage for the Grid : a battery of choices10.1126/science.1212741 ↗
4. The sodium/nickel chloride (ZEBRA) battery10.1016/S0378-7753(01)00891-6 ↗
5. Advances in ZEBRA batteries10.1016/j.jpowsour.2003.09.039 ↗
6. Advanced intermediate temperature sodium-nickel chloride batteries with ultra-high energy density
7. Development of sodium-sulfur batteries10.1111/j.1744-7402.2004.tb00179.x ↗
8. Main challenges for high performance NAS battery: materials and interfaces10.1002/adfm.201200473 ↗
9. High energy density Na e S/NiCl 2 hybrid battery10.1016/j.jpowsour.2012.09.108 ↗
10. Advanced high-temperature batteries10.1016/0378-7753(90)85026-9 ↗
11. High temperature versus low temperature Zebra (Na/NiCl 2) cell performance10.1016/j.jpowsour.2012.01.125 ↗
12. Enhanced cycle performance of a Na/NiCl2 battery based on Ni particles encapsulated with Ni3S2 layer10.1016/j.jpowsour.2016.11.091 ↗
13. Development of intermediate temperature sodium nickel chloride rechargeable batteries using conventional polymer sealing technologies10.1016/j.jpowsour.2017.02.059 ↗
14. Experimental studies of transition metal chloride electrodes in undivided cells using molten NaAlCl4 electrolyte10.1016/0378-7753(91)80079-D ↗
15. Novel ternary molten salt electrolytes for intermediate-temperature sodium/nickel chloride batteries10.1016/j.jpowsour.2012.07.089 ↗
16. An advanced Na–FeCl2 ZEBRA battery for stationary energy storage application10.1002/aenm.201500357 ↗
17. “Ni-Less” cathodes for high energy density, intermediate temperature Na–NiCl2Batteries10.1002/admi.201701592 ↗
18. The role of FeS in initial activation and performance degradation of Na-NiCl2batteries10.1016/j.jpowsour.2014.08.106 ↗
19. Effect of cathode thickness on the performance of planar Na-NiCl2battery10.1016/j.jpowsour.2017.07.029 ↗
20. Tao · 2007 · 235
21. Advanced Na-NiCl2 battery using nickel-coated graphite with core-shell microarchitecture10.1021/acsami.7b00271 ↗
22. A novel low-cost sodium-zinc chloride battery10.1039/c3ee24244g ↗
23. Microstructure design of metal composite for active material in sodium nickel-iron chloride battery10.1016/j.jpowsour.2016.08.068 ↗
24. High temperature sodium - zinc chloride batteries with sodium beta" - alumina solid electrolyte (BASE)10.1149/1.2811944 ↗
25. Effect of Zn/NaCl ratios on the charge/discharge performance in Na-ZnCl2 battery10.6111/JKCGCT.2015.25.2.074 ↗
26. An intermediate-temperature high-performance Na–ZnCl 2 battery10.1021/acsomega.8b02112 ↗
27. Tao
28. Planar ZEBRA battery for renewable integration and grid applications
29. Advanced intermediate temperature sodium-nickel chloride batteries with ultra-high energy density
30. Huggins · 2009
31. Park · 2012
32. An advanced Na-NiCl2battery using bi-layer (dense/micro-porous) β″-alumina solid-state electrolytes10.1016/j.jpowsour.2018.06.039 ↗