Efficient regeneration of waste LiFePO4 cathode material by short process low temperature plasma assisted nitrogen doped technology
Source abstract
Abstract
Recently, the increase in lithium-ion batteries has led to a significant rise in battery scrapping, raising concerns of environmental pollution and resource waste. Therefore, regenerating these discarded lithium-ion batteries has become urgent. In this work, we propose a cost-effective and efficient LiFePO 4 cathode material regeneration technology with nitrogen-doping capabilities. Through plasma discharge, high-energy particles interact with the material`s surface, initiating reactions that promote nitrogen-doping. Additionally, the reduction of Fe 3+ impurities to Fe 2+ enhances Li + embedding, thereby inhibiting Fe/Li inversion and achieving structural repair in the process. The regenerated LiFePO 4, used as the cathode material, exhibits high capacity and cycle performance. It achieves a discharge capacity of 160.2 mA h g −1 at 0.1C and maintains about 146 mA h g −1 at 1C over 200 cycles without significant degradation. Furthermore, the regeneration time is nearly five times shorter than traditional methods. This method`s low cost and short processing time provide crucial support for the recycling of waste cathode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Advancements in Battery Materials · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Research and development of electric vehicles for clean transportation10.1016/S1001-0742(08)62335-9 ↗
2. Evaluating the CO2 emission reduction effect of China’s battery electric vehicle promotion efforts10.1016/j.apr.2021.101115 ↗
3. The fall of oil Age:A scenario planning approach over the last peak oil of human history by 204010.1016/j.petrol.2019.106827 ↗
4. Covalent sulfur/CoS2-decorated honeycomb-like carbon hierarchies for high-performance sodium storage with ultra-long high-rate cycling stability10.1016/j.jallcom.2023.170866 ↗
5. Enhancing lithium-ion storage performance of hollow CoS2/MoS2 nanospheres via N-doped carbon-coating10.1016/j.est.2023.108639 ↗
6. Introducing hybrid defects of silicon doping and oxygen vacancies into MOF‐derived TiO2–X@Carbon nanotablets toward high‐performance sodium‐ion storage10.1002/smll.202302831 ↗
7. Recycling of lithium iron phosphate batteries: status, technologies, challenges, and prospects10.1016/j.rser.2022.112515 ↗
8. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
9. Recent progress and perspectives on bi-functional oxygen electrocatalysts for advanced rechargeable metal–air batteries10.1039/C6TA00173D ↗
10. Polyphosphazene-derived P/S/N-doping and carbon-coating of yolk-shelled CoMoO4 nanospheres towards enhanced pseudocapacitive lithium storage10.1016/j.jcis.2023.03.014 ↗
11. Surface and interface engineering of noble-metal-free electrocatalysts for efficient energy conversion processes10.1021/acs.accounts.6b00635 ↗
12. Review of design considerations and technological challenges for successful development and deployment of plug-in hybrid electric vehicles10.1016/j.rser.2009.11.001 ↗
13. A comprehensive review of battery modeling and state estimation approaches for advanced battery management systems10.1016/j.rser.2020.110015 ↗
14. Storage technologies for electric vehicles
15. Recent development of low temperature plasma technology for lithium-ion battery materials10.1016/j.jpowsour.2023.233599 ↗
16. Crystal orientation tuning of LiFePO4 nanoplates for high rate lithium battery cathode materials10.1021/nl3027839 ↗
17. Past and present of LiFePO4: from fundamental research to industrial applications10.1016/j.chempr.2018.12.012 ↗
18. Processes and technologies for the recycling and recovery of spent lithium-ion batteries10.1016/j.rser.2015.12.363 ↗
19. Rational design of atomic‐layer‐deposited LiFePO4 as a high‐performance cathode for lithium‐ion batteries10.1002/adma.201401805 ↗
20. Burgeoning prospects of spent lithium‐ion batteries in multifarious applications10.1002/aenm.201802303 ↗
21. A mini-review on metal recycling from spent lithium ion batteries10.1016/j.eng.2018.05.018 ↗
22. Ambient‐pressure relithiation of degraded LixNi0.5Co0.2Mn0.3O2 (0 < x < 1) via eutectic solutions for direct regeneration of lithium‐ion battery cathodes10.1002/aenm.201900454 ↗
23. A critical review and analysis on the recycling of spent lithium-ion batteries10.1021/acssuschemeng.7b03811 ↗
24. Direct regeneration of recycled cathode material mixture from scrapped LiFePO4 batteries10.1016/j.jpowsour.2017.01.118 ↗
25. Increased residual lithium compounds guided design for green recycling of spent lithium-ion cathodes10.1039/D0EE03914D ↗
26. Plasma-assisted synthesis and surface modification of electrode materials for renewable energy10.1002/adma.201705850 ↗
27. Plasma surface modification of materials and their entrapment of water contaminant: a review, Plasma Process10.1002/ppap.201600218 ↗
28. Vertical nanostructure arrays by plasma etching for applications in biology, energy, and electronics10.1016/j.nantod.2013.04.008 ↗
29. Gas plasmas and plasma modified materials in medicine10.2478/v10136-009-0013-9 ↗
30. Nonthermal plasma technology as a versatile strategy for polymeric biomaterials surface modification: a review10.1021/bm900186s ↗
31. Surface modification of biomaterials using plasma immersion ion implantation and deposition10.1098/rsfs.2012.0003 ↗
32. Solvent‐free manufacturing of lithium‐ion battery electrodes via cold plasma10.1002/eem2.12503 ↗
33. N plasma treatment on graphene oxide-MoS2 composites for improved performance in lithium ion batteries10.1016/j.matchemphys.2019.122169 ↗
34. Plasma-assisted sulfur doping of LiMn2O4 for high-performance lithium-ion batteries10.1021/acs.jpcc.5b10298 ↗
35. Direct regeneration of spent lithium iron phosphate via a low-temperature molten salt process coupled with a reductive environment10.1021/acs.iecr.1c05034 ↗
36. Environmental-friendly low-cost direct regeneration of cathode material from spent LiFePO410.1016/j.jallcom.2022.166612 ↗
37. Insights on the delithiation/lithiation reactions of Li Mn0.8Fe0.2PO4 mesocrystals in Li+ batteries by in situ techniques10.1016/j.nanoen.2017.07.016 ↗
38. Recycling and crystal regeneration of commercial used LiFePO4 cathode materials10.1016/j.electacta.2019.135323 ↗
39. Direct and rapid regeneration of spent LiFePO4 cathodes via a high-temperature shock strategy10.1016/j.jpowsour.2023.233697 ↗
40. Biological phytic acid guided formation of monodisperse large-sized carbon@LiFePO4/graphene composite microspheres for high-performance lithium-ion battery cathodes10.1016/j.cej.2018.06.073 ↗
41. Improved performance of LiFePO4 cathode for Li-ion batteries through percolation studies10.1016/j.electacta.2017.06.172 ↗
42. Functionalization of MWCNTs by plasma treatment and use as conductive additives for LiFePO4 electrode10.1016/j.jtice.2018.04.026 ↗
43. High-performance LiFePO4/C electrode with polytetrafluoroethylene as an aqueous-based binder10.1016/j.jpowsour.2015.08.074 ↗
44. Direct regeneration and performance of spent LiFePO4 via a green efficient hydrothermal technique10.1016/j.jallcom.2022.166487 ↗
45. Economical and low-carbon regeneration of spent LiFePO4 materials by hydrothermal relithiation10.1016/j.jallcom.2023.169660 ↗
46. Direct regeneration of waste LiFePO4 cathode materials with a solid-phase method promoted by activated CNTs10.1016/j.wasman.2022.12.002 ↗