journal article·2017-09

Cell performance, impedance, and various resistances measurements of an anode-supported button cell using a new pressurized solid oxide fuel cell rig at 1–5 atm and 750–850 °C

P.C. Wu, S.S. Shy

Publisher page

Abstract

Abstract We report a novel pressurized solid oxide fuel cell (SOFC) rig that overcomes the stagnation flow problem in classic button cell setups, allowing fuel and air to distribute uniformly over anode and cathode surfaces. Power and impedance measurements of an anode-supported full button cell (ASC; NiO-YSZ/YSZ/LSM-GDC-LSM) operated at p = 1–5 atm and T = 750–850 °C show that both pressurization and increasing temperature enhance the cell performance, which are explained by the Nyquist plots consisted of a high frequency arc with characteristic frequencies (fc) around 100–1000 Hz relating to the cathode activation overvoltage and a low frequency arc with fc around 10–30 Hz corresponding to the anode concentration overvoltage. The activation overvoltage decreases with increasing p and/or T, while the concentration overvoltage decreases with increasing p but rather insensitive to T. We find that the activation overvoltage is the major source for the polarization resistances contributing 63%–82% depending on pressure, temperature, and current density, while the concentration overvoltage is a minor one contributing 18%–37% for the present ASC. These results and the rig should be useful for our understanding and further studies of pressurized SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Singhal · 2003
2. U.S. DOE · 2004
3. Saratoga Business Journal, GE Global Research Unit Creating Plant In Malta For Manufacturing Its Fuel Cells, http://www.saratoga.com/saratogabusinessjournal/2014/08/ge-global-research-unit-creating-plant-in-malta.html), 2014.
4. Tubular solid oxide fuel cell/gas turbine hybrid cycle power systems: Status10.1115/1.1473148 ↗
5. A high-efficiency solid oxide fuel cell hybrid power system using the Mercury 50 advanced turbine systems gas turbine10.1115/1.1499727 ↗
6. Extremely high-efficiency thermal power system - solid oxide fuel cell (SOFC) triple combined-cycle system
7. An experimental investigation of pressurized planar solid oxide fuel cells using two different flow distributors10.1016/j.jpowsour.2013.10.127 ↗
8. Effects of pressurization and temperature on power generating characteristics and impedances of anode-supported and electrolyte-supported planar solid oxide fuel cells10.1016/j.jpowsour.2015.08.080 ↗
9. Larminie · 2003
10. Gas concentration impedance of solid oxide fuel cell anodes I. Stagnation point flow geometry10.1149/1.2205150 ↗
11. Factors affecting limiting current in solid oxide fuel cells or debunking the myth of anode diffusion polarization10.1016/j.jpowsour.2011.01.035 ↗
12. Pressurized testing of a planar solid oxide fuel cell stack10.1016/j.ijhydene.2013.08.058 ↗
13. Characteristics of anodic polarization of solid oxide fuel cells under pressurized conditions10.1016/j.ssi.2004.05.029 ↗
14. Design and evaluation of combined cycle system with solid oxide fuel cell and gas turbine10.1016/S0016-2361(99)00293-8 ↗
15. Modelling of an indirect internal reforming solid oxide fuel cell10.1016/S0009-2509(02)00058-1 ↗
16. Thermal modeling of a small anode supported solid oxide fuel cell10.1016/S0378-7753(03)00102-2 ↗
17. Pressurized solid oxide fuel cells: experimental studies and modeling10.1016/j.jpowsour.2010.09.100 ↗
18. Numerical study of a flat-tube high power density solid oxide fuel cell: Part I. Heat/mass transfer and fluid flow10.1016/j.jpowsour.2004.08.036 ↗
19. A finite element analysis modeling tool for solid oxide fuel cell development: coupled electrochemistry, thermal and flow analysis in MARC®10.1016/j.jpowsour.2003.11.074 ↗
20. A macro-level model for determining the performance characteristics of solid oxide fuel cells10.1016/j.jpowsour.2004.06.051 ↗
21. Electrocatalysis in solid oxide fuel cell electrode domains10.1149/1.2044089 ↗
22. Polarization effects in intermediate temperature, anode-supported solid oxide fuel cells10.1149/1.1391566 ↗
23. Parametric study of solid oxide fuel cell performance, Energy Convers
24. A review of standardising SOFC measurement and quality assurance at FZJ10.1016/j.jpowsour.2006.12.029 ↗
25. The impact of flow distributors on the performance of planar solid oxide fuel cell10.1016/j.jpowsour.2010.04.073 ↗
26. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness10.1016/S0378-7753(00)00556-5 ↗
27. An electrode kinetics study of H2 oxidation on Ni/Y2O3–ZrO2 cermet electrode of the solid oxide fuel cell10.1016/S0167-2738(99)00124-1 ↗
28. Electrochemical impedance measurement and analysis of anodic concentration polarization for pressurized solid oxide fuel cells10.1149/2.078404jes ↗
29. Gas diffusion impedance in characterization of solid oxide fuel cell anodes10.1149/1.1392015 ↗
30. Hayre · 2009
31. Simulation of a tubular solid oxide fuel cell stack operating on biomass syngas using Aspen plus10.1149/1.3407524 ↗
32. SOFC LSM: YSZ cathode degradation induced by moisture: an impedance spectroscopy study10.1016/j.ssi.2011.02.019 ↗
33. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
34. The impact of flow distributors on the performance of solid oxide fuel cell—Part II: electrochemical impedance measurements10.1016/j.jpowsour.2011.04.021 ↗
35. A stability study of Ni/Yttria-Stabilized Zirconia anode for direct ammonia solid oxide fuel cells10.1021/acsami.5b11122 ↗