journal article·2024-10

Stabilizing the interface between high-Ni oxide cathode and Li6PS5Cl for all-solid-state batteries via dual-compatible halides

Hyohyun Cha, Jonghyeok Yun, Siwon Kim, Junhee Kang, Minhyeong Cho, Woosuk Cho, Jong-Won Lee

Publisher page

Abstract

All-solid-state batteries (ASSBs) with enhanced safety are promising next-generation energy storage systems for electric vehicles. However, the utilization of ASSBs is hindered by the high interfacial resistances between highNi-oxide cathodes and sulfide solid electrolytes (SEs). Passivating interphases form on the cathode in contact with the SE upon charging, deteriorating the power capability and cyclability. Inspired by the excellent stability of halides at high voltages, herein, we propose the interfacial engineering of LiNixCoyMnzO2 (NCM) and Li6PS5Cl (LPSCl) using Li+-conductive halides with 'dual compatibility'. The charge-transport and interfacial resistances of the halide-coated NCM (NCM@halide) electrodes are analyzed using a transmission-line-based impedance model. Impedance analyses indicate that the interfacial halide nanolayers slightly increase the Li+-transport resistance, but the NCM@halide electrodes exhibit considerably lower interfacial resistances than bare NCM. Furthermore, the interfacial resistance is highly dependent on the halide composition: NCM@Li2ZrCl6 2 ZrCl 6 shows a lower interfacial resistance than NCM@Li3InCl6 3 InCl 6 and NCM@Li3YCl6, 3 YCl 6 , resulting in superior rate-capability and cycling stability. The composition-dependent electrochemical properties of the NCM@halide electrodes are discussed in terms of the dual compatibility of the halides with NCM and LPSCl. This study offers an effective approach for addressing the interfacial challenges of sulfide-based ASSBs with high-Ni oxide cathodes. ; FALSE ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes10.1038/s41560-021-00952-0 ↗
2. Unveiling the critical role of interfacial ionic conductivity in all-solid-state lithium batteries10.1016/j.nanoen.2020.104686 ↗
3. Progress and perspectives on halide lithium conductors for all-solid-state Lithium Batteries10.1039/C9EE03828K ↗
4. Critical review on recently developed lithium and non-lithium anode-based solid-state lithium-ion batteries10.1016/j.jpowsour.2023.232914 ↗
5. Research progress on chloride solid electrolytes for all-solid-state batteries10.1016/j.jpowsour.2024.234051 ↗
6. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
7. In search of the best solid electrolyte-layered oxide pairing for assembling practical all-solid-state batteries10.1021/acsaem.1c02187 ↗
8. In situ formed interfacial layer for all-solid-state lithium batteries with sulfide electrolyte films10.1016/j.jpowsour.2023.233290 ↗
9. Yttrium stabilized argyrodite solid electrolyte with enhanced ionic conductivity and interfacial stability for all-soli-state batteries10.1016/j.jpowsour.2022.231846 ↗
10. Electrochemical window of the Li-ion solid electrolyte Li7La3Zr2O1210.1021/acsenergylett.6b00593 ↗
11. Tailoring grain boundary structures and chemistry of Li7La3Zr2O12 solid electrolytes for enhanced air stability10.1016/j.ensm.2022.10.044 ↗
12. Cyclic-induced deformation and the degradation of Al-doped LLZO electrolytes in all-solid-state Li-metal batteries10.1016/j.jpowsour.2023.234022 ↗
13. Status and prospects of hydroborate electrolytes for all-solid-state batteries10.1016/j.ensm.2019.08.032 ↗
14. A complex hydride lithium superionic conductor for high-energy-density all-solid-state lithium metal batteries10.1038/s41467-019-09061-9 ↗
15. Emerging halide superionic conductors for all-solid-state batteries: design, synthesis, and practical applications10.1021/acsenergylett.2c00438 ↗
16. Lithium-metal anode instability of the superionic halide solid electrolytes and the implications for solid-state batteries10.1002/anie.202015238 ↗
17. Design strategies, practical considerations, and new solution processes of sulfide solid electrolytes for all-solid-state batteries10.1002/aenm.201800035 ↗
18. New cost-effective halide solid electrolytes for all-solid-state batteries: mechano-chemically prepared Fe3+-substituted Li2ZrCl6
19. The working principle of a Li2CO3/LiNbO3 coating on NCM for thiophosphate-based all-solid-state batteries10.1021/acs.chemmater.0c04660 ↗
20. Conformal buffer layer coating on Ni-rich cathode powder via particle atomic layer deposition for all-solid-state batteries10.1021/acsaem.2c00867 ↗
21. Interface-assisted in-situ growth of halide electrolytes eliminating interfacial challenges of all-inorganic solid-state batteries10.1016/j.nanoen.2020.105015 ↗
22. Liquid electrolyte-free cathode for long-cycle life lithium–oxygen batteries10.1016/j.cej.2021.129840 ↗
23. Lithium chlorides and bromides as promising solid-state chemistries for fast ion conductors with good electrochemical stability10.1002/anie.201901938 ↗
24. Tailoring percolative conduction networks and reaction interfaces via infusion of polymeric ionic conductor for high-performance solid-state batteries10.1016/j.cej.2020.127274 ↗
25. Prospects of halide-based all-solid-state batteries: from material design to practical application
26. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type all-solid-state batteries10.1002/adma.201803075 ↗
27. Air-stable Li3InCl6 electrolyte with high voltage compatibility for all-solid-state batteries10.1039/C9EE02311A ↗
28. Deciphering the critical degradation factors of solid composite electrodes with halide electrolytes: interfacial reaction versus ionic transport
29. High-voltage superionic halide solid superionic halide solid electrolytes for all-solid-state Li-ion batteries10.1021/acsenergylett.9b02599 ↗
30. Lithium ytterbium-based halide solid electrolytes for high voltage all-solid-state batteries10.1021/acsmaterialslett.1c00142 ↗
31. Site-occupation-tuned superionic LixScCl3+x halide solid electrolytes for all-solid-state batteries10.1021/jacs.0c00134 ↗
32. Insights into bulk properties and transport mechanisms in new ternary halide solid electrolytes: first-principles calculations10.1021/acs.jpcc.1c07347 ↗
33. Stable all-solid-state lithium metal batteries enabled by machine learning simulation designed halide electrolytes10.1021/acs.nanolett.2c00187 ↗
34. A cost-effective and humidity-tolerant chloride solid electrolyte for lithium batteries10.1038/s41467-021-24697-2 ↗
35. Single- or poly-crystalline Ni-rich layered cathode, sulfide or halide solid electrolyte: which will be the winners for all-solid-state batteries?10.1002/aenm.202100126 ↗
36. Recent advances and perspectives of air stable sulfide-based solid electrolytes for all-solid-state lithium batteries10.1002/tcr.202200086 ↗
37. Aging property of halide solid electrolyte at the cathode interface
38. Evaluation of resonance acoustic mixing technology using ultra-high-performance concrete10.1016/j.conbuildmat.2017.12.217 ↗
39. Manufacture of ZPP granule using the LabRAM mixer10.6108/KSPE.2017.21.4.063 ↗
40. Chemo-mechanical failure of solid composite cathodes accelerated by high-strain anodes in all-solid-state batteries
41. All-solid-state lithium batteries with sulfide electrolytes and oxide cathodes10.1007/s41918-020-00081-4 ↗
42. Dual function Li-reactive coating from residual lithium on Ni-rich NCM cathode material for lithium-ion batteries10.1038/s41598-021-98123-4 ↗
43. Beneficial role of inherently formed residual lithium compounds on the surface of Ni-rich cathode materials for all-solid-state batteries10.1021/acsami.2c22406 ↗
44. Cathode electrode architecture with facile ion percolating network assuring interfacial integrity for high-performance solid-state batteries
45. Redox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: an XPS study10.1016/j.ssi.2016.11.029 ↗
46. Different interfacial reactivity of lithium metal chloride electrolytes with high voltage cathodes determines solid-state battery performance10.1039/D2EE00803C ↗
47. Amorphous oxyhalide matters for achieving lithium superionic conduction10.1021/jacs.3c07343 ↗
48. Slurry-coated LiNi0.8Co0.1Mn0.1O2–Li3InCl6 composite cathode with enhanced interfacial stability for sulfide-based all-solid-state batteries10.1021/acsami.3c00178 ↗
49. Achieving stable all-solid-state lithiummetal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode10.1016/j.mattod.2023.03.001 ↗
50. Overcoming the interfacial challenges of LiFePO4 in inorganic all-solid-state batteries10.1021/acsenergylett.2c02138 ↗